1. Увод
This manual provides instructions for the Mini BFT Mitto Series 433.92Mhz Garage Door Remote Control. This wireless handheld rolling code transmitter offers stable and reliable control for various automation systems, including garage doors, gates, and other access control systems. Its compact design and wall-mounted installation options provide convenient control for residential, commercial, and industrial applications.
Figure 1: BFT 433MHz remote controls (2-button and 4-button models). Key features highlighted: Security 2.0, Remote Dominance, Control One Garage Door, Lightweight.
2. Основне карактеристике
- 433MHz Strong Signal: Ensures stable penetration through walls and obstacles for reliable operation.
- Напајање од 12V једносмерне струје: Low power consumption design for long-lasting and dependable performance.
- Дизајн на зиду: Offers flexible installation options for convenience.
- Компатибилност са више уређаја: Compatible with a variety of receiving systems.
- Чврста конструкција: Built with durable materials for extended lifespan.
- Лако упаривање: Simple and quick process to pair with compatible devices.
3. Компатибилност
The BFT Mitto Series remote control is compatible with the following BFT brand garage door and roller blind door remote control models:
- Mitto 2 / Mitto 4
- Mitto B RCB 02 / Mitto B RCB 04
- Kleio B RCA 02 / Kleio B RCA 04
- TRC1 / TRC2 / TRC4
- Mitto2M / Mitto4M
Figure 2: Compatibility diagram showing the BFT remote control with various compatible BFT remote models.
4. Подешавање и програмирање
Follow these instructions carefully to program your new remote control with your receiver system. There are two common programming types:
Figure 3: Programming instructions for Type 1 (physical buttons) and Type 2 (digital display) receivers.
Type 1 Programming (Physical Buttons)
- Отворите цasing of your receiver. It is located next to your motor.
- On the receiver circuit board, press the programming button (SW1). The LED light of the receiver blinks. Let the button go.
- Press both buttons on your new remote control at the same time. Let them go. The LED light of the receiver remains lit fixedly.
- Press the left button on your new remote control. Let it go. The LED light of the receiver blinks.
- Wait 5 seconds. The LED light of the receiver turns off.
- Repeat this procedure for the right button of your new remote control. This time, use the programming button SW2.
- Сачекајте 10 секунди.
- Your new remote control is programmed.
Type 2 Programming (Digital Display)
- Press the "OK" button on your receiver twice. The screen displays "PARA."
- Press the "-" button on your receiver twice. The screen displays "RADIO."
- Press the "OK" button on your receiver once. The screen displays "ADJ STRT."
- Press the "OK" button on your receiver once. The screen displays "Hidden Button."
- Press both buttons on your new remote control at the same time. Keep them pressed down. The screen displays "Released".
- Let the buttons go. The screen displays "Desired Button".
- Press a button on your new remote control. The screen displays "OK".
- Сачекајте 10 секунди.
- Your new remote control is programmed.
Video 1: Demonstration of the remote control programming process with a receiver board.
5. Упутство за употребу
Once programmed, your BFT Mitto remote control is ready for use. Simply press the corresponding button on the remote to activate the linked function (e.g., open/close garage door, gate, etc.). Ensure you are within the transmission range for optimal performance.
6. Одржавање
- Замена батерије: The remote control uses a 12V battery. If the remote's indicator light becomes dim or its range decreases, it's time to replace the battery. Open the remote's casing carefully to access and replace the battery, ensuring correct polarity.
- Чишћење: Wipe the remote control with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Складиштење: Даљински управљач чувајте на сувом месту, даље од екстремних температура и директне сунчеве светлости.
КСНУМКС. Решавање проблема
- Даљински не реагује:
- Проверите батерију. Замените је ако је потребно.
- Ensure you are within the effective transmission range.
- Verify that the remote is correctly programmed to the receiver. If unsure, repeat the programming steps.
- Смањени опсег:
- Замените батерију.
- Check for any new obstructions between the remote and the receiver.
- Ensure there is no interference from other 433MHz devices.
8. Спецификације
| Феатуре | Спецификација |
|---|---|
| Радна фреквенција | 433МХз |
| Воркинг Волtage | ДЦ 12В |
| Трансмиссион Дистанце | Up to 100m (open environment) |
| Метод инсталације | Дизајн на зиду |
| Тип батерије | 12V battery (commonly used) |
| Метода кодирања | Роллинг цоде |
| Димензије (Д x Ш x В) | 64 мм (2.52 инча) x 40 мм (1.57 инча) x 16 мм (0.63 инча) |
Figure 4: Dimensions of the BFT remote control.
9. Сценарији примене
The BFT Mitto Series remote control is versatile and can be used in various applications:
- Системи паметне куће
- Access Control Barrier Gates
- Системи за контролу осветљења
- Industrial Equipment Control
- Сигурносни системи
- Контрола гаражних врата
- Пољопривредне машине
- Main Gates, Fences, Sliding Doors, Railings
Figure 5: Common applications for the remote control.
Figure 6: Additional application examples for the remote control.
10. Садржај пакета
Пакет укључује:
- 1 к бежични даљински управљач
Слика 7: Прample of the 4-key remote control with keychain.
11. Савети корисника
Нису били доступни конкретни савети за кориснике од стране reviewили питања и одговори за овај производ.
12. Гаранција и подршка
For any questions, technical support, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt for warranty claims.