1. Увод
This manual provides essential information for the installation, operation, and maintenance of your BATRIBBIKE KD21C E-bike Intelligent LCD Display. Please read this manual thoroughly before use to ensure proper function and safety.
Важне информације о безбедности
⚠️ Please be aware of potential fire risks associated with e-bike battery systems. Always follow the instruction manual for charging and storage of your e-bike battery and related components.
2. Производ је готовview
The BATRIBBIKE KD21C is an intelligent LCD display designed for electric bicycles, providing essential information and control over your e-bike's functions. It features a clear LCD screen and intuitive button controls.
Компоненте екрана
- Екран: Shows speed, battery level, assist level, and other ride data.
- Дугме „М“: Mode/Power button.
- Дугме „+“: Increase assist level or navigate menus.
- Дугме „-“: Decrease assist level or navigate menus.
3. Подешавање и инсталација
The KD21C display is a customized product. For specific installation instructions tailored to your e-bike system, it is highly recommended to contact the seller or your e-bike manufacturer.
General Installation Steps (Consult your e-bike manual for specifics):
- Монтажа дисплеја: Secure the display to your handlebar using the integrated mounting bracket. Ensure it is positioned for easy viewing and access to buttons.
- Повезивање кабла: Locate the corresponding connector on your e-bike's wiring harness. Carefully align and connect the display's cable to the e-bike system. Ensure a secure and tight connection.
- Управљање кабловима: Route the cable neatly along the handlebar and frame, securing it with zip ties or cable clips to prevent interference with moving parts and protect it from damage.
4. Упутство за употребу
The KD21C display provides control over your e-bike's power and assist levels. Specific functions may vary slightly depending on your e-bike's controller configuration.
Основна операција:
- Укључивање/искључивање: Press and hold the 'M' button to power on or power off the display and your e-bike system.
- Adjust Assist Level: Use the '+' button to increase the pedal assist level and the '-' button to decrease it. The current assist level will be shown on the display.
- Cycle Through Information: Short press the 'M' button to cycle through different display modes, such as speed (current, average, max), trip distance, total distance (odometer), and battery voltage.
- Headlight Control (if applicable): Some systems allow control of headlights by pressing and holding the '+' button. Consult your e-bike's main manual.
- Walk Assist (if applicable): Some systems offer a walk assist function, often activated by pressing and holding the '-' button. Consult your e-bike's main manual.
5. Одржавање
Proper maintenance ensures the longevity and reliability of your KD21C display.
- Чишћење: Обришите екран и цasinг са меким, дamp cloth. Do not use abrasive cleaners, solvents, or spray water directly onto the display.
- Заштита: Avoid exposing the display to extreme temperatures, direct sunlight for prolonged periods, or heavy rain. While designed for outdoor use, excessive moisture can cause damage.
- Инспекција каблова: Periodically check the display cable and connector for any signs of wear, damage, or corrosion. Ensure connections are secure.
- Складиштење: When storing your e-bike for extended periods, especially in cold conditions, it is advisable to remove the e-bike battery and store it according to its own manual. The display itself can remain on the bike if protected from extreme elements.
КСНУМКС. Решавање проблема
If you encounter issues with your KD21C display, refer to the following common troubleshooting steps:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Екран се не укључује | Loose cable connection, low e-bike battery, faulty display/controller | Check all cable connections. Ensure e-bike battery is charged and properly installed. If problem persists, contact support. |
| Без брзог читања | Speed sensor issue, magnet misalignment | Check speed sensor and magnet on the wheel. Ensure they are clean and correctly aligned. |
| Assist levels not changing | Controller communication issue, button malfunction | Restart the e-bike system. Check for error codes on the display. Contact support if issue continues. |
| Дисплеј приказује код грешке | System malfunction (motor, controller, battery) | Note the error code and consult your e-bike's main manual or contact support for specific diagnostics. |
Савети за кориснике:
- Прилагођени производ: As this is a customized product, specific settings or functions might require direct communication with the seller or manufacturer for detailed guidance.
- Први преглед: Upon receiving the product, carefully inspect it for any defects or damage before installation.
- Варијација боје: Please note that due to differences in monitor settings and brightness, there may be slight variations in the perceived color of the product compared to images. This is considered normal.
7. Спецификације
| Феатуре | Детаљ |
|---|---|
| Модел | KD21C (KING-METER KM5S LCD Display) |
| Повер Суппли | 24В / 36В / 48В |
| Називна радна струја | 10мА |
| Максимална радна струја | 30мА |
| Струја цурења ван стања | |
| Радна температура | -20℃ ~ 60℃ |
| Температура складиштења | -30℃ ~ 70℃ |
| Димензије (приближно) | Дужина: 10 цм, Ширина: 6 цм, Висина: 5 цм |
| Тежина (приближно) | 0.11 кг |
8. Гаранција и подршка
For any questions, problems, or support inquiries regarding your BATRIBBIKE KD21C display, please contact the seller directly. They are committed to assisting you and resolving any issues you may encounter.
If you are not satisfied with the product upon receipt, you may discuss options with the seller. Returns for product-related issues (defects, damage, or seller fault) are typically handled by the seller. Please retain your order number and provide images or videos of any defective products when contacting support.