Увод
The XTUGA SF-1 is a professional UHF wireless audio transmitter and receiver system designed to convert wired microphones into wireless units. It supports both dynamic and condenser microphones with adjustable voltage modes (0V, 5V, 48V phantom power). Featuring 16 selectable frequencies, low latency, and a long working distance, the SF-1 is ideal for stage performances, recording, and various audio applications.
Садржај пакета
Молимо вас да означите поље за следеће ставке:
- 1 x XTUGA SF-1 Transmitter
- 1 x XTUGA SF-1 Receiver
- 1 x XLR Female to 6.35mm Male Plug Converter
- 1 x 6.35mm Female to XLR Male Plug Converter
- 2 к УСБ кабла за пуњење
- 1 к Упутство за употребу
Производ је завршенview
Familiarize yourself with the components and controls of the XTUGA SF-1 system:
- Transmitter XLR Adapter: Connects to your microphone.
- Приказ: Shows frequency, volume, and battery status.
- Дугме CH (канал): Short press to adjust frequency.
- Power Charging Port (Transmitter): УСБ-Ц порт за пуњење.
- VOL (Volume) Button: Short press to adjust volume (5 levels). Long press to switch power supply mode (0V, 5V, 48V).
- Power Button (Transmitter): Дуго притисните да укључите/искључите.
- Receiver XLR Adapter: Connects to your mixing console or audio device.
- CHR (Charging) Light: Indicates charging status (red when charging).
- Power Charging Port (Receiver): УСБ-Ц порт за пуњење.
- RF (Radio Frequency) Light: Означава статус РФ сигнала.
- AF (Audio Frequency) Light: Blinks with received audio signal.
- Power Button (Receiver): Дуго притисните да укључите/искључите.
- Electric Display Light: Индикатор нивоа батерије.
Спецификације
Technical parameters of the XTUGA SF-1 Wireless Converter:
| Феатуре | Спецификација |
|---|---|
| Фреквенцијски опсег | 572-596 МХз |
| Прилагодљиви канали | 16 фреквентних тачака |
| Цханнел Спацинг | 1.6 МХз |
| Метода модулације | ДКПСК |
| Стабилност фреквенције | ±3 ППМ |
| Фреквенцијски одзив | 40Hz - 20kHz |
| Трајање употребе | До 6 сати |
| Трансмиссион Дистанце | 50-80 meters (line of sight) |
| Уграђена батерија | Да |
| Комуникација | Бежични |
| Сет Типе | Transmitter Sets |
| Трансдуцер | Динамиц Мицропхоне |
| Користите | StagБежични микрофон е Performance |
| Стиле | Хандхелд Мицропхоне |
| Полар Паттернс | Кардиоид |
| дијафрагма | S-Мол |
| Мицропхоне Цонвертер | Конвертер ожиченог у бежични |
Водич за подешавање
Follow these steps to set up your XTUGA SF-1 wireless system:
- Напуните јединице: Connect both the transmitter and receiver to a USB power source using the provided charging cables. The CHR light on the receiver will turn red while charging. Once fully charged, the light will turn off or change color (refer to the display for battery level).
- Connect Transmitter to Microphone: Plug the XTUGA SF-1 Transmitter directly into the XLR output of your wired microphone.
- Connect Receiver to Audio Input: Plug the XTUGA SF-1 Receiver into an available XLR input on your mixing console, recorder, speaker, or other audio equipment.
- Using Converters (Optional): If your audio equipment uses 6.35mm (1/4 inch) inputs instead of XLR, use the provided XLR to 6.35mm converter to connect the receiver. Similarly, if your microphone has a 6.35mm output, use the 6.35mm to XLR converter to connect it to the transmitter.
Упутство за употребу
- Укључивање/искључивање: Long press the 'POWER' button on both the transmitter and receiver to turn them on or off.
- Усклађивање фреквенције: The units should automatically pair. After successful RF light matching, the RF light on the receiver will turn red. The AF light on the receiver will blink when it receives a sound signal from the transmitter.
- Учесталост пребацивања: On the transmitter, short press the 'CH' (Channel) button to cycle through the 16 available frequencies. This helps avoid interference.
- Подешавање јачине звука: On the transmitter, short press the 'VOL' (Volume) button to adjust the output volume in 5 levels.
- Switching Power Supply Mode (for Microphones):
The SF-1 offers three voltage adjustment modes to accommodate different microphone types. Press and hold the 'VOL' button on the transmitter for 5 seconds to switch between modes:- 0V (Dynamic Mic Mode): For standard dynamic microphones.
- 5V (Audio Mode): For condenser microphones or recording microphones that require 5V power.
- 48V (Condenser Mic Mode): For phantom-powered condenser microphones.
Note: Please confirm your microphone type before use and select the corresponding mode to prevent damage to your microphone or the device.
Three power supply modes for dynamic, 5V condenser, and 48V phantom-powered condenser microphones.
Кориснички савети
- Фреквенцијски опсег: The operating frequency range is 572 to 596 MHz. If you experience interference, try switching to a different channel using the 'CH' button.
- Више јединица: The system supports up to 16 adjustable frequency points, allowing multiple groups to be used simultaneously without interfering with each other. Ensure each pair (transmitter/receiver) is set to a unique channel.
- Трајање батерије: The built-in battery provides approximately 6 hours of usage. Keep the units charged for uninterrupted performance.
- Компатибилност микрофона: Always verify your microphone's power requirements (dynamic, 5V condenser, or 48V phantom) and select the correct power supply mode on the transmitter to ensure proper operation and prevent damage.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Нема излаза звука | Units not powered on, low battery, incorrect connections, frequency mismatch, incorrect microphone mode. | Ensure both units are powered on and charged. Check all cable connections. Verify transmitter and receiver are on the same frequency. Confirm correct power supply mode for your microphone. |
| Interference or static noise | Other wireless devices, obstacles, or being too far from the receiver. | Change the frequency channel on the transmitter. Ensure a clear line of sight between transmitter and receiver. Reduce distance between units. Turn off other interfering wireless devices. |
| Кратак домет преноса | Obstacles blocking signal, excessive distance. | Ensure a clear line of sight. Avoid placing units behind large metal objects or walls. Reduce the distance between the transmitter and receiver. |
| AF light not blinking with sound | No audio input to transmitter, transmitter not paired, microphone issue. | Check microphone connection and functionality. Ensure transmitter is powered on and paired with the receiver. |
| Батерија се брзо празни | Aging battery, continuous high power usage. | Ensure units are fully charged before use. If battery life significantly degrades, contact support. (Note: Batteries are built-in and not user-replaceable.) |
Одржавање
- Чишћење: Use a soft, dry cloth to clean the surface of the transmitter and receiver. Do not use liquid cleaners or solvents.
- Складиштење: Уређај чувајте на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.
- Одржавање батерије: For optimal battery life, avoid fully discharging the units frequently. Recharge them regularly, even if not in use for extended periods.
- Руковање: Пажљиво рукујте јединицама како бисте спречили физичка оштећења. Избегавајте испуштање или излагање јаким ударцима.
Гаранција и подршка
XTUGA products are manufactured to high quality standards. For any technical issues, warranty claims, or support inquiries, please contact the seller or XTUGA customer service. Keep your purchase receipt as proof of purchase.