1. Производ је готовview
An image of the COX M75 manual epoxy applicator, featuring a blue frame, black handle, and metal components for dispensing dual cartridges.
Кључне карактеристике
- Dedicated mix ratio 1:1
- Stubby cartridge system
- Мецханицал адванtagе 18:1
- Support discs - secure and accurate cartridge fit
- Wear Compensating Device (WCD)
- Catch plate - sintered steel
- High viscosity materials capability
Опис производа
The COX M75 is a manual dispenser designed for dual 75ml x 75ml cartridges. It features a stubby cartridge system and provides a mechanical advantage of 18:1, making it suitable for use with low to medium viscosity materials. The applicator includes support discs to ensure a secure and accurate cartridge fit, a durable sintered steel catch plate, and a wear compensating device for extended product life. COX is a recognized leader in quality applicators, with all products manufactured to rigid quality management standards for reliability and durability.
2. Безбедносне информације
Always read and understand all safety warnings and instructions before operating this applicator. Failure to do so may result in injury or damage to the product.
- Заштита очију: Always wear appropriate eye protection (safety glasses or goggles) when handling epoxy materials and operating the applicator.
- Заштита коже: Wear chemical-resistant gloves to prevent skin contact with epoxy resins, which can cause irritation or sensitization.
- вентилација: Use the applicator in a well-ventilated area to avoid inhaling fumes from epoxy materials.
- Безбедносни листови материјала (МСДС): Refer to the MSDS provided by the epoxy material manufacturer for specific handling, storage, and disposal instructions.
- Правилно одлагање: Dispose of used cartridges and any epoxy waste according to local regulations.
- Чувајте ван домашаја деце: Store the applicator and epoxy materials in a secure location away from children and pets.
- Прегледајте пре употребе: Before each use, inspect the applicator for any signs of damage or wear. Do not use if damaged.
3. Подешавање
- Prepare Cartridges: Ensure the dual 75ml x 75ml epoxy cartridges are at the recommended temperature for dispensing as specified by the epoxy manufacturer. Remove any caps or seals from the cartridge nozzles.
- Retract Plunger: Pull the plunger rod of the applicator all the way back until it locks into place, creating space for the cartridges.
- Insert Cartridges: Carefully insert the dual epoxy cartridges into the applicator's frame. Ensure the cartridge nozzles are aligned with the front opening and the base of the cartridges rests securely against the support discs. The stubby cartridge system is designed for a precise fit.
- Attach Mixing Nozzle: Securely attach the appropriate static mixing nozzle to the end of the cartridges. Ensure it is tightly fastened to prevent leaks during dispensing.
4. Упутство за употребу
- Initial Dispense (Purge): Before applying to your workpiece, dispense a small amount of material onto a scrap surface. This ensures proper mixing within the nozzle and purges any unmixed material.
- Нанесите материјал: Position the nozzle at the desired application point. Squeeze the trigger handle to dispense the epoxy. The 18:1 mechanical advantage provides efficient dispensing for low to medium viscosity materials.
- Control Flow: Maintain steady pressure on the trigger for a consistent bead. Release the trigger to stop the flow.
- Ослободите се притиска: After dispensing, press the thumb release lever (located near the handle) to disengage the plunger rod. This relieves pressure on the cartridges and prevents material from continuing to flow.
- Remove Cartridges: Once dispensing is complete or if changing cartridges, fully retract the plunger rod and carefully remove the cartridges from the applicator.
5. Одржавање
Proper maintenance ensures the longevity and optimal performance of your COX M75 applicator.
- Чишћење: After each use, clean any epoxy residue from the applicator frame, plunger rod, and especially the sintered steel catch plate. Use a suitable solvent recommended by the epoxy manufacturer for cleaning uncured epoxy. Avoid harsh abrasives that could damage the finish.
- подмазивање: Periodically apply a light coat of silicone-based lubricant to the plunger rod to ensure smooth operation.
- Inspect Wear Compensating Device (WCD): The WCD is designed to maintain consistent pressure over time. Regularly check its function to ensure proper engagement with the plunger rod.
- Складиштење: Store the applicator in a clean, dry place, away from direct sunlight and extreme temperatures. Ensure the plunger rod is fully retracted before storage.
- Одржавање млазница: Always remove and properly dispose of used mixing nozzles. Do not attempt to clean and reuse disposable nozzles.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Material not dispensing or dispensing unevenly. | Cartridge not fully seated; Nozzle clogged; Epoxy too cold/viscous; Plunger not engaging properly. | Ensure cartridges are fully inserted and locked. Replace clogged nozzle. Warm epoxy to recommended temperature. Check plunger rod and catch plate for debris or wear. |
| Epoxy leaking from nozzle connection. | Nozzle not tightened sufficiently; Damaged nozzle or cartridge threads. | Tighten nozzle securely. Replace nozzle or cartridge if threads are damaged. |
| Plunger rod difficult to retract or advance. | Lack of lubrication; Debris on rod or catch plate; Bent rod. | Clean and lubricate plunger rod. Remove any debris. If rod is bent, contact customer support for replacement. |
| Cartridges do not fit securely. | Incorrect cartridge size; Damaged support discs. | Ensure you are using 75ml x 75ml dual cartridges. Inspect support discs for damage. |
7. Спецификације
| Атрибут | Детаљ |
|---|---|
| Бранд | ЦОКС |
| Број модела | М75 |
| Запремина ставке | 75 Milliliters x 75 Milliliters (for dual cartridges) |
| Мецханицал Адванtage | 18:1 |
| Компатибилан материјал | Epoxy Resin (Metal compatible) |
| Тежина артикла | Отприлике 1 фунта |
| Димензије пакета | Приближно 14.84 к 8.98 к 4.02 инча |
| Земља порекла | Уједињено Краљевство |
| УПЦ | 717647310750 |
8. Гаранција и подршка
COX products are manufactured to high standards of quality and durability. For specific warranty information, please refer to the documentation included with your purchase or visit the official COX North America website. For technical support, spare parts, or service inquiries, please contact COX North America directly.
Произвођач: COX North America
Webсајт: ввв.цок-апплицаторс.цом (This is a general placeholder link, please refer to official product documentation for exact support contact details.)
