Увод
This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your YunlinLi T2 Stainless Steel Oil Press Machine. This versatile machine is designed for both cold and hot oil extraction from various seeds, including peanuts, sesame, and sunflower seeds, making it suitable for both home and small business use.
Мере предострожности
- Увек се уверите да је машина постављена на стабилну, равну површину.
- Држите руке и широку одећу даље од покретних делова током рада.
- Не користите машину мокрим рукама или у влажним условима.
- Уверите се да напајање одговара јачини звука машинеtagзахтеви (110V или 220V).
- Искључите машину из струје пре чишћења или одржавања.
- Чувати ван домашаја деце.
Производ је завршенview
The YunlinLi T2 Oil Press Machine features a robust stainless steel construction, a digital temperature control display, and a mechanical switch for operation. It is designed for efficient oil extraction from various oilseeds.
Подешавање и монтажа
- **Unpacking**: Carefully remove all components from the packaging. Check for any damage during transit.
- **Placement**: Place the machine on a sturdy, flat, and heat-resistant surface. Ensure adequate ventilation around the machine.
- **Assemble Hopper**: Attach the feeding hopper to the top of the main unit.
- **Install Pressing Rod**: Insert the pressing rod into the pressing chamber. Ensure it is securely in place.
- **Oil Collection**: Position the oil collection cup and residue collector under their respective outlets.
- **Power Connection**: Connect the power cord to the machine and then to a grounded electrical outlet. Verify that the voltage matches your machine's requirements (110V or 220V).
Упутство за употребу
The T2 model features adjustable temperature control, allowing for both cold and hot pressing methods.
- **Prepare Seeds**: Ensure seeds are clean, dry, and free from debris. For optimal results, some seeds may benefit from light roasting before hot pressing.
- **Power On**: Turn on the main power switch. The digital display will illuminate.
- **Set Temperature**:
- **Cold Pressing**: For delicate oils, set the temperature to the lower end of the range (e.g., 40-60°C) or as recommended for your specific seed.
- **Hot Pressing**: For higher oil yield and stronger flavor, set the temperature between 150-250°C, depending on the seed type (e.g., peanuts often benefit from higher temperatures). The T2 model allows adjustment from 40°C to 300°C.
- **Feed Seeds**: Once the desired temperature is reached, slowly feed the prepared seeds into the hopper. Do not overload the hopper.
- **Start Pressing**: Activate the pressing mechanism using the mechanical switch. The machine will begin to extract oil.
- **Collect Oil and Residue**: Oil will flow from the oil outlet into the collection cup, and the residue (cake) will be expelled from the residue outlet.
- **Monitor Operation**: Observe the oil flow and machine operation. If the machine struggles or oil flow stops, turn it off immediately and check for blockages.
- **Finish Pressing**: Once all seeds have been processed, allow the machine to run for a few minutes to clear any remaining material from the pressing chamber.
- **Power Off**: Turn off the mechanical switch, then the main power switch, and unplug the machine.
Одржавање и чишћење
Regular cleaning and maintenance will ensure the longevity and optimal performance of your oil press machine.
- **Cool Down**: Always allow the machine to cool completely before cleaning.
- **Disassemble**: Carefully disassemble the pressing chamber components (pressing rod, chamber, etc.).
- **Clean Components**: Wash all removable parts with warm, soapy water. Use a brush to remove any stubborn oil residue or seed particles. Rinse thoroughly.
- **Clean Main Unit**: Wipe down the exterior of the main unit with a damp тканина. Не урањајте главну јединицу у воду.
- **Dry Thoroughly**: Ensure all parts are completely dry before reassembling or storing to prevent rust.
- **Reassemble**: Reassemble the machine, ensuring all parts are correctly fitted.
- **Storage**: Store the machine in a dry, clean place away from direct sunlight and moisture.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Машина се не покреће | Није укључено; Искључено; Нестало напајањеtage. | Check power connection; Ensure switch is ON; Check household power. |
| Низак принос уља | Seeds too wet/dry; Incorrect temperature; Pressing rod worn; Seeds not preheated (for hot press). | Adjust seed moisture content; Increase temperature (for hot press); Inspect pressing rod; Preheat seeds if necessary. |
| Машина се зауставља током рада | Overload; Blockage in pressing chamber; Overheating. | Reduce seed feeding rate; Turn off, unplug, and clear blockage; Allow machine to cool down. |
| Прекомерна бука | Loose parts; Foreign object in chamber; Machine not on level surface. | Check for loose components; Turn off and inspect chamber; Ensure stable placement. |
Спецификације
| Феатуре | Детаљ |
|---|---|
| Бранд Наме | YunlinLi |
| Број модела | T2 |
| Материјал | нерђајући челик |
| Волtagе Опције | 110В, 220В |
| Температурни опсег | Подесиво од 40°C до 300°C |
| Тип контроле | Mechanical switch control with digital temperature display |
| Димензије (Д к Ш к В) | 50 цм к 22 цм к 28 цм |
| Тежина | 11.0 кг |
| Порекло | континентална Кина |
Кориснички савети
- For maximum oil yield, especially from harder seeds like peanuts, consider pre-roasting the seeds lightly before hot pressing.
- Experiment with different temperatures within the 40°C to 300°C range to find the optimal setting for various seed types and desired oil characteristics.
- Always filter the extracted oil through a fine mesh or cheesecloth to remove any small particles and improve clarity.
- Store freshly pressed oil in dark, airtight containers in a cool, dark place to preserve its freshness and extend shelf life.
- Clean the machine immediately after use to prevent oil residue from hardening, which can make cleaning more difficult and affect future performance.
Гаранција и подршка
The YunlinLi T2 Oil Press Machine is designed for durability and performance. In the event of any manufacturing defects or operational issues, please contact the seller or manufacturer for assistance.
Key service commitments include:
- Fast delivery with potential refunds for delays.
- Refunds for lost or damaged packages.
- Refunds if items damaged.
- Повраћај новца ако се испорука не изврши у року од 30 дана.
- Free returns within 90 days for eligible items.
For technical support or service inquiries, please refer to the contact information provided at the point of purchase.