1. Увод
The FOSSiBOT FAC580 is a high-efficiency alternator charger designed to power your FOSSiBOT power station or compatible third-party power stations directly from your vehicle's alternator. Delivering up to 580W of power, it charges significantly faster than traditional in-vehicle cigarette chargers, ensuring your devices are ready for use during your journeys. This manual provides essential information for safe installation, operation, and maintenance of your FAC580 charger.
2. Безбедносне информације
Please read all safety instructions carefully before using the FOSSiBOT FAC580 Alternator Charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Ensure the charger is installed in a well-ventilated area to prevent overheating.
- Не излажите пуњач води, киши или прекомерној влази.
- Keep the charger away from flammable materials and explosive gases.
- Always ensure the vehicle's engine is off and the FAC580 switch is in the off position before connecting or disconnecting cables to the car battery.
- Користите само приложене каблове и додатну опрему.
- Do not attempt to disassemble or modify the charger. Contact customer support if service is required.
- The FAC580 features multi-layer protection including short-circuit, over-current, over-heat, and over-voltage protection to safeguard your car battery, charger, and power station.
3. Садржај пакета
Проверите да ли су све ставке присутне у вашем пакету:
- 1 x FOSSiBOT FAC580 Alternator Charger
- 1 x Input Cable (5M)
- 1 x Output Cable (0.5M)
- 4 к завртњи
- 1 к одвијач
- 1 к Упутство за употребу

4. Производ је готовview
The FOSSiBOT FAC580 is designed for ease of use and efficient charging. Familiarize yourself with its components:

- Wire terminal to MC4: Connects to your power station.
- Индикатор напајања: Displays the product's operational status.
- Лепеза: Provides active cooling for product heat dissipation.
- Дугме за пребацивање: Controls power on/off and selects charging modes.
- Wire crimping terminal to O-ring terminal: Connects to the car battery.
The FAC580 is available in two colors: Classic Black and Vibrant Green.


5. Водич за инсталацију
Follow these steps to properly install your FOSSiBOT FAC580 Alternator Charger in your vehicle:

- Корак 1: Повежите каблове
Fix the input and output lines to the FAC580 with the provided screws. Before final installation, check that the product functions properly. Connect the output and input cables of the FAC580 correctly. - Step 2: Track
Route the input cable from the vehicle's interior to the car battery compartment. Ensure the cable is securely routed and not exposed to moving parts or sharp edges. - Step 3: Wire to Battery
Ensure the FAC580 switch is in the off position. Connect the input cable to the car battery: the red wire connects to the Battery positive (+) terminal, and the black wire connects to the Battery negative (-) terminal. - Step 4: Fixed
Securely fix the FAC580 onto a suitable surface within your car, such as the car wall or trunk, using the provided screws. Ensure it is stable and won't move during driving.

- Step 5: Connect Power Station
Connect your power station to the FAC580 using the XT90-MC4 cable. - Step 6: Select Mode & Start Charging
Switch the FAC580 to the desired mode to begin charging.
6. Упутство за употребу
The FAC580 features a two-stage power switch to adjust output power based on input voltage, ensuring efficient and safe charging. The charger automatically stops charging if the input voltage je van dometa.

6.1. Режими пуњења
- Mode 1 (Recommended for Driving): Activate this mode during journeys for fast car charging.
- Улазни волtage >14V: Auto boost to 580W (Fast Charging)
- Улазни волtage 13.2V-14V: 300W Max Output

Image: Depicts the FAC580 charging a power station in a vehicle while driving, utilizing Mode 1. - Mode 2 (Emergency Use Only): Use this mode when you need urgent power with the engine off. The FAC580 instantly powers your power station and protects your car's battery while charging.
- Улазни волtage >14V: Auto boost to 580W (Fast Charging)
- Улазни волtage 13.2V-14V: 300W Max Output

Image: Shows the FAC580 providing emergency power to a power station from a vehicle with the engine off, using Mode 2.
6.2. Automatic Cut-off
- Улазни волtage <13.2V: The charger automatically cuts off to prevent draining your car battery.
7. Спецификације
Detailed technical specifications for the FOSSiBOT FAC580 Alternator Charger:

| Категорија | Детаљ |
|---|---|
| генерал | Марка: FOSSiBOT Type: Alternator Charger Модел: ФАЦ580 Color: Black (also available in Gray) |
| Спецификације улазног напајања | Цхаргинг Волtage Range: 12V - 18V / 24V - 33V Ундер-Волtage Protection (UVP): 12V Ундер-Волtage Recovery: 12.5V Овер-Волtage Protection (OVP): 35V Овер-Волtage Recovery: 31V |
| Излазне спецификације | Називна излазна снага: 580В No-Load Output Voltagе: 45 - 48В Максимална излазна струја: 15A Ефикасност пуњења: 92% Потрошња енергије у стању приправности: <3В |
| Тежина и величина | Тежина производа: 0.8 кг Тежина пакета: 1 кг Product Size (L x W x H): 18.2 x 16.2 x 4.7 cm Величина паковања (Д x Ш x В): 19 x 17 x 5 цм |

КСНУМКС. Решавање проблема
If you encounter issues with your FOSSiBOT FAC580, refer to the following common problems and solutions:
- Charger not turning on or charging:
- Check all cable connections to ensure they are secure and correctly wired to the car battery and power station.
- Verify the car battery voltagе. Ако је улазна волtage is below 13.2V, the charger will automatically cut off to protect the car battery. Start the vehicle's engine to increase alternator output.
- Ensure the FAC580 switch is in the correct operating mode (Mode 1 or Mode 2).
- Спора брзина пуњења:
- Ensure the vehicle's engine is running and the alternator is providing sufficient power. Mode 1 (driving mode) is designed for optimal charging during journeys.
- Проверите улазну волtage. If it's between 13.2V-14V, the output will be limited to 300W. For 580W fast charging, the input voltage needs to be >14V.
- Пуњач је врућ:
- The FAC580 has a professional cooling system with fans. Ensure the vents are not blocked and there is adequate airflow around the unit.
- The charger has over-heat protection and will reduce output or shut down if it gets too hot. Allow it to cool down.
9. Савети корисника
- Cable Inclusion: The FAC580 package includes all necessary cables (5M input cable, 0.5M output cable) for installation in your vehicle, along with screws and a screwdriver.
- Оптимално постављање: For best performance and cooling, install the FAC580 in a location with good air circulation, such as the trunk or a dedicated compartment, away from direct sunlight or heat sources.
- Engine-Off Charging: When using Mode 2 for emergency engine-off charging, monitor your car battery's voltage to ensure it doesn't drop too low, although the charger has built-in protection.
10. Гаранција и подршка
The FOSSiBOT FAC580 Alternator Charger comes with a 1-year warranty. For technical support, warranty claims, or any questions regarding your product, please contact your retailer or FOSSiBOT customer service. Please have your purchase receipt and product model number ready when contacting support.


