Приручници+

Kamoer KCM-ODM

Kamoer KCM-ODM Peristaltic Dosing Pump User Manual

1. Увод

This manual provides detailed instructions for the Kamoer KCM-ODM High Precision Small Peristaltic Dosing Pump. The KCM-ODM is designed for precise liquid transfer in various applications, featuring a stepper motor for high accuracy and small pulsation. It is suitable for both viscous and non-viscous liquids.

Kamoer KCM-ODM pump with stepper motor, 12V/24V, 420ml/min adjustable, high precision.
Figure 1: Kamoer KCM-ODM Peristaltic Dosing Pump highlighting Stepper Motor and High Precision.

Кључне карактеристике укључују:

  • Suitable for viscous and non-viscous liquid transfer.
  • High precision, small pulsation.
  • Can be placed outside the instrument panel for ground detection.
  • Simple structure, high reliability.
  • Pump tube can be quickly replaced.
  • Imported motor ensures excellent performance.

2. Спецификације

2.1 Основни параметри

  • Мотор: Корачни мотор
  • Волtage: 12V/24V (with Driver Board KMD-M42S and 2802 controller)
  • ток: 17~420ml/min (adjustable)
  • Материјал цеви: Silicone tube/PharMed BPT
  • Начин инсталације: ODMA/ODMB (ODMA: Rubber shock behind the pump; ODMB: No Rubber shock)
  • ротор: 3/6 rotors
  • Глава пумпе: Engineering plastics
  • температура: 0~40℃
  • Влажност: Мање од 80%

2.2 Tubing Selection Guide

The following table provides guidance for selecting the appropriate tubing size based on desired flow rate. All data is tested using water. For viscous or corrosive liquids, BPT tubing is recommended. Silicone tubing is available as a customized option.

Пумп ХеадTube (ID x OD)Опсег брзине (о/мин)Брзина протока (мл/мин)Tubing LifetimeTubing Working Temperature
6-rotor Pump headB14 (ID1.6 x OD4.8mm)0.1-400641000Х-51℃~132℃
3-rotor Pump headB16 (ID3.2 x OD6.4mm)0.1-4002521000Х-51℃~132℃
3-rotor Pump headB40 (ID4.0 x OD7.2mm)0.1-4003361000Х-51℃~132℃
3-rotor Pump headB25 (ID4.8 x OD8.0mm)0.1-4004521000Х-51℃~132℃

2.3 Димензије паковања

  • дужина: 10 цм
  • ширина: 10 цм
  • Висина: 10 цм
  • Тежина: 1.9 кг

3. Цомпонентс Оверview

The KCM-ODM pump system includes the main pump unit, a driver board, and a controller with user interface buttons and an LED display.

Kamoer KCM-ODM pump showing 2802 Control board and KMD-42B-P Driver board.
Слика 2: Унутрашњи view highlighting the 2802 Control board and KMD-42B-P Driver board.
Kamoer KCM-ODM pump with LED Digital Display, Flow Speed Button (Black), Start and Stop Button (Green), Flow Direction Button (Red).
Figure 3: Control interface components.

The control interface consists of:

  • ЛЕД дигитални дисплеј: Shows the rotating speed.
  • Flow Speed Button (Black): Used to adjust the flow rate.
  • Start and Stop Button (Green): Initiates or halts pump operation.
  • Flow Direction Button (Red): Changes the direction of liquid flow.
Close-up of pump head with 3/6 rotors and BPT/Silicone Tubing.
Figure 4: Pump head with tubing details.
Close-up of threaded joint for tubing connection.
Figure 5: Threaded joint for secure tubing connection.

4. Подешавање и инсталација

4.1 Tubing Connection

Connect the appropriate silicone or BPT tubing to the pump's threaded joints. Ensure a secure fit to prevent leaks.

Video 1: Demonstration of tubing connection and basic pump operation.

4.2 Електричне везе

The KCM-ODM pump comes with a KMD-M42S driver board and a 2802 controller. Refer to the wiring diagrams below for proper connection.

Image of the KMD-M42S Driver board.
Figure 6: KMD-M42S Driver Board.
Image of the 2802 Controller board.
Figure 7: 2802 Controller Board.
Image showing the 2802 Controller with connected buttons and LED display.
Figure 8: 2802 Controller with connected buttons and LED display.

4.2.1 Stepper Motor Wiring

Wiring diagram for the stepper motor showing A+ (Black line), B+ (Blue line), B- (Red line), A- (Green line).
Figure 9: Stepper Motor Wiring Diagram.

4.2.2 Controller to Driver Wiring

Wiring diagram for Controller to Driver connection, including resistor values for different voltagес.
Figure 10: Controller to Driver Wiring Diagram.

Note on Resistors:

  • R is the voltage limiting resistor in series.
  • When the interface voltage of the controller is 5V, it is unnecessary to need R; just directly connect.
  • When the interface voltage is 12V, connect a 1K resistor in series.
  • When the interface voltage is 24V, connect the 2.7K resistor in series.

4.3 Физичка инсталација

The pump can be installed using either the ODMA or ODMB method. ODMA includes a rubber shock absorber behind the pump, while ODMB does not. Ensure to specify your preferred installation method if ordering a custom configuration.

Dimensional drawing of the pump, side view и врх view with measurements.
Figure 11: Pump Dimensional Drawing (Side and Top Viewс).
Image of the pump with overall dimensions 75mm and 126mm.
Figure 12: Pump with Overall Dimensions.

4.3.1 Инсталација на зиду

For wall mounting, use the specified hole size as shown in the diagram below.

Wall plate hole size diagram showing dimensions 56.2mm x 56.2mm with R4.6 corners.
Figure 13: Wall Plate Hole Size (Unit: mm).

5. Операција

Once the pump is properly installed and connected to a power adapter, you can begin operation using the control buttons.

  1. Старт/Стоп: Притисните тастер Зелено дугме to start or stop the pump.
  2. Смер протока: Притисните тастер Црвено дугме to change the direction of the liquid flow.
  3. Flow Speed Adjustment: Користите Black button (potentiometer) to adjust the flow rate. The LED digital display will show the current rotating speed.
Kamoer KCM-ODM pump in operation, demonstrating liquid transfer between two beakers.
Figure 14: Pump in operation, transferring liquid.

6. Одржавање

Regular maintenance ensures optimal performance and longevity of your KCM-ODM pump.

6.1 Tubing Replacement

The pump is designed for quick and easy tube replacement. Regularly inspect the tubing for wear, cracks, or blockages. Replace tubing as needed to maintain flow accuracy and prevent contamination.

КСНУМКС. Решавање проблема

No specific troubleshooting information is provided in the product description. If you encounter issues, please refer to the contact information in the support section.

8. Савети корисника

Нису били доступни конкретни савети за кориснике од стране корисника.viewили питања и одговори за овај производ.

9. Гаранција и подршка

For any questions or support needs regarding your Kamoer KCM-ODM Peristaltic Dosing Pump, please contact the seller or manufacturer. They are always at your service.

Повезани документи - KCM-ODM

Преview Упутство за употребу паметне перисталтичке пумпе Kamoer UIP WIFI E
Свеобухватно корисничко упутство за Kamoer UIP WIFI E паметну перисталтичку пумпу, које детаљно описује њене карактеристике, режиме рада (континуитет, оброк, даљински), подешавања система, одржавање и техничке спецификације.
Преview Камоер УИП ВИФИ Е паметна перисталтичка пумпа: Кратки водич и техничке спецификације
Кратки водич и техничке спецификације за Kamoer UIP WIFI E паметну перисталтичку пумпу, са детаљним описом њених карактеристика, интерфејса, повезивања апликације и информација о гаранцији.
Преview Упутство за употребу паметне перисталтичке пумпе Kamoer M1-STP
Упутство за употребу за паметну перисталтичку пумпу Kamoer M1-STP, са детаљним описом њених карактеристика, режима рада (континуирани и квантитативни), калибрације и техничких параметара.
Преview KCP-KK300-D Упутство за употребу подесиве перисталтичке пумпе
Упутство за употребу за подесиву перисталтичку пумпу Kamoer KCP-KK300-D, са детаљним описом њених карактеристика, спецификација, услова рада, описа интерфејса и мера предострожности.
Преview Kamoer KPHM100 Micro Peristaltic Pump Product Manual
Comprehensive product manual for the Kamoer KPHM100 micro peristaltic pump. Details features, specifications for brushed DC, brushless DC, and stepper motor variants, applications, pump tube information, and optional accessories. Includes model explanation and technical data.
Преview Упутство за употребу паметне перисталтичке пумпе Kamoer M1-STP
Овај приручник пружа детаљне информације о паметној перисталтичкој пумпи Kamoer M1-STP, укључујући њене карактеристике, спецификације, дефиниције модела, објашњења интерфејса и додатну опрему. Покрива карактеристике перформанси и типичне примене у лабораторијским и индустријским условима.