1. Увод
The Twotrees TS1 Mini Laser Engraver is a compact and versatile device designed for personal and DIY engraving projects. It features a 3W laser, supports multiple connection methods (USB, Bluetooth), and is compatible with various materials like wood, paper, leather, and plastic. This manual provides essential information for safe and effective use of your TS1 engraver.
Figure 1: Twotrees TS1 Mini Laser Engraver and exampле апликације.
2. Безбедносне информације
WARNING: Class IV Laser Product. Avoid direct exposure to eyes. Always wear laser goggles during operation.
To ensure safe operation of your Twotrees TS1 Mini Laser Engraver, please observe the following safety guidelines:
- Always wear the provided laser goggles when the laser is active.
- Do not open the protective cover during engraving operations. Be careful of laser damage.
- Држите уређај даље од деце и кућних љубимаца.
- Operate the engraver in a well-ventilated area to dissipate fumes and odors from engraving.
- Ensure the engraver is placed on a stable, non-flammable surface.
- Never leave the engraver unattended during operation.
- Do not engrave highly reflective, transparent, or unknown materials without proper precautions and testing.
Figure 2: Safety features including protective cover, goggles, and exhaust port.
3. Садржај пакета
Проверите да ли су све ставке присутне у вашем пакету:
- TS1 Mini Laser Engraver unit
- Acrylic laser protective cover
- Ласерске наочаре
- УСБ кабл
- Адаптер за напајање
- Шрафцигер
- Test materials (e.g., wood, black plastic sheets)
- Упутство за употребу (штампана копија)
Слика 3: Укључена додатна опрема и компоненте.
4. Водич за подешавање
- Распакивање: Пажљиво уклоните све компоненте из паковања.
- Пласман: Place the engraver on a stable, level, and non-flammable surface in a well-ventilated area.
- Прикључак за напајање: Connect the power adapter to the engraver's power input, then plug it into a suitable electrical outlet.
- Computer/Mobile Connection:
- УСБ веза: Connect the engraver to your computer using the provided USB cable.
- Блуетоотх веза: Enable Bluetooth on your mobile device and pair it with the TS1 engraver.
- Офлајн операција: The device supports offline operation once engraving fileс су отпремљени.
- Инсталација софтвера: Install compatible software such as LightBurn or LaserGRBL for PC, or the MKSLaser mobile application.
- Подешавање фокуса: The laser head is adjustable for optimal focusing distance (2.5-6.5 cm). Rotate the laser head to achieve the sharpest, smallest laser dot on your material. This ensures precise engraving.
Figure 4: Multiple connection options for the TS1 engraver.
Figure 5: Adjustable laser focus mechanism and precision details.
Video 1: TS1 Mini Laser Engraver Setup and Engraving Demonstration.
5. Упутство за употребу
- Припрема материјала: Place the material to be engraved within the engraving area (80x80mm). The machine cavity can support objects up to 30mm in height. Ensure the material is stable and flat.
- Носите заштитне наочаре: Always wear the provided laser goggles before starting any engraving task.
- Софтверски интерфејс:
- Open your chosen software (LightBurn, LaserGRBL, or MKSLaser app).
- Import your design. Supported formats include JPG, PNG, BMP, G-code, Gif, SVG, NC, GC.
- Подесите параметре гравирања:
- Work Speed: Set the engraving speed (e.g., 800 mm/min).
- Снага ласера: Adjust the laser intensity (e.g., 230, range 0-1000).
- Величина: Define the dimensions of your engraving.
- Style Setting: Utilize options like 'Gray', 'Strong', 'Sketch' to adjust brightness, contrast, and other image processing settings for optimal results.
- Преview and Position: Use the software to preview the engraving path and adjust the material's position if necessary to ensure accurate placement.
- Започните гравирање: Once all parameters are set and the material is correctly positioned, initiate the engraving process from the software.
- Надгледање: Continuously monitor the engraving process. Do not open the protective cover during operation.
- Завршетак: After engraving is complete, safely remove the engraved item.
Figure 6: Mobile application interface for controlling the TS1 engraver.
6. Одржавање
- Чишћење ласерског сочива: Regularly clean the laser lens with a soft, lint-free cloth. Ensure the device is powered off and unplugged before cleaning.
- Cleaning the Engraving Area: Keep the engraving area free from dust and debris. Use a soft brush or compressed air to remove any residue.
- Издувни прикључак: Ensure the exhaust port is clear to maintain proper ventilation and prevent smoke buildup.
- Складиштење: When not in use, store the engraver in a dry, dust-free environment.
КСНУМКС. Решавање проблема
- Без ласерског излаза:
- Проверите да ли је адаптер за напајање безбедно повезан и да ли је уређај укључен.
- Verify that the USB or Bluetooth connection is active and stable.
- Ensure the laser power setting in your software is not set to zero.
- Confirm that the protective cover is properly closed, as some models have safety interlocks.
- Лош квалитет гравирања:
- Фокус: Adjust the laser focus by rotating the laser head until the laser dot on the material is as small and sharp as possible.
- Подешавања: Experiment with different laser power and speed settings for your specific material. Refer to online resources or material guides for recommended parameters.
- Материјал: Ensure the material is flat and securely placed to prevent movement during engraving.
- Проблеми са везом:
- УСБ: Try a different USB port or cable. Reinstall the device drivers if necessary.
- Блуетоотх: Ensure Bluetooth is enabled on both your device and the engraver. Try unpairing and re-pairing the devices.
- Софтвер не реагује:
- Restart the engraving software and the TS1 engraver.
- Check for any available software updates.
8. Спецификације
| Феатуре | Детаљ |
|---|---|
| Назив производа | TS1 Mini Laser Engraving Machine |
| Main Body Color | Сребрно сива |
| Материјал главног тела | Injection molding + aluminum |
| Димензије производа (Д к Ш к В) | 157 мм к 157 мм к 167 мм (6.22 ин к 6.22 ин к 6.69 ин) |
| Подручје гравирања | 80mm x 80mm x 35mm (machine cavity supports objects 0-30mm high) |
| Ласер Повер | 3W |
| Optimal Focusing Distance | 2.5-6.5 cm (adjustable laser head) |
| Compatible Engraving Materials | Plywood, density board, solid wood board, paper, painted metal, kraft paper, leather, plastic, bamboo |
| Нето тежина производа | Approx. 1025.7g (±100g) |
| Величина паковања | 203 мм к 210 мм к 196 мм |
| Повер Суппли | 12В/2А |
| Радна потрошња енергије | 17.5В |
| Блуетоотх | Подржано |
| ТФ Стораге | Supported (built-in) |
| УСБ порт | Подржано |
| Прецизност гравирања | 0.1мм |
| Максимална брзина гравирања | 3000мм/мин |
| Максимално убрзање | 320мм/мин |
| Компатибилни софтвер | LightBurn, LaserGRBL, MKSLaser (mobile phone APP) |
| Контролор | ГРБЛ |
| Смарт Девице | Да |
| Цертифицатион | CE |
| CNC or Not | ЦНЦ |
Figure 7: Product dimensions and engraving area.
9. Савети корисника
- Engraving LEGO Bricks: When engraving LEGO bricks, be aware that light-colored bricks may darken at the laser-engraved areas. For black bricks, the engraving effect may vary depending on the plastic's composition and laser settings. It is highly recommended to perform a test engraving on a spare or inconspicuous part of the LEGO brick using low power settings first to achieve desired results and avoid damage.
- Испитивање материјала: Always perform small test engravings on new materials or when using new settings to determine the optimal laser power and speed.
- вентилација: Even with the built-in fan, ensure good room ventilation, especially when engraving materials that produce strong fumes.
10. Гаранција и подршка
For warranty information, technical support, and service inquiries, please refer to the official TWO TREES website or contact your authorized retailer. Please retain your purchase receipt as proof of purchase for any warranty claims.
