D-Link DGS-1210-48 48-Port Gigabit Smart Switch User Manual

1. Увод

This manual provides detailed instructions for the installation, configuration, and operation of the D-Link DGS-1210-48 48-Port Gigabit Smart Switch. This device is a web-managed switch designed for small to medium-sized businesses, offering advanced management features and high-performance connectivity.

2. Карактеристике производа

• 48 Gigabit Ethernet ports for high-speed network connectivity.
• 4 Combo SFP ports for flexible fiber optic uplink connections.
• Web-based management interface for easy configuration and monitoring.
• Advanced Layer 2 features including VLANs, QoS, and Link Aggregation.
• D-Link Green technology for energy efficiency.
• Switching capacity of 96 Gbps.
• MAC Address Table Size: 8K.
• Packet Forwarding Rate: 71.4 Mpps.

3. Садржај пакета

Проверите да ли су следеће ставке укључене у ваш пакет:

• D-Link DGS-1210-48 48-Port Gigabit Smart Switch
• Повер Цорд
• Комплет за монтажу у рек (носачи и завртњи)
• Гумене ноге (за инсталацију на радној површини)
• Водич за брзу инсталацију
• ЦД-РОМ са приручником и софтвером

Ако било који предмет недостаје или је оштећен, обратите се локалном D-Link продавцу за помоћ.

4. Физички опис

4.1 Предња плоча

Слика 4.1: Front Panel of DGS-1210-48 Switch. This image displays the front of the D-Link DGS-1210-48 switch, featuring 48 RJ45 Gigabit Ethernet ports and 4 SFP (Small Form-Factor Pluggable) ports, along with LED indicators for power, system status, and port activity.

The front panel of the DGS-1210-48 switch features 48 10/100/1000BASE-T Gigabit Ethernet ports for connecting network devices. Additionally, there are 4 Combo SFP ports, which can be used for fiber optic uplinks by inserting compatible SFP transceivers. LED indicators provide visual status for power, system activity, and individual port link/activity.

4.2 Задња плоча

Слика 4.2: Rear Panel of DGS-1210-48 Switch. This image shows the rear panel of the D-Link DGS-1210-48 switch, highlighting the AC power input connector and a grounding screw for electrical safety.

The rear panel includes the AC power input connector for connecting the power cord to an electrical outlet. A grounding screw is also present for connecting the switch to an earth ground, which is recommended for electrical safety and protection against static discharge.

5. Подешавање и инсталација

5.1 Мере предострожности

• Ensure the power cord is disconnected before installation or maintenance.
• Install the switch in a cool, dry place away from direct sunlight and heat sources.
• Ensure proper ventilation around the switch.
• Connect the grounding wire to an appropriate earth ground.

5.2 Инсталација на радној површини

For desktop installation, attach the included rubber feet to the bottom of the switch to prevent scratching and provide stability. Place the switch on a flat, stable surface.

5.3 Инсталација у рацкмоунт

The DGS-1210-48 can be mounted in a standard 19-inch equipment rack. Use the provided rackmount brackets and screws to secure the switch to the rack. Ensure adequate space for airflow.

5.4 Повезивање прекидача

1. Connect your network devices (computers, servers, access points) to the RJ45 ports using standard Ethernet cables.
2. If using fiber optic uplinks, insert compatible SFP transceivers into the SFP ports and connect fiber optic cables.
3. Connect the power cord to the switch's AC power input and then to a power outlet.
4. Verify the Power LED illuminates, indicating the switch is receiving power.

6. Упутство за употребу

6.1 Initial Access to Web Управљачки интерфејс

By default, the DGS-1210-48 switch is configured with a default IP address (e.g., 192.168.0.1) and no password. Refer to the Quick Installation Guide for the exact default IP address.

1. Connect a computer directly to any of the switch's RJ45 ports.
2. Configure your computer's IP address to be in the same subnet as the switch (e.g., if switch is 192.168.0.1, set computer to 192.168.0.10 with subnet mask 255.255.255.0).
3. Отвори а web browser and enter the switch's default IP address in the address bar.
4. Log in using the default username and password (usually 'admin' and no password, or 'admin' for both).
5. It is highly recommended to change the default password immediately after initial login for security purposes.

6.2 Основна конфигурација

Једном када сте пријављени у web интерфејс, можете конфигурисати разна подешавања:

• ИП адреса: Change the switch's IP address to match your network's addressing scheme.
• ВЛАН: Create and configure Virtual Local Area Networks to segment network traffic.
• КоС (квалитет услуге): Prioritize critical network traffic for optimal performance.
• Агрегација веза: Комбинујте више физичких веза у једну логичку везу за повећани пропусни опсег и редундантност.
• Подешавања порта: Configure individual port speed, duplex mode, and enable/disable ports.

Refer to the full user manual on the provided CD-ROM for detailed configuration instructions for advanced features.

7. Одржавање

7.1 Ажурирања фирмвера

Периодично проверавајте подршку за D-Link website for firmware updates. Firmware updates can provide new features, performance improvements, and security enhancements. Follow the instructions provided with the firmware update package carefully.

7.2 Cleaning the Switch

To clean the switch, disconnect the power cord. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and obstructions.

7.3 Ресетовање на фабричка подешавања

If necessary, the switch can be reset to its factory default settings. This typically involves pressing and holding a reset button (often recessed) for a specified duration. Refer to the full user manual for the exact procedure, as this will erase all custom configurations.

КСНУМКС. Решавање проблема

This section provides solutions to common issues you may encounter with the DGS-1210-48 switch.

8.1 Power LED is Off

• Уверите се да је кабл за напајање безбедно повезан са прекидачем и исправном утичницом.
• Проверите да ли је утичница функционална тако што ћете укључити други уређај.
• Проверите да ли кабл за напајање има оштећења.

8.2 Нема мрежне везе

• Check the Link/Act LEDs on the switch for the connected ports. A solid green or blinking LED indicates a valid link and activity.
• Ensure Ethernet cables are properly connected and not damaged.
• Verify the network settings (IP address, subnet mask, gateway) on your connected devices.
• If using SFP ports, ensure the SFP transceivers are compatible and correctly inserted, and fiber cables are intact.

8.3 Не могу приступити Web Управљачки интерфејс

• Уверите се да је ИП адреса вашег рачунара у истој подмрежи као и ИП адреса прекидача.
• Ensure you are using the correct IP address for the switch. If you changed it and forgot, you may need to reset the switch to factory defaults.
• Покушајте другачије web претраживач.
• Temporarily disable any firewall software on your computer.

9. Спецификације

10. Безбедносне информације

• Не отварајте уређај цasinг. Сва сервисирања препустите квалификованом сервисном особљу.
• Уверите се да је напајање волtagе је унутар наведеног опсега (240В).
• Заштитите кабл за напајање од гажења или прикљештења.
• Avoid placing the switch near water or in excessively humid environments.
• Користите само адаптер за напајање који сте добили уз уређај.

11. Гаранција и техничка подршка

For warranty information and technical support, please refer to the warranty card included with your product or visit the official D-Link website. Support resources typically include FAQs, troubleshooting guides, and contact information for technical assistance.

Званични Д-Линк Webсајт: ввв.длинк.цом