Altronix AL175X220

ALTRONIX AL175X220 Power Supply User Manual

Model: AL175X220

1. Увод

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the Altronix AL175X220 Power Supply. Please read this manual thoroughly before attempting to install or operate the unit to ensure proper functionality and safety.

Altronix AL175X220 Power Supply unit with its enclosure open, revealing internal components and a battery compartment.

Figure 1: Altronix AL175X220 Power Supply with enclosure open.

This image displays the Altronix AL175X220 Power Supply unit. The metal enclosure is open, showing the internal circuit board, transformer, and a black battery located at the bottom. Wiring connects the components within the enclosure.

2. Подешавање и инсталација

Proper installation is crucial for the safe and efficient operation of the AL175X220. Ensure all local and national electrical codes are followed.

2.1 Монтажа

  1. Select a suitable mounting location that is dry, well-ventilated, and protected from extreme temperatures and moisture.
  2. Securely mount the power supply enclosure to a wall or other stable surface using appropriate fasteners.

2.2 Ожичење

  1. Улазна снага: Connect the 220V AC input power to the designated terminals on the power supply board. Ensure the power source is de-energized before making connections.
  2. Излазна снага: Connect your devices requiring 12VDC or 24VDC to the appropriate output terminals. Verify correct polarity.
  3. Резервна батерија (опционо): If using battery backup, connect a compatible 12V or 24V battery to the battery terminals. Observe correct polarity (+ to + and - to -).
  4. уземљење: Уверите се да је уређај правилно уземљен у складу са локалним електричним прописима.

WARNING: Disconnect all power before servicing the unit.

3. Упутство за употребу

Once installed, the AL175X220 operates automatically. Follow these steps for initial power-up.

  1. After all wiring connections are complete and verified, apply 220V AC power to the unit.
  2. Observe the status indicator LEDs (if present) on the circuit board. Refer to the product's technical specifications for LED meanings.
  3. The unit will begin providing regulated 12VDC or 24VDC output to connected devices and will charge the connected backup battery (if installed).

4. Одржавање

The AL175X220 is designed for reliable operation with minimal maintenance. However, periodic checks can help ensure longevity and performance.

  • Годишња инспекција: Annually inspect the unit for any signs of physical damage, loose connections, or corrosion.
  • Battery Check (if applicable): If a backup battery is installed, check its condition and charge level periodically. Replace batteries every 3-5 years or as recommended by the battery manufacturer.
  • Чишћење: Keep the enclosure clean and free of dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.

КСНУМКС. Решавање проблема

If the AL175X220 is not functioning as expected, refer to the following common issues and solutions.

  • Без излазне снаге:
    • Check the 220V AC input power source.
    • Проверите да ли су сви прикључци ожичења безбедни и исправни.
    • Check for blown fuses or tripped circuit breakers within the unit or external power circuit.
  • Батерија се не пуни:
    • Ensure the battery is properly connected with correct polarity.
    • Check the battery's condition; it may be faulty or at the end of its life.
    • Verify AC input power is present.
  • Стање преоптерећења:
    • If the unit shuts down or indicators suggest an overload, disconnect some load devices.
    • Ensure the total current draw of connected devices does not exceed the power supply's rated output (1.5AMP).

If problems persist after attempting these solutions, contact Altronix technical support.

6. Спецификације

СпецификацијаВалуе
МоделАЛ175Кс220
Улазни волtage220В АЦ
Оутпут Волtage12VDC / 24VDC (selectable)
Излазна струја1.5 AMP
ПроизвођачАЛТРОНИКС
ASINB002PNC9HC
Датум првог доступног12. фебруара 2012. године

7. Информације о гаранцији

Altronix products are designed for high reliability. For detailed warranty terms and conditions, please refer to the official Altronix webсајт или гарантни лист који се налази у паковању производа. Сачувајте доказ о куповини за потребе гарантног захтева.

8. Техничка подршка

For technical assistance, product inquiries, or service, please contact Altronix customer support through their official webсајт или контакт информације наведене у документацији вашег производа.

Altronix Official Webсајт: ввв.алтроник.цом (Напомена: Ово је генерички резервисани текст URL as specific support links were not provided.)

Повезани документи - АЛ175Кс220

Преview Altronix T2MK7F8PQ 8-Door Access and Power Integration Kit Installation Guide
Comprehensive installation guide for the Altronix T2MK7F8PQ, an 8-door access and power integration kit. Details overview, configuration, installation steps, and enclosure dimensions.
Преview Алтроник АЛТВ1224Ц4220 АЦ/ДЦ водич за инсталацију напајања са два излаза
Installation guide for the Altronix ALTV1224C4220 AC/DC Dual Output Power Supply, detailing specifications, installation steps, fuse replacement, and terminal identification for providing 12VDC and 24VAC outputs.
Преview Altronix ALTV244UL3 Series CCTV Power Supplies Installation Guide
Installation guide for Altronix ALTV244UL3 Series CCTV Power Supplies, detailing models ALTV244UL3, ALTV244ULX3, ALTV244175UL3, ALTV244ULCB3, and ALTV244175ULCB3. Includes product overview, specifications, installation instructions, terminal identification, and enclosure dimensions.
Преview Altronix Trove2/Mercury комплети са осигураним излазима - водич за инсталацију
Упутство за инсталацију Altronix Trove2/Mercury комплета, са детаљним описом различитих модела осигураних излаза, опција конфигурације и упутстава за монтажу система контроле приступа. Укључује прекоview, дијаграме конфигурације, кораке инсталације и димензије кућишта.
Преview Водич за инсталацију извора напајања Алтроник Р1224ДЦ16ЦБВ за монтирање у сталак
Упутство за инсталацију напајања за монтажу у рек, Altronix R1224DC16CBV, са детаљним спецификацијама, карактеристикама и поступцима инсталације корак по корак за монтажу у рек или полицу. Обезбеђује излаз од 12VDC или 24VDC са 16 PTC заштићених излаза.
Преview Упутство за инсталацију напајања/пуњача за контролу приступа Altronix AL175ULX
Свеобухватни водич за инсталацију Altronix AL175ULX, напајања и пуњача са ограниченом снагом за системе контроле приступа и интерфејсе за противпожарне аларме. Укључује спецификације, дијаграме ожичења и поступке одржавања.