1. Увод
This manual provides detailed instructions for the MJJC 4 Zone Dimming V1 LED Dimmer and RS1 Wireless Remote Control system. This system is designed for controlling single color LED strips, offering smooth dimming and multi-zone control capabilities. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.
Image 1: MJJC V1 LED Dimmer and RS1 Wireless Remote Control Kit
2. Карактеристике
V1 LED Dimmer
- Used to control single color LED strips.
- Offers 4096 levels of 0-100% smooth dimming without visible steps.
- Can connect with an external push switch for on/off and dimming functions.
- Adjustable light on/off fade time (3 seconds selectable).
- Includes over-heat, over-load, and short circuit protection with automatic recovery.
RS1 2.4G RF Remote Control
- 4-zone dimming remote control for independent or synchronized control.
- Features 13 keys and a touch color wheel for smooth dimming adjustments.
- Utilizes 2.4G RF control for reliable wireless communication.
- Comes with a remote holder for convenient storage.
3. Спецификације
Image 2: Specifications for V1 LED Dimmer
| Категорија | Параметар | Валуе |
|---|---|---|
| Улаз и излаз | Улазни волtage | 5-36ВДЦ |
| Инпут Цуррент | 8.5А | |
| Оутпут Волtage | 5-36ВДЦ | |
| Излазна струја | 1ЦХ, 8А | |
| Излазна снага | 40W/96W/192W/288W (for 5V/12V/24V/36V respectively) | |
| Оутпут Типе | Цонстант Волtage | |
| Dimming Data | Улазни сигнал | РФ 2.4 ГХз + Пусх Дим |
| Цонтрол Дистанце | 30м (простор без баријера) | |
| Затамњивање сиве скале | 4096 (2^12) нивоа | |
| Димминг Ранге | 0-100% | |
| Крива затамњења | Логаритамски | |
| ПВМ фреквенција | 2000Хз (подразумевано) | |
| Животна средина | Радна температура | Та: -30°Ц ~ +55°Ц |
| Температура кућишта (макс.) | Тц: +85°Ц | |
| ИП Ратинг | ИП20 | |
| Физички | V1 Dimmer Size | Д114 к Ш38 к В26мм |
| V1 Dimmer Gross Weight | 0.052 кг | |
| RS1 Remote Size | 155 мм к 43 мм к 17.5 мм |
Image 3: Dimensions of RS1 Remote Control and V1 LED Dimmer
4. Садржај пакета
The contents of your package depend on the specific kit selected at purchase. Please refer to the SKU image of your order for exact details. For exampле:
- Само В1: 1 piece V1 dimmer.
- RS1 and 1pcs V1 KIT: 1 piece RS1 remote and 1 piece V1 dimmer.
- RS1 and 2pcs V1 KIT: 1 piece RS1 remote and 2 pieces V1 dimmers.
- RS1 and 3pcs V1 KIT: 1 piece RS1 remote and 3 pieces V1 dimmers.
- RS1 and 4pcs V1 KIT: 1 piece RS1 remote and 4 pieces V1 dimmers.
Note: For shipping safety, batteries for the RS1 remote control are NOT included in the package. You will need 2x AAA batteries.
Image 4: A single V1 Dimmer unit. Multiple V1 dimmers can be controlled by one RS1 Remote and set into the same zone.
5. Инсталација
5.1 Дијаграм ожичења
The V1 LED Dimmer connects between your constant voltage power supply and the single color LED strip. An optional push switch can be wired to the V1 dimmer for local control.
Image 5: Basic Wiring Diagram for V1 LED Dimmer
Image 6: Detailed Push Switch Connection to V1 Dimmer
Image 7: Wiring Diagram for multiple V1 LED Dimmers controlled by one RS1 Remote and an optional Push Switch.
5.2 Мере предострожности приликом инсталације
- Слагање: Do not stack products. Maintain a distance of at least 20cm between units to ensure proper heat dissipation and extend product lifespan.
- Power Supply Proximity: Avoid installing the product close to switching power supplies. Maintain a minimum interval of 20cm to prevent radiation interference.
- Висина: Install the product at a height of 1 meter or more from the floor to prevent shortening the remote control distance due to weak reception signals.
- Метални предмети: Do not install products close to or cover them with metal objects. Maintain a minimum interval of 20cm to avoid signal attenuation and ensure optimal remote distance.
- Углови: Avoid installation at wall corners or beam corners, maintaining a minimum interval of 20cm to prevent signal interference.
6. Операција
6.1 V1 Dimmer Push Switch Control
When an external non-latching (momentary) wall switch is connected to the V1 dimmer:
- Кратки притисак: Turns the light ON or OFF.
- Дуги притисак (1-6 секунде): Press and hold to achieve stepless dimming. With every subsequent long press, the light level will dim in the opposite direction (e.g., brighter to dimmer, then dimmer to brighter).
- Затамњивање меморије: The light will return to its previously set dimming level when switched off and on again, even after a power failure.
6.2 Adjusting Light On/Off Fade Time
- Set Fade Time to 3 seconds: Long press the V1 dimmer's MATCH key for 5 seconds, then short press the MATCH key 3 times. The LED indicator will blink 3 times to confirm the setting.
- Restore Default Fade Time (0.5 seconds): Long press the V1 dimmer's MATCH key for 10 seconds to restore factory default parameters. The light on/off fade time will revert to 0.5 seconds.
6.3 RS1 Wireless Remote Control
Image 8: RS1 Remote Control demonstrating 4-zone control in a home environment.
Image 9: RS1 Remote Control with brightness ring for 0-100% adjustment.
Image 10: RS1 Remote Control button functions.
- 'All' Button: Turns on/off all 4 zone lights simultaneously.
- Touch Brightness Wheel: Touch and slide your finger along the wheel to smoothly adjust the brightness from 0-100%.
- Numbered Buttons (1, 2, 3, 4): Press to turn on the specific zone light.
- 'O' Buttons (next to 1, 2, 3, 4): Press to turn off the specific zone light.
- S1, S2, S3 Buttons: These are 3 scene memory buttons. You can save and recall preferred brightness levels for different zones.
6.4 Remote Control Indicator Light Operation
Image 11: RS1 Remote Control battery and indicator light details.
- Turning Light On: The indicator displays blue.
- Turning Light Off: The indicator displays red.
- Touching Color Wheel: The indicator displays the same color as the selected light.
- Invalid Operation (Light Off): If the light is off and you press a button or touch the wheel, the indicator displays red.
- Sleep State: To extend battery life, the touch wheel will enter a sleep state after a few seconds of no operation. Press any key to wake it up.
6.5 Matching Methods (V1 Dimmer to RS1 Remote)
To link a V1 dimmer to an RS1 remote control, use one of the following methods:
Image 12: Matching Methods for V1 Dimmer and RS1 Remote.
Method 1: Using the V1's Match Key
- Ensure the V1 dimmer is powered on.
- Short press the V1 dimmer's 'MATCH' key.
- Immediately press the desired zone key (1, 2, 3, or 4) on the RS1 remote control.
- The LED indicator on the V1 dimmer will flash rapidly a few times, indicating successful matching.
Method 2: Using Power Restart
- Ensure the V1 dimmer is connected to the LED strip and power supply.
- Switch off the power to the V1 dimmer (e.g., by flipping the circuit breaker or unplugging the power supply).
- Поново укључите напајање.
- Immediately short press the desired zone key (1, 2, 3, or 4) on the RS1 remote control three times.
- The light connected to the V1 dimmer will blink three times, indicating successful matching.
КСНУМКС. Решавање проблема
Image 13: Malfunctions Analysis & Troubleshooting Guide.
| Неисправност | Могући узроци | Решавање проблема |
|---|---|---|
| Нема светла | 1. Нема струје. 2. Wrong connection or insecure wiring. | 1. Проверите напајање. 2. Check all connections for security and correctness. |
| Uneven intensity between front and rear of LED strip, with voltagе дроп | 1. Излазни кабл је предугачак. 2. Пречник жице је премали. 3. Преоптерећење изван могућности напајања. 4. Преоптерећење изван могућности контролера. | 1. Reduce cable length or use loop supply. 2. Change to wider gauge wire. 3. Replace with a higher power supply. 4. Add a power repeater. |
| Нема одговора са даљинског | 1. Батерија нема напајање. 2. Изнад контролисане удаљености. 3. Контролер није одговарао даљинском. | 1. Replace the battery (2x AAA). 2. Reduce the distance between the remote and the dimmer. 3. Rematch the remote to the dimmer (refer to Section 6.5). |
8. Савети корисника
- When setting up multiple zones, ensure each V1 dimmer is matched to its intended zone on the RS1 remote to avoid cross-interference.
- For optimal wireless performance, try to keep the RS1 remote within the specified 30m barrier-free range and avoid significant metal obstructions.
- If experiencing flickering at very low dimming levels, ensure your LED strip and power supply are compatible with the dimmer's specifications and consider a power repeater if the load is high.
9. Гаранција и подршка
Овај производ долази са а 5 година гаранције од датума куповине, покривајући производне недостатке при нормалној употреби. Молимо вас да сачувате доказ о куповини за потребе гаранције.
The product is certified with CE и РоХС, ensuring compliance with European safety, health, and environmental protection standards.
For technical support or warranty inquiries, please contact your retailer or the manufacturer directly.
