Comfast CF-EW87 Outdoor Wireless AP User Manual

1. Увод

The Comfast CF-EW87 is a high-power outdoor Access Point (AP) designed for robust wireless connectivity in various outdoor environments. It features WiFi7 wireless transmission with dual-band speeds up to 3600Mbps, ensuring efficient and stable network performance. Equipped with three high-gain omnidirectional antennas, it provides 360° signal coverage. Its rigorous industrial casing is waterproof, lightning-proof, moisture-proof, and anti-freeze, making it suitable for squares, resorts, scenic spots, and other outdoor locations.

Кључне карактеристике:

• WiFi7 Technology: Latest wireless standard for enhanced fluency and performance.
• Велика брзина: Dual-band concurrent speeds up to 3600Mbps (2.4GHz: 688Mbps; 5.8GHz: 2882Mbps).
• Моћне перформансе: Tri-Core Engine (IPQ5312+QCN6412+QCA8337 chip solution) and Four External PAs for strong signal and efficient anti-interference.
• Опсежна покривеност: Detachable three high-gain 5dBi omnidirectional antennas provide 360° network coverage.
• Издржљив дизајн: IP66 protective industrial casing, waterproof, lightning-proof, moisture-proof, and anti-freeze.
• Флексибилна снага: Supports both POE (48V/0.32A) and DC (12V/1.5A) dual-mode power supply.
• Гигабитни портови: One 10/100/1000Mbps RJ45 WAN port and two 10/100/1000Mbps RJ45 LAN ports.
• Висок капацитет уређаја: Can simultaneously connect over 120 terminal devices.
• Intelligent Roaming: Ensures stable and uninterrupted network when devices move within coverage.

2. Садржај пакета

Молимо вас да проверите да ли су све ставке присутне у вашем пакету:

• 1 x Comfast CF-EW87 WIFI AP Unit
• КСНУМКС к Мрежни кабл
• 1 x POE Power Adapter
• 2 к Кабелске везице
• 2 x Waterproof Caps
• 1 x Set of Gaskets and Screws for Installation
• 1 к Упутство за инсталацију

3. Спецификације

4. Подешавање и инсталација

4.1 Физичка инсталација

The CF-EW87 supports both wall-mounted and pole-mounted installations, offering flexibility for various outdoor deployment scenarios.

Прикључак за напајање:

The device supports both Power over Ethernet (POE) and DC power supply. Choose the method most suitable for your installation environment.

4.2 Почетна конфигурација (Web Интерфејс)

Follow these steps to configure your CF-EW87 using the web interface. A detailed video guide is available below.

Video: CF-EW87 Wireless AP Install & Setup Guide, demonstrating pre-setup, AP, Bridge, Repeater, and Router mode configurations.

Pre-Setup Preparations:

1. Прикључите напајање: Connect the Ethernet cable to the LAN1 port of the device and the POE power supply. Connect the POE power supply to a power outlet. Wait for the signal light to turn on.
2. Повежите се са рачунаром: Connect your computer to the LAN port of the POE power supply using an Ethernet cable.
3. Приступ Web Интерфејс: Отвори а web browser on your computer and enter the default IP address 192.168.10.1 у траку за адресу.
4. Пријава: Enter the default password "admin" to log in to the device's configuration interface.

AP Mode Setup Steps:

1. From the main interface, select "Wizard".
2. Choose "AP" mode.
3. In AP mode, the AP requires an internal IP address that is not the same as the upper router's gateway. To manage the AP, the computer connected to it must have a manual IP in the same segment.
4. Set the wireless SSID, password, and advanced wireless parameters (channel bandwidth, country, channel).
5. Click "Next" and then "Finish" to apply settings.
6. Wait for the settings to take effect. After setup, connect the device's WAN port or the POE power supply's LAN port to the WAN.

Bridge Mode Setup Steps:

1. From the main interface, select "Wizard".
2. Choose "Bridge" mode.
3. The AP can set an internal segment (gateway IP should not match the upstream device's). This mode requires the upstream bridged device to enable WDS.
4. Click "Scan" at the SSID field to find the wireless SSID signal you need to bridge.
5. Enter the bridged wireless password (this is the upstream WiFi's password).
6. Configure the AP's own wireless SSID and password.
7. Click "Next" to complete the setup.
8. Wait for the settings to take effect.

Repeater Mode Setup Steps:

1. From the main interface, select "Wizard".
2. Choose "Repeater" mode.
3. The AP can set an internal segment (gateway IP should not match the upstream device's).
4. Click "Scan" at the SSID field to find the wireless SSID signal you need to relay.
5. Enter the relayed device's password.
6. Set the AP's own wireless SSID and password.
7. Click "Next" to complete the setup.
8. Wait for the settings to take effect.

Router Mode Setup Steps:

1. From the main interface, select "Wizard".
2. Choose "Router" mode.
3. Here offers three internet access methods: PPPOE, Static IP, or DHCP. Select the appropriate method based on your network configuration.
4. Click "Next" for LAN Port Settings.
5. You can set the wireless SSID, password, and advanced wireless parameters like channel bandwidth, country, and channel.
6. Wait for the configuration to complete and take effect.

5. Радни режими

The Comfast CF-EW87 supports multiple operating modes to adapt to various network requirements:

• Режим приступне тачке (AP): In this mode, the device acts as a central hub for wireless clients, extending an existing wired network wirelessly. It creates a new wireless network (SSID) for devices to connect to.
• Режим моста: This mode allows the device to connect two separate wired networks wirelessly. It requires the upstream device to have WDS (Wireless Distribution System) enabled.
• Режим понављача: The device extends the range of an existing wireless network by receiving and re-transmitting the signal. It uses the same SSID and password as the main network.
• Режим рутера: In this mode, the device functions as a router, providing internet access to connected devices. It supports PPPOE, Static IP, and DHCP internet access methods.

6. Одржавање

• Редовно чишћење: Periodically clean the exterior of the device to prevent dust and debris buildup, especially in outdoor environments. Use a soft, dry cloth.
• Ажурирања фирмвера: Проверите произвођача website for the latest firmware updates. Keeping the firmware updated ensures optimal performance, security, and access to new features.
• Заштита животне средине: Ensure the device is installed according to its IP66 rating, protecting it from water, dust, and extreme temperatures. Regularly inspect the waterproof caps and cable connections for any signs of wear or damage.
• Провера антене: Ensure the detachable antennas are securely fastened and free from obstruction.
• Циклус напајања: If you experience network issues, try power cycling the device (unplug and replug the power) to resolve temporary glitches.

КСНУМКС. Решавање проблема

Уобичајени проблеми и решења:

Нема напајања/Уређај се не укључује:

Ensure the power adapter (POE or DC) is correctly connected to the device and a working power outlet. Check the power indicator light on the device.

Не могу приступити Web Interface (192.168.10.1):

Verify your computer's Ethernet connection to the POE adapter's LAN port. Ensure your computer's IP address is in the same subnet as the device (e.g., manually set to 192.168.10.x, where x is not 1). Try a different browser or clear browser cache. Reset the device to factory defaults if necessary (refer to the manual for reset instructions).

Weak or Unstable WiFi Signal:

Check antenna connections and orientation. Ensure there are no major physical obstructions (walls, large metal objects) between the AP and client devices. Adjust the AP's position for optimal coverage. Verify wireless channel settings to avoid interference from other networks.

Мала брзина интернета:

Check the wired connection speed to the AP. Ensure the AP is connected to a high-speed internet source. Verify the operating mode is correctly configured for your network setup. Too many connected devices can also impact performance.

Уређај се често искључује:

Check for firmware updates. Ensure the power supply is stable. Review environmental factors that might affect stability (e.g., extreme temperatures, electrical interference).

8. Савети корисника

• MLO Functionality: The CF-EW87 supports WiFi7 with dual-band concurrent operation. While WiFi7 (802.11be) introduces Multi-Link Operation (MLO) for simultaneous use of multiple bands, specific MLO implementation details can vary. The dual-band concurrent feature already provides efficient anti-interference and stable signals across 2.4GHz and 5.8GHz. For advanced MLO features, ensure your client devices also support MLO and check for specific firmware updates from Comfast.
• Оптимално постављање: For outdoor use, consider placing the AP in a central location with a clear line of sight to the areas you want to cover. Avoid placing it near large metal structures or dense foliage that can obstruct signals.
• безбедност: Always change the default login password ("admin") for the web interface immediately after initial setup to prevent unauthorized access. Use strong, unique passwords for your WiFi networks.

9. Гаранција и подршка

This product comes with a standard manufacturer's warranty. For detailed warranty terms, technical support, or service inquiries, please refer to the official Comfast webсајт или контактирајте њихову корисничку службу. Сачувајте рачун као доказ о куповини за потребе гаранције.