100A MPPT AUTO Dual USB Wind Solar Hybrid Charge Controller User Manual

1. Увод

This manual provides detailed instructions for the installation, operation, and maintenance of your 100A MPPT AUTO Dual USB Wind Solar Hybrid Charge Controller. This advanced controller is designed to efficiently manage power from both wind turbines and solar panels to charge 12V, 24V, 36V, 48V, or 60V battery systems.

Featuring auto-focus MPPT tracking, a large LCD display, and comprehensive protection mechanisms, it ensures high charging efficiency and reliable performance for your off-grid power solutions.

2. Безбедносне информације

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in personal injury, damage to the controller, or damage to other components of your system.

• Ensure all connections are correct and secure before applying power. Incorrect wiring can cause damage.
• Always connect the battery to the controller FIRST, and disconnect it LAST.
• Do not short-circuit the boost output power port. This can severely damage the device.
• The controller is equipped with built-in overheating, overcurrent, short circuit, open circuit, and reverse connection protection. If a fault occurs, the controller will automatically recover once the fault is eliminated.
• Install the controller in a dry, well-ventilated area to ensure proper heat dissipation and protection from environmental elements.
• Keep the device away from water, flammable gases, and corrosive substances.
• Само квалификовано особље треба да обавља инсталацију и одржавање.

3. Карактеристике производа

• Хибридно пуњење: Manages power from both wind turbines and solar panels simultaneously.
• МППТ технологија: Auto-focus MPPT tracking for high charging efficiency, with non-stop detection during the charging process and two-way focus tracking. Supports input 15V to 40V boost MPPT for efficient charging.
• Виде Волtagе Компатибилност: Supports 12V, 24V, 36V, 48V, and 60V battery systems.
• ЛЦД екран: Large-screen LCD provides accurate real-time display of temperature, charging current, discharging current, and cumulative power generation.
• Подесиви параметри: User-adjustable charging and discharging parameters. Output power-off minute and hour can be adjusted for convenience.
• 3-Сtage Charge Management: Complete charge management system to optimize battery charging and extend its lifespan.
• Компатибилност батерија: Suitable for all types of lead-acid batteries (open, sealed, colloidal). Lithium batteries require user-defined parameters.
• Робусна заштита: Built-in overheating, overcurrent, short circuit, open circuit, and reverse connection protection. Automatic recovery after fault elimination.
• Ефикасан дизајн: Two-way MOS tube anti-backflow circuit, high-power charging mode with ultra-low heat generation. Phoenix wing aluminum alloy for excellent heat dissipation.
• Двоструки УСБ излаз: Provides 5V/2A Max USB output for charging external devices.
• Direct Load Power: Can supply power to the load without a battery, ideal for direct sunshine applications.

4. Спецификације

5. Подешавање и инсталација

Proper installation is crucial for the safe and efficient operation of your charge controller. Follow these steps carefully:

5.1 Монтажа контролера

• Choose a dry, well-ventilated location, protected from direct sunlight, high temperatures, and moisture.
• Ensure there is sufficient space around the controller for air circulation, especially around the heat sink fins.
• Mount the controller vertically on a non-flammable surface using appropriate screws through the mounting holes. Refer to Figure 2 for dimensions and Figure 3 for mounting points.

5.2 Ожичење

WARNING: Ensure all power sources (solar, wind, battery) are disconnected before making any wiring connections to prevent electric shock or damage to the equipment.

The controller features clearly labeled terminals for connecting your wind turbine, solar panels, battery bank, and DC load. Refer to Figure 4 and Figure 5 for terminal identification.

1. Повежите батерију: Connect the positive and negative terminals of your battery bank to the corresponding battery terminals on the controller. Ensure correct polarity. The controller will automatically detect the battery voltage.
2. Повежите соларне панеле: Connect the positive and negative leads from your solar panel array to the solar input terminals on the controller. Ensure the solar panel voltage is approximately 1.5 times the battery voltagе за оптимално пуњење.
3. Connect the Wind Turbine: Connect the output leads from your wind turbine to the wind input terminals on the controller.
4. Повежите једносмерно оптерећење: Connect your DC loads (e.g., lights, small appliances) to the load output terminals on the controller. Ensure the total current draw of your loads does not exceed the rated discharge current of 30A.
5. УСБ излаз: The dual USB ports provide 5V/2A Max output for charging compatible devices.

6. Упутство за употребу

The controller features an intuitive LCD display and control buttons for monitoring and adjusting system parameters.

6.1 LCD Display and Buttons

The large-screen LCD displays real-time information such as battery voltage, charging current, discharging current, temperature, and cumulative power generation. The control buttons (SET, +, -) allow for navigation and parameter adjustment.

6.2 Подешавање параметара

• Press the "SET" button to cycle through different display screens and enter parameter adjustment mode.
• Use the "+" and "-" buttons to increase or decrease values when in adjustment mode.
• The controller allows adjustment of charging and discharging parameters. For lithium batteries, these parameters must be user-defined according to the battery manufacturer's specifications.
• The output power-off time can be adjusted in minutes and hours, providing precise control over load operation.

6.3 Процес пуњења

The controller employs a complete 3-stage charge management system to optimize battery charging and extend its lifespan. It utilizes auto-focus MPPT tracking to maximize energy harvest from both solar and wind sources.

7. Одржавање

Regular maintenance helps ensure the longevity and optimal performance of your charge controller.

• Чишћење: Periodically clean the controller's exterior with a dry cloth to remove dust and debris. Ensure the heat sink fins (Figure 6) are free from obstructions to maintain efficient cooling.
• Провере везе: Annually inspect all wiring connections for tightness and corrosion. Loose or corroded connections can lead to power loss or overheating.
• вентилација: Ensure the installation area remains well-ventilated and free from objects that could block airflow to the controller.
• Услови животне средине: Verify that the operating environment remains within the specified temperature range (-10°C to +60°C).

КСНУМКС. Решавање проблема

The controller is designed with robust self-protection features. If you encounter issues, consider the following:

• Нема дисплеја/Нема напајања: Check battery connections and ensure the battery has sufficient charge. The controller requires battery power to operate its display.
• Без пуњења:
  • Verify solar panel and wind turbine connections.
  • Уверите се да соларни панел волtage is appropriate (approx. 1.5 times battery voltagи).
  • Check for sufficient sunlight or wind.
  • Confirm battery parameters are correctly set, especially for lithium batteries.
• Учитавање не ради:
  • Check load connections.
  • Проверите запремину батеријеtagе је изнад ниске волtage disconnect setting.
  • Ensure the load output is enabled and the power-off timer is not active.
  • Check if the total load current exceeds 30A.
• Protection Activated: The controller has built-in overheating, overcurrent, short circuit, open circuit, and reverse connection protection. If the controller stops functioning, identify and eliminate the fault (e.g., remove short circuit, reduce load, ensure proper ventilation). The controller will automatically recover once the fault is resolved.
• Unexpected Performance: Note that the actual operating current may not always reach the rated current, especially during prolonged operation, as the device prioritizes reliability and safety.

9. Савети корисника

• Системска интеграција: When integrating this controller into an existing power system, carefully verify voltage and current compatibility with all other components. For complex or critical installations, it is highly recommended to consult with a qualified solar/wind energy technician.
• Lithium Battery Settings: If you are using lithium batteries, it is crucial to manually configure the charging and discharging parameters on the controller to match the specific requirements and recommendations provided by your lithium battery manufacturer. Incorrect settings can damage the batteries.
• Solar Panel Sizing: For optimal charging efficiency, ensure your solar panel array's open-circuit voltage (Voc) is approximately 1.5 times the nominal voltage of your battery bank. This allows the MPPT function to operate effectively.
• Надгледање: Regularly check the LCD display for real-time data on charging, discharging, and cumulative power generation to understand your system's performance and identify any potential issues early.

10. Гаранција и подршка

For warranty information, please refer to the terms and conditions provided by your seller at the time of purchase. Keep your proof of purchase for any warranty claims.

For technical support or assistance with troubleshooting beyond the scope of this manual, please contact your point of purchase or the manufacturer's customer service.