SONOFF MINI-ZBRBS Zigbee паметни прекидач за ролетне - упутство за употребу

1. Увод

The SONOFF MINI-ZBRBS is a compact Zigbee smart curtain switch module designed to fit standard wall boxes. It allows you to easily upgrade a traditional motorized roller shutter into a smart curtain system. This module supports motors with up to 1A load and works with a Zigbee hub to enable app-based remote control, scheduled operation, and smart scene automation.

Additionally, the MINI-ZBRBS functions as a Zigbee signal repeater, helping to strengthen and stabilize your Zigbee network coverage. Its compact design and versatile features make it an ideal choice for smart Zigbee curtain control.

Note: A compatible SONOFF Zigbee hub is required for operation.

Image: SONOFF MINI-ZBRBS Smart Roller Shutter Switch.

2. Спецификације

The following table details the technical specifications of the MINI-ZBRBS module:

Image: Product dimensions (39.5x33x16.8mm) and key specifications.

3. Подешавање и инсталација

3.1 Мере предострожности

WARNING: Please install and maintain the device by a professional electrician. To avoid electric shock hazards, do not operate any connection or contact the terminal connector while the device is powered on!

Caution: For single-phase use only (100-240V~). Connecting to multiple phases may result in damage to the device.

To ensure the safety of your electrical installation, it's essential that either a Miniature Circuit Breaker (MCB) or a Residual Current operated Circuit-breaker with Integral Overcurrent protection (RCBO) with an electrical rating of 1A has been installed before the MINI-ZBRBS.

3.2 Упутства за ожичење

Ensure all wires are connected correctly before powering on. Refer to the diagrams below for proper wiring.

Ожичење тренутног прекидача:

Image: Wiring diagram for connecting a momentary switch to the MINI-ZBRBS module. Shows connections for N, L, Lout1, Lout2, S1, S2, and motor.

Ожичење тропозиционог прекидача:

Image: Wiring diagram for connecting a three-position rocker switch to the MINI-ZBRBS module. Shows connections for N, L, Lout1, Lout2, S1, S2, and motor.

*Уверите се да су све жице исправно повезане.

Motor Requirements:

The device supports general 4-wire AC motors and 5-wire AC motors (with zero wire, motor forward line, motor reverse line, and ground line).

3.3 Укључивање и упаривање

1. After wiring, power on the device. The LED signal indicator will "flash slowly", indicating it's in pairing mode.
2. If not paired within 3 minutes, the device will exit pairing mode. To re-enter, long press the button on the device for 5 seconds until the signal light "flashes slowly" and release.

Image: LED indicator status for pairing mode (slow flash).

3.4 Add Device to eWeLink App

1. Download the "eWeLink" App from Google Play Store or Apple App Store.
2. Open the eWeLink App and tap "Add Device".
3. Select your Zigbee gateway (e.g., ZBBridge-P).
4. Scan the QR code on the device or manually add it.
5. Wait for the device to be added successfully.

Image: Visual guide for adding the MINI-ZBRBS to the eWeLink app, including scanning QR code and pairing process.

3.5 Travel Calibration

Перценtage control requires travel calibration. Choose one of the following methods:

Method 1: Using eWeLink App

1. In the eWeLink App, a "Travel Calibration" pop-up window may appear. Alternatively, go to "Initial Settings" on the device settings page.
2. Perform "Automatic Calibration" or "Manual Calibration" by following the in-app instructions.
3. For automatic calibration, click "Start Now" and wait for completion.
4. For manual calibration, click "Manual", then "Next" to mark the "fully open" position, and "Done" to mark the "fully close" position.

Image: Screenshots illustrating the travel calibration process within the eWeLink app.

Method 2: Using Device Button

1. Press and hold the device button for more than 10 seconds until the LED indicator enters breathing mode.
2. Briefly press the device button to enter "Manual Calibration" mode.
3. Ручно потпуно отворите завесе, а затим кратко притисните дугме уређаја док ЛЕД индикатор не затрепери три пута.
4. Wait for the device to automatically close the curtains, then briefly press the device button again until the LED indicator flashes three times. This completes the "Manual Calibration".

*If there is any deviation in the calibration result, the calibration can be repeated until the desired accuracy is achieved.

*As the maximum one-way allowable continuous operation time for the motor in this device is 2 minutes, please pause the operation before the curtain reaches its limit position to avoid damaging the motor.

3.6 Install in Mounting Box

The MINI-ZBRBS is designed for complete installation into a flush-mounted box and enclosed with a cover plate or switch that fulfills national standard requirements. Ensure no part of the product is exposed after installation.

Image: Diagram showing the MINI-ZBRBS module installed within a wall mounting box, connected to an external switch.

*The depth of the mounting box should be at least 60 mm.

4. Операција

4.1 External Switch Control

The MINI-ZBRBS supports various external switch types, with the default factory setting being a rocker switch (Edge Mode).

• Преклопни прекидач: Toggle the "UP" and "DOWN" keys alternately more than 3 times within 6 seconds to control the curtain.
• Тренутни прекидач: Press the "UP" key more than 6 times within 6 seconds to control the curtain.

To switch the external switch type: Short-press the button on the device three times. The blue light will flash 3 times, indicating the switch type has been successfully switched. The sequence is: Edge Mode → Pulse Mode → Following Mode.

Image: Illustration of supported manual switch types: Momentary Switch, Double-Rocker Shutter Switch, and Three-Position Rocker Switch.

4.2 Даљинско управљање апликацијом

Once paired with the eWeLink app via a Zigbee hub, you can control your roller shutters remotely from your smartphone or tablet. This includes opening, closing, pausing, and setting specific percentagе нивоа.

Image: Screenshot of the eWeLink app showing precise percentage control for curtain positioning.

4.3 Паметна аутоматизација сцене

Create automated scenes within the eWeLink app. For example, you can set your blinds to close automatically at 6:00 PM or open at sunrise. With Zigbee local scenes, these automations can execute even when your internet connection is offline, ensuring reliable operation.

Слика: прample of a Zigbee local scene where blinds close at 6:00 PM, demonstrating automation even without internet.

4.4 Zigbee Signal Booster

The MINI-ZBRBS acts as a Zigbee router, extending the range and stability of your Zigbee mesh network. This is particularly useful in larger homes or areas with weak signal, ensuring all your Zigbee devices communicate effectively.

Image: Diagram illustrating how the MINI-ZBRBS acts as a Zigbee router to strengthen the mesh network, connecting various Zigbee end devices.

4.5 Third-Party Platform Integration

The MINI-ZBRBS can integrate with popular third-party smart home platforms like Home Assistant, allowing for centralized control and advanced automation scenarios within your existing smart home ecosystem.

Image: Screenshot showing the MINI-ZBRBS integrated into a Home Assistant interface, displaying device controls and settings.

4.6 Apple Home Integration via Matter Bridge

For Apple Home users, the MINI-ZBRBS can be integrated into your ecosystem via a Matter Bridge (e.g., eWeLink CUBE, ZBBridge-U, iHost, NSPanel Pro, or self-hosted software with a ZB Dongle). This enables seamless control of your curtains through Apple Home.

Image: Diagram illustrating two options for integrating SONOFF Zigbee devices, including MINI-ZBRBS, with Apple Home via a Matter Bridge.

5. Одржавање

5.1 Ресетовање на фабричка подешавања

To perform a factory reset, which will clear all settings and unpair the device, follow one of these methods:

• Притисните и држите дугме уређаја 5 секунди.
• Delete the device from the eWeLink app.

5.2 Preventing Motor Damage

The maximum one-way continuous operation time for the motor connected to this device is 2 minutes. To avoid damaging the motor, always pause the operation before the curtain reaches its limit position if it's operating for an extended period.

КСНУМКС. Решавање проблема

6.1 Статус ЛЕД индикатора

The blue LED indicator provides important status information:

• Наставља: Нормална веза са гејтвејем.
• Споро блиц: Device is in Pairing Mode.
• Брзи блиц: Ненормална веза са мрежним пролазом.
• Keeps off: Pairing failure/Timeout.
• Режим дисања (притисните и држите дугме 10 секунди): The device is in calibration.
• Трепери три пута: Тип прекидача је успешно промењен.

6.2 Roller Shutter Direction Test

After wiring, press the external switch to check if the roller shutter moves in the correct direction. If it does not, power off the device, swap the Lout1 and Lout2 wires, and test again.

6.3 Изјава о усклађености ФЦЦ-а

Овај уређај је у складу са делом 15 ФЦЦ правила. Рад је подложан следећа два услова: (1) Овај уређај не сме да изазове штетне сметње и (2) Овај уређај мора да прихвати све примљене сметње, укључујући сметње које могу изазвати нежељени рад.

Промене или модификације које нису изричито одобрене од стране стране одговорне за усклађеност могу поништити корисниково овлашћење за коришћење опреме.

This equipment has been tested and found to comply with the limits for a Class B digital device. It generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. If interference occurs, try the following:

• Преусмерите или преместите пријемну антену.
• Повећајте размак између опреме и пријемника.
• Повежите опрему у утичницу на струјном колу различитом од оног на који је прикључен пријемник.
• За помоћ се обратите продавцу или искусном радио/ТВ техничару.

Ову опрему треба инсталирати и користити на минималној удаљености од 20 цм између радијатора и вашег тела.

7. Савети корисника

• Ensure Zigbee Hub Compatibility: Always verify that your Zigbee hub is compatible with SONOFF devices for seamless integration and full functionality.
• Calibrate for Precision: Take the time to perform accurate travel calibration. This ensures your curtains stop exactly where you want them to, enhancing the user experience.
• Leverage Local Scenes: For critical automations, utilize Zigbee local scenes. This guarantees your routines run even if your internet connection is temporarily unavailable.
• Consider Signal Boosting: If you have a large home or many Zigbee devices, strategically placing MINI-ZBRBS modules can significantly improve your network's stability and range.
• Ручно замена: Remember that the module supports traditional wall switches, providing a convenient manual override option if needed.

8. Гаранција и подршка

8.1 ЕУ декларација о усклађености

The MINI-ZBRBS is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://sonoff.tech/compliance/

For CE frequency:

• Опсег радне фреквенције у ЕУ: Зигби: 2405-2480 МХз
• Излазна снага ЕУ: Zigbee ≤ 10dBm

8.2 WEEE Disposal and Recycling Information

All products bearing the WEEE symbol (Waste Electrical and Electronic Equipment, as in directive 2012/19/EU) should not be mixed with unsorted household waste. Please protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Contact local authorities for more information.

Image: WEEE disposal symbol.

8.3 Информације о произвођачу

Произвођач: Схензхен Сонофф Тецхнологиес Цо., Лтд.

Адреса: 3Ф & 6Ф, Блдг А, Но. 663, Булонг Рд, Шенжен, Гуангдонг, Кина

Поштански број: 518000

Webсајт: сонофф.тецх

Имејл услуге: суппорт@итеад.цц

Произведено у: континентална Кина

8.4 Додатни ресурси

A detailed user manual in PDF format is available for download. Please refer to the official product page or the eWeLink app for the latest version. (Reference: Упутство за употребу (ПДФ))