Увод
This manual provides detailed instructions for the installation, operation, and maintenance of your KOHLER Margaux Rite-Temp Bath and Shower Faucet Trim with Lever Handle (Model K-T16233-4-BN). Please read all instructions carefully before beginning installation to ensure proper function and to avoid injury or product damage. Keep this manual for future reference.
Важне информације о безбедности
- Увек искључите главни довод воде пре инсталирања или сервисирања славине.
- Носите одговарајућу личну заштитну опрему, као што су заштитне наочаре, током инсталације.
- Ако нисте сигурни у вези са било којим делом процеса инсталације, консултујте квалификованог водоинсталатера.
- Уверите се да се поштују сви локални водоводни и грађевински прописи.
- Do not overtighten connections, as this may cause damage.
Required Rite-Temp® Valve System
This faucet trim requires a 1/2" pressure-balancing valve with a push-button diverter. For optimal performance, ensure you select the correct valve for your shower trim application.
слика: Selection guide for KOHLER Rite-Temp Valve Systems. The K-11748-K-NA valve is typically used in residential applications. The K-11748-KS-NA valve includes screwdriver stops for water shut-off during service or maintenance and is typically used in hospitality or multi-family applications.
- К-11748-К-НА: Обично се користи у стамбеним применама.
- К-11748-КС-НА: Includes screwdriver stops, allowing water to be shut off at the valve for service or maintenance. Typically used in hospitality or multi-family applications.
Упутство за инсталацију
- Припремите простор за инсталацију: Ensure the rough-in valve (e.g., K-11748-K-NA or K-11748-KS-NA) is correctly installed according to its specific instructions and local plumbing codes. The valve body should be securely mounted and plumb.
- Install the Trim Plate: Apply a bead of silicone sealant around the back of the trim plate to create a watertight seal against the finished wall. Position the trim plate over the valve body and secure it with the provided screws.
- Install the Handle Assembly: Attach the handle adapter to the valve stem. Align the lever handle with the adapter and secure it with the set screw, typically located on the underside of the handle.
- Install the Showerhead and Tub Spout: Thread the shower arm into the wall fitting and then attach the showerhead. For the tub spout, apply thread sealant to the pipe threads and screw the spout onto the pipe, ensuring it is properly aligned and tightened.
- Тест за цурење: Turn on the main water supply and check all connections for leaks. Operate the faucet handle to ensure proper water flow and temperature control.
Note: Specific installation steps may vary slightly depending on the rough-in valve model and your specific plumbing configuration. Always refer to the detailed instructions provided with your KOHLER Rite-Temp valve.
Operating Your Faucet Trim
- Укључивање/искључивање: Rotate the lever handle to turn the water on or off.
- Контрола температуре: Rotate the lever handle to adjust the water temperature. Typically, rotating counter-clockwise increases hot water, and clockwise increases cold water.
- Функција преусмеравања: The Rite-Temp valve system includes a push-button diverter. Pull the button to divert water flow from the tub spout to the showerhead. Push the button back in to return water flow to the tub spout.
Нега и одржавање
To maintain the finish and performance of your KOHLER faucet trim, follow these guidelines:
- Чишћење: Clean the faucet trim with a soft, damp крпом. Избегавајте абразивна средства за чишћење, јаке хемикалије или жичане сунђере, јер могу оштетити завршну обраду.
- Уклањање мрља: For stubborn spots, use a mild soap and water solution, then rinse thoroughly and dry with a soft cloth.
- Избегавајте средства за чишћење на бази воска: Не користите средства за чишћење која садрже восак, јер се могу накупити и помутити завршну обраду.
- Showerhead Cleaning: Periodically clean the showerhead nozzles to remove mineral deposits. Many KOHLER showerheads feature flexible nozzles that can be rubbed to dislodge deposits.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Низак проток воде | Зачепљене млазнице туша или аератор. | Clean showerhead nozzles. Remove and clean the aerator (if applicable). |
| Флуктуације температуре воде | Issue with the Rite-Temp pressure-balancing valve. | Consult the Rite-Temp valve installation guide or contact KOHLER customer service. |
| Leaks from Handle or Trim Plate | Лабави спојеви или оштећени заптивке. | Ensure all connections are tight. Inspect and replace seals or O-rings if damaged. |
| Diverter Not Functioning | Debris in diverter mechanism or worn parts. | Inspect diverter for obstructions. If issue persists, contact a qualified plumber or KOHLER support. |
Спецификације
- Бренд: Кохлер
- Број модела: Т16233-4-БН
- Боја: Живописни брушени никл
- Материјал: Brass (Handle Material), Nickel (Faucet Material)
- Тип завршетка: Брусхед
- Број ручки: 1
- Тип монтаже: Валл Моунт
- Тежина артикла: 5 фунти
- Укључене компоненте: Margaux Rite-Temp Bath and Shower Faucet Trim with Lever Handle
- УПЦ: 650531483454
Product Features Video: Katalyst Air-Induction Spray
видео: This video demonstrates the KOHLER Katalyst Air-Induction Full-Coverage Spray technology, showcasing how air is infused into the water droplets to create a more voluminous and consistent shower experience.
Гаранција и подршка
Овај KOHLER производ је покривен Доживотна ограничена гаранција. For detailed warranty information, service, or technical support, please contact KOHLER customer service directly. You can find contact information on the official KOHLER webсајту или погледајте документацију која је приложена уз ваш производ.
