1. Увод
Thank you for choosing the Aitek ANB-3312 1500VA Bivolt UPS. This device is designed to provide reliable power protection for your electronic equipment, safeguarding against power outages, surges, and fluctuations. Featuring high autonomy with two 12V/9AH batteries and a simulated sine wave output, it ensures stable and continuous operation for your critical devices. Please read this manual carefully before installation and operation to ensure optimal performance and safety.
2. Производ је готовview
2.1 Кључне карактеристике
- Капацитет: 1500VA for protection of multiple equipment and devices of higher consumption.
- Висока аутономија: Equipped with two 12V / 9AH batteries.
- Fast Transfer Time: Typical of 4-6 ms, ensuring seamless power transition.
- Излазни таласни облик: Simulated sine wave for compatibility with various devices.
- Низак ниво буке: Operates quietly, less than 40dB.
- Биволтна операција: Automatic Bivolt input (110V-220V) and Keyed Bivolt output (110V-220V).
- Stabilized Protection: Guards against overcharge, overload, and short-circuit.
2.2 Компоненте
Familiarize yourself with the main components of your Aitek ANB-3312 UPS:
Figure 1: Front Panel of the Aitek ANB-3312 UPS. Shows the digital display indicating input/output voltage, UPS status, power, and battery level, along with the power button and Aitek logo.
- Предњи панел: Features a digital display for real-time status monitoring (Input VAC, Output VAC, UPS status, Power, Battery level) and a power button.
- Задња плоча: Contains input power connection, output sockets, and a voltagе прекидач за избор.
- Вентилационе решетке: Located on the sides and rear for heat dissipation.
Figure 2: Rear Panel of the Aitek ANB-3312 UPS. Displays three output sockets, the AC input port, a fuse holder, and a crucial 110V/220V voltage selection switch for the output.
3. Подешавање
3.1 Распакивање и преглед
Carefully unpack the UPS and inspect it for any damage that may have occurred during transit. If any damage is found, do not operate the unit and contact your vendor.
3.2 Постављање
- Place the UPS in a well-ventilated area, away from direct sunlight, heat sources, and excessive dust or moisture.
- Ensure there is adequate space around the ventilation grilles for proper airflow.
- The ambient humidity should be between 0% and 90% RH (non-condensing) and temperature between 0°C and 40°C.
3.3 Повезивање УПС-а
- Улазно напајање: Connect the UPS to a standard wall outlet using the provided power cord. The UPS features Automatic Bivolt input (110V - 220V), automatically adapting to the input voltage.
- Оутпут Волtagе Избор: Before connecting any devices, locate the Bivolt Keyed switch on the rear panel (refer to Figure 2). Set this switch to either 110V or 220V according to the voltage requirements of the devices you intend to connect to the UPS output. Incorrect selection can damage your equipment.
- Опрема за повезивање: Plug your electronic devices (e.g., computer, monitor, router) into the output sockets on the rear panel of the UPS. Ensure the total load does not exceed the UPS's capacity (1500VA / 900W).
- Почетна наплата: For optimal battery performance, allow the UPS to charge for at least 8 hours before initial use, even if the battery indicator shows full. This ensures the internal batteries reach their full capacity.
4. Упутство за употребу
4.1 Укључивање/искључивање UPS-а
- Да бисте укључили: Press and hold the power button on the front panel for a few seconds until the display illuminates and the UPS beeps.
- Да искључите: Поново притисните и држите дугме за напајање неколико секунди док се екран не искључи.
4.2 Разумевање дигиталног дисплеја
The front digital display provides crucial information about the UPS status (refer to Figure 1):
- INPUT VAC: Shows the current incoming utility voltage.
- OUTPUT VAC: Приказује волtage being supplied to your connected devices.
- UPS Status: Indicates if the UPS is operating on utility power or battery power.
- СНАГА: May indicate the load percentage or power consumption.
- Индикатор нивоа батерије: Shows the approximate charge level of the internal batteries.
4.3 Режими рада
- Онлине режим: When utility power is present and stable, the UPS operates in online mode, providing conditioned power to your devices and charging its batteries.
- Режим батерије: У случају напајањаtagе или значајна запреминаtage fluctuation, the UPS automatically switches to battery mode, supplying power from its internal batteries. The transfer time is typically 4-6 ms. The UPS will emit an audible alarm in this mode.
- Пуњење батерије: The UPS will automatically charge its batteries when connected to utility power. It takes approximately 8 hours to recover 90% of the battery capacity.
5. Одржавање
5.1 Одржавање батерије
- To maximize battery lifespan, ensure the UPS is always connected to a power source to keep the batteries charged.
- Avoid frequent deep discharges. If the UPS operates on battery power, save your work and shut down your equipment properly as soon as possible.
- The UPS uses two 12V/9AH sealed lead-acid batteries. Battery replacement should be performed by qualified personnel.
5.2 Чишћење
- Ensure the UPS is turned off and disconnected from the wall outlet before cleaning.
- За чишћење спољне стране јединице користите меку, суву крпу.
- Немојте користити течна или аеросолна средства за чишћење.
- Keep the ventilation grilles clear of dust and obstructions to prevent overheating.
5.3 Складиштење
If storing the UPS for an extended period, ensure the batteries are fully charged. Recharge the batteries every three months to prevent permanent damage due to self-discharge.
КСНУМКС. Решавање проблема
This section addresses common issues you might encounter with your UPS. Refer to the digital display for diagnostic information.
| Проблем | Могући узрок | Решење |
|---|---|---|
| УПС се не укључује | No input power; Low battery; Power button not pressed correctly. | Check power cord connection and wall outlet. Allow UPS to charge for 8 hours. Press and hold power button firmly. |
| No output power to devices | UPS in battery mode with depleted battery; Overload; Output voltagпрекидач је неисправан. | Check battery level. Reduce connected load. Verify the 110V/220V output switch on the rear panel is set correctly for your devices. |
| UPS constantly beeping | Operating on battery power; Overload; Fault condition. | Check utility power. Reduce connected load. Consult display for error codes. |
| Батерија се не пуни | UPS not connected to utility power; Internal battery fault. | Ensure UPS is plugged in. If problem persists, contact support. |
7. Спецификације
| Феатуре | Спецификација |
|---|---|
| Капацитет | 1500ВА / 900В |
| Улазни волtagе Распон | 81-145 V AC or 145-275 V AC (Automatic Bivolt) |
| Инпут Фрекуенци | 60Hz or 50Hz (auto-detection) |
| Оутпут Волtagе Подешавање | ± 10% |
| Трансфер Тиме | Типично 4-6 мс |
| Wave-form | Симулирани синусни талас |
| Тип и количина батерије | 2 pcs of 12V / 9AH |
| Време пуњења | 8 hours for recovery of 90% capacity |
| Влажност | 0 to 90% RH from 0 to 40 °C (non-condensing) |
| Ниво буке | Мање од 40 дБ |
| Излаз | 110V - 220V (Bivolt Keyed) |
| Композиција | Metal, plastic, and electronic components |
| Тежина | 11.9 кг |
| Димензије (ДкШкВ) | 36.5 к 16.5 к 14 цм |
8. Савети корисника
- Управљање оптерећењем: To maximize battery runtime, connect only essential equipment to the UPS. Avoid connecting high-power devices like laser printers or heaters.
- Редовно тестирање: Periodically test your UPS by unplugging it from the wall to ensure it switches to battery mode correctly and provides adequate backup time.
- Волtagе Избор: Always double-check the output voltage selection switch on the rear panel before connecting new devices or moving the UPS to a different location with a different voltagе стандард.
9. Гаранција и подршка
За информације о гаранцији, техничку подршку или упите у вези са сервисирањем, обратите се месту где сте купили производ или овлашћеном сервисном центру произвођача. Сачувајте рачун као доказ о куповини.