Упутство за употребу контролера електричног тротинета Kugoo ES2 Microgo M5

1. Увод

This manual provides essential information for the installation, operation, and maintenance of your Kugoo ES2 Microgo M5 Electric Scooter Controller. This controller is designed to manage the motor functions of compatible electric scooters, ensuring optimal performance and a maximum speed of 30 km/h. Please read this manual thoroughly before attempting any installation or use.

2. Безбедносне информације

• Always disconnect the scooter's power source (battery) before installing or replacing the controller.
• Ensure all connections are secure and correctly matched to prevent electrical damage.
• Ако нисте сигурни у вези са било којим кораком, потражите стручну помоћ.
• Keep the controller dry and away from extreme temperatures.

3. Инсталација и подешавање

The controller is an internal component of the electric scooter. Installation typically involves replacing an existing controller. Refer to your scooter's specific service manual for exact location and removal procedures. The following images illustrate the controller and its various wire connectors.

Figure 3.1: Kugoo ES2/M5 Electric Scooter Controller with various wire connectors. Note the different colored wires and connector types for various scooter functions.

Слика 3.2: Крупни план view of the controller, showing the product label with specifications and the arrangement of wire harnesses.

Слика 3.3: Прample of a compatible electric scooter (Kugoo ES2 or Microgo M5) for which this controller is designed.

Цоннецтион Оверview:

The controller features multiple wire harnesses, each designed for a specific connection:

• Жице мотора: Typically thicker wires (often three phases) connecting directly to the scooter's motor.
• Жице батерије: Thicker red and black wires for power input from the battery.
• Жице Холовог сензора: Smaller wires (usually five) for motor position sensing.
• Throttle/Accelerator Wires: Connect to the handlebar throttle for speed control.
• Brake Wires: Connect to the brake levers for motor cut-off during braking.
• Display/Dashboard Wires: For communication with the scooter's display unit.
• Светлосне жице: For connecting headlights or taillights (if applicable).

Ensure each connector is securely plugged into its corresponding port. Incorrect wiring can lead to malfunction or damage.

4. Упутство за употребу

Once the controller is correctly installed and the scooter's battery is connected, the controller will manage the scooter's electrical functions. Operation is performed via the scooter's standard controls (throttle, brakes, display).

• Укључивање/искључивање: Use the scooter's main power button to activate or deactivate the system.
• Контрола брзине: The controller regulates motor speed based on throttle input. This controller supports a maximum speed of 30 km/h.
• кочење: When brakes are applied, the controller cuts power to the motor and may activate regenerative braking (if supported by the scooter model).
• Display Feedback: The controller sends data to the scooter's display, showing speed, battery level, and other relevant information.

Figure 4.1: Scooter handlebar showing the display and controls that interact with the installed controller.

5. Одржавање

The electric scooter controller is a robust electronic component, but proper care ensures its longevity:

• Одржавајте суво: Protect the controller from water and excessive moisture. While some scooters have water resistance, direct exposure can cause damage.
• Чисте везе: Periodically check and clean electrical connections to ensure good contact and prevent corrosion.
• Избегавајте физичка оштећења: Protect the controller from impacts or vibrations that could damage internal components.
• температура: Operate the scooter within recommended temperature ranges to prevent overheating of the controller.

КСНУМКС. Решавање проблема

If you experience issues with your scooter after controller installation, consider the following common troubleshooting steps:

If problems persist after basic troubleshooting, contact customer support.

7. Спецификације

8. Савети корисника

• Професионална инсталација: If you lack experience with scooter electronics, consider having the controller installed by a qualified technician to avoid damage.
• Чврсте везе: Always double-check that all connectors are fully seated and locked into place. Loose connections are a common cause of intermittent issues.
• Управљање кабловима: After installation, ensure all cables are neatly routed and secured to prevent them from being pinched or damaged during scooter operation.

9. Подршка

For technical assistance or further inquiries, please contact our support team:

• Whatsapp/WeChat: +86 19350856924
• Емаил: zlinshow001@163.com

Please have your product details ready when contacting support.