DWIN DMG80480T050_09W

DWIN 5.0 Inch HMI/TFT/LCD/IPS Display Module

Model: DMG80480T050_09W

Марка: DWIN

1. Увод

This manual provides detailed instructions for the DWIN 5.0 Inch HMI/TFT/LCD/IPS Display Module, Model DMG80480T050_09W. This industrial-grade display is designed for human-machine interface applications, featuring a T5L ASIC and running the DGUS II system. It offers a wide viewing angle, high brightness, and various touch options to suit diverse industrial and consumer needs.

2. Карактеристике

  • Based on T5L0, running DGUS II system, industrial grade.
  • 5-inch, 800*480 Pixels resolution, 262K Colors, IPS-TFT-LCD, wide viewугао уласка.
  • High brightness (WTC: 800nit, WTR: 750nit, WN: 900nit).
  • Available with Capacitive touch (CTP), Resistive touch (RTP), or No Touch (No TP) options.
  • Equipped with RTC (Real-Time Clock) and Buzzer support.
  • Supports TTL/RS232 serial interfaces (UART2/UART4).
  • Integrated 16MB Flash Memory.
  • Conformal coating for enhanced durability.
  • Reserved WiFi and USB Module Interface for networking and configuration file ажурирања.
Key features of DWIN display module
Готовоview of key features including touch options, brightness, memory, and operating temperature.

3. Увод у хардвер

The DWIN display module integrates an LCD with a powerful CPU (T5L ASIC) and various interfaces for versatile applications.

Hardware Introduction Diagram
Detailed diagram of the display module's hardware components.

Кључне компоненте:

  • T5L ASIC: DWIN's self-developed HMI IC, featuring dual-core 8051 chips, 22x I/O, 1x CAN, 4x UART, 8x A/D, 2x PWM.
  • РТЦ: Real-Time Clock for timekeeping functions.
  • Фласх меморија: 16MB for program and data storage.
  • Интерфејс СД картице: For external storage and program updates.
  • Зујалица: For audible feedback.
  • TP Interface: Touch Panel interface (Capacitive, Resistive, or None).
  • LCM Interface: Liquid Crystal Module interface.
  • Кориснички интерфејс: General purpose interface for external connections.
  • PGT05 Interface: Programming interface.
  • Reserved USB/Wi-Fi Module Interface: For future expansion and connectivity.
Integrated LCD with CPU and interfaces
Diagram showing the integrated LCD with CPU and various interfaces.

4. Додатна опрема за производе

The following accessories are typically included with your DWIN display module:

Додатна опрема за производе
Image showing the standard product accessories.
  • HDL65011: Interface cable.
  • HDL65013: Interface cable.
  • 8Pin_2.0mm: Цоннецтор.
  • СД001: СД картица.

5. Setup and Development

To begin using your DWIN LCD Module, it is crucial to first update the program to the LCD before physical assembly. The development process involves several steps using DWIN's dedicated tools.

5.1. UI Development Steps

Smart UI development platform steps
Visual representation of the UI development workflow.
  1. Plan UI Prototype Layout and Logic: Define the user interface design and operational flow.
  2. Design UI Interface Images: Create the visual assets for your interface.
  3. Configure in PC Tools: Use DWIN's PC-based development tools to integrate images and define functionality.
  4. Преview Ефекат: Test and verify the UI design and logic within the development environment.
  5. Generate DGUS Project File and Download: Create the final project file and download it to the smart screen module.

5.2. Initial Program Update

Before assembling the LCD module into your machine, you must update the program to the LCD. This ensures proper functionality and compatibility with your application.

  1. Check Software Platform: Refer to the datasheet to identify the specific software platform for your screen.
  2. Use Correct SDK: Utilize the appropriate development SDK for your platform to complete the development process.
  3. Update and Test: Download the developed software program to the LCD and perform thorough testing.
  4. саставити: Once testing is successful, you can proceed with assembling the module into your machine.

6. Принципи рада

The DWIN display module operates on the DGUS II system, providing a rich set of UI functionalities with zero-code development for many common tasks. This allows for intuitive interaction and display management.

6.1. Touch Functions

The module supports various touch interactions, depending on the chosen touch panel type (Capacitive, Resistive, or No Touch).

  • Variables input
  • Попуп мени
  • Increment adjustment
  • Drag adjustment
  • Basic touch module
  • Return key code
  • ASC II text input
  • GBK input
  • Synchrodata return
  • Подешавање ротације
  • Page sliding

6.2. Функције приказа

The DGUS II system enables a wide range of display capabilities:

  • VAR Icon display
  • Animation icon
  • Slide display
  • Artistic variables
  • Picture animation display
  • Icon rotating
  • Data window display
  • Dynamic curve
  • Контрола осветљења
  • Text scroll
  • HEX data display
  • Icon overlay
  • Bit Icon
  • Data variable display
  • Приказ текста
  • Basic graphic elements
  • Контрола камере
  • Batch variable icon management
  • Roll character display
  • DGUS II text rendering
  • Видео репродукција
Touch and Display Functionality
Готовоview of touch and display functions supported by the DGUS II system.

7. Спецификације

Detailed technical specifications for the DMG80480T050_09W display module are provided below.

DMG80480T050_09W Specifications
Категорија параметраПараметарВалуе
Дисплаи ПараметерсЛЦД типИПС, ТФТ ЛЦД
Viewинг АнглеШироко viewing angle, 85°/85°/85°/85° (L/R/U/D)
Резолуција800×480 pixels (support 0°/90°/180°/270°)
Боја18-bit 6R6G6B (262K Colors)
активна област (АА)108.0 мм (Ш)×64.8 мм (В)
Режим позадинског осветљењаЛЕД
ОсветљеностWTC: 800nit, WTR: 750nit, WN: 900nit
Параметри серијског интерфејсаРежимUART2: TTL/CMOS; UART4: TTL/CMOS (Only after OS configuration)
Бауд Рате3150~3225600bps, typical value of 115200bps
Интерфаце Цабле8Пин_2.0мм
Електричне спецификацијеНазивна снага<10В
Оператинг Волtage9~36В, типична вредност од 12В
Препоручено напајање12В 1А ДЦ
Оперативно окружењеРадна температура-20℃~70℃ (12В при 60% РХ)
Температура складиштења-30℃~80℃
Анти-УВДа
Конформни премазДа
Радна влажност10%~90%РХ, типична вредност од 60% РХ
Физичке димензијеForm Factor (W×H×T)WTC: 143.4mm × 80.8mm × 15.8mm
WTR: 143.4mm × 80.8mm × 15.4mm
WN: 143.4mm × 80.8mm × 13.8mm
Монтажне димензијеPositioning hole: 121.8(+0.3mm)×76.9(+0.3mm)
Нето тежинаWTC: 160g, WTR: 145g, WN: 135g
Табела детаљних спецификација
Comprehensive table of display, serial, electrical, and environmental specifications.
Mechanical Dimensions Drawing
Technical drawing illustrating the mechanical dimensions of the DMG80480T050_09WTC variant.

8. Одржавање

To ensure the longevity and optimal performance of your DWIN display module, follow these maintenance guidelines:

  • Чишћење: Use a soft, lint-free cloth to gently clean the display surface. Avoid abrasive materials or harsh chemicals that could damage the screen or conformal coating.
  • Услови животне средине: Operate and store the module within the specified temperature and humidity ranges (-20℃~70℃ operating, -30℃~80℃ storage; 10%~90%RH operating humidity). Avoid direct exposure to extreme temperatures or rapid temperature changes.
  • Руковање: Handle the module with care to prevent physical damage. Avoid applying excessive force to the screen or connectors.
  • Напајање: Always use the recommended 12V 1A DC power supply to prevent electrical damage.

КСНУМКС. Решавање проблема

Овај одељак се бави уобичајеним проблемима и њиховим могућим решењима.

9.1. Општа питања

  • Screen not displaying or behaving abnormally (dead, black, white, splash, reboot): The product undergoes rigorous Electrostatic Discharge (ESD) and Electrical Fast Transient (EFT) tests to ensure normal operation under typical conditions. If such issues occur, verify power supply stability and proper connections. Re-uploading the program may also resolve software-related glitches.
  • Difficulty in initial setup/program loading: Ensure you have followed the UI development steps and initial program update procedure correctly. The program must be updated to the LCD using the correct SDK before physical assembly.

10. Савети корисника

  • Pre-Assembly Programming: Always update your custom program to the LCD module and test it thoroughly before integrating the module into your final product or machine. This prevents potential issues and simplifies debugging.
  • Development Resources: DWIN provides extensive online resources, including developer forums, video tutorials, and development guides. Utilize these resources for efficient development and troubleshooting.

11. Technical Support and Contact

For product inquiries, after-sales service, and technical support, DWIN offers several channels:

Contact Us for Technical Support
Information on how to contact DWIN for technical support.

12. Quality Assurance and Testing

DWIN products undergo stringent quality control and testing procedures to ensure reliability and performance.

Тестови осигурања квалитета
Готовоview of various quality assurance tests performed on the display modules.
  • ЕМИ тест: Electromagnetic Interference testing.
  • ESD Test: Electrostatic Discharge testing (Contact discharge ±6KV, Air discharge ±8KV).
  • IQC Test: Incoming Quality Control.
  • Low & High Temp. Test: Environmental temperature testing.
  • TP Bending Test: Touch Panel durability testing.
  • UV Test: Ultraviolet radiation resistance testing.
  • Вибрациони тест: Mechanical vibration resistance testing.
  • Water Proof Test: Resistance to water ingress.
  • EFT Test: Electrical Fast Transient testing (Power supply ±2KV; 100KHz).

13. Пријаве

The DWIN 5.0 Inch HMI display module is suitable for a wide range of applications across various industries due to its industrial-grade design and versatile features.

Типичне апликације
Визуелни ексamples of industries where the DWIN HMI display is applied.
  • Паметне куће: Control panels for home automation systems.
  • Индустријски: Human-machine interfaces for machinery, control systems, and automation equipment.
  • медицински: Display interfaces for medical devices and equipment.
  • превоз: Instrument panels for vehicles (cars, ships) and public transport information displays.
  • банкарство: Interfaces for ATMs and other financial terminals.
  • Оутдоор: Displays for outdoor kiosks, signage, and equipment.
  • POS Payment: Point-of-sale terminals and payment systems.
  • Остале апликације: Beauty machines, Physical therapy, Health and fitness, Air treatment, Air control, Electricity, Water treatment, IC design and manufacture, Kitchen appliances (Juicer, oven, ice machine, ice-cream machine, kitchen ventilator), New energy (Photovoltaic, Wind electricity, Charging Pile), Household appliances.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.