Leviton 1254-R

Левитон 15 Amp 125 Volt Industrial Grade 4-in-1 Receptacle (Model 1254-R) Instruction Manual

Модел: 1254-R

1. Увод

This manual provides detailed instructions for the safe installation, operation, and maintenance of the Leviton 15 Amp, 125 Volt, Industrial Series Extra Heavy Duty Grade, 4-In-1 Receptacle, Model 1254-R. This device is designed for demanding environments requiring high-abuse tolerance, such as healthcare facilities, manufacturing plants, and educational institutions. It features four outlets in a single-gang footprint, offering increased power access without requiring larger electrical boxes.

2. Безбедносне информације

УПОЗОРЕЊЕ: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. All wiring must be in accordance with national and local electrical codes. If you are unsure about any part of these instructions, consult a qualified electrician.

3. Садржај пакета

The package for the Leviton 1254-R 4-in-1 Receptacle typically includes:

4. Спецификације

ФеатуреДетаљ
Број модела1254-Р
Ampераге15 Amp
Волtage125 Волт
ОценаIndustrial Series Extra Heavy Duty Grade
Рецептацле Типе4-In-1, Straight Blade, Grounding
БојаЦрвени
МатеријалThermoplastic Nylon (Cover and Body)
Опције ожичењаBack and Side Wiring
КонтактиExtra Heavy-Duty, T-type triple-wipe bronze
ДимензијеПриближно 8 x 8 x 8 инча (димензије производа)
ТежинаОтприлике 6.4 унци

5. Инсталација

Follow these steps for proper installation of your Leviton 4-in-1 Receptacle. If you are not familiar with electrical wiring, consult a qualified electrician.

  1. Искључите напајање: Locate the circuit breaker or fuse that controls the outlet where you intend to install the receptacle. Turn it OFF. Verify that the power is off using a voltagе тестер.
  2. Уклоните стару утичницу (ако је применљиво): Unscrew the wall plate and then the mounting screws holding the existing receptacle in the electrical box. Carefully pull the old receptacle out of the box.
  3. Искључите жице: Disconnect the wires from the old receptacle. Note which wire was connected to which terminal (hot, neutral, ground).
  4. Припремите жице: Strip approximately 1/2 inch of insulation from the ends of the wires if necessary. Ensure the wire ends are clean and straight.
  5. Connect Wires to New Receptacle:
    • Повежите HOT (Black or Red) жице за Месинг терминални завртњи.
    • Повежите НЕУТРАЛНА (бела) жице за Сребро терминални завртњи.
    • Повежите GROUND (Green or Bare Copper) жице за Зелена вијак за уземљење.

    This receptacle supports both back-wiring (inserting wires into holes on the back and tightening screws) and side-wiring (wrapping wires around terminal screws). Ensure connections are tight and no bare wire is exposed outside the terminals.

    Leviton 1254-R 4-in-1 Receptacle, Red

    Слика 5.1: Предња страна view of the Leviton 1254-R 4-in-1 Receptacle in Red. This image shows the four outlets and the robust construction.

    Close-up of receptacle wiring terminals

    Слика 5.2: Крупни план view of a Leviton receptacle's wiring terminals, illustrating the side-wiring option and the grounding screw.

  6. Прикључак за монтажу: Carefully push the wired receptacle back into the electrical box. Secure it with the provided mounting screws.
  7. Инсталирајте зидну плочу: Attach the wall plate over the receptacle.
  8. Врати снагу: Turn the circuit breaker or fuse back ON.
  9. Тест: Plug a device into each of the four outlets to ensure proper function.

The 1254-R features an interlocking thermoplastic nylon cover and body for enhanced durability and a nickel-plated brass strap with integral ground contacts for reliable grounding. The permanent "Green Dot" marking on the face indicates its hospital/industrial grade compliance.

Close-up of receptacle with green dot marking

Image 5.3: Detail showing the "Green Dot" marking, signifying the industrial/hospital grade rating of the receptacle.

6. Операција

The Leviton 1254-R 4-in-1 Receptacle operates like any standard electrical outlet. Simply insert the plug of your electrical device into one of the four available receptacles. Ensure the plug is fully inserted for a secure connection. The extra heavy-duty, T-type triple-wipe bronze contacts provide maximum performance and a strong grip on cords.

7. Одржавање

This industrial-grade receptacle requires minimal maintenance. Periodically inspect the receptacle for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power at the circuit breaker and replace the receptacle immediately. Clean the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.

КСНУМКС. Решавање проблема

ПроблемМогући узрокРешење
Нема струје на утичници.Аутоматски осигурач се искључио или је осигурач прегорео. Лабава веза ожичења.Check and reset the circuit breaker or replace the fuse. Turn off power and inspect wiring connections for tightness.
Device plug feels loose in the outlet.Worn contacts (unlikely for new industrial grade). Incorrect plug type.Ensure the plug is fully inserted. If the issue persists, and the receptacle is old, consider replacement. Verify plug compatibility.
Receptacle is warm to the touch.Overload on the circuit. Loose wiring connection.Disconnect some devices to reduce load. Turn off power and check wiring connections. If warming persists, consult an electrician.

9. Информације о гаранцији

Leviton products are backed by a limited warranty. For specific warranty terms and conditions applicable to the 1254-R receptacle, please refer to the warranty documentation included with your purchase or visit the official Leviton webсајт. Сачувајте доказ о куповини за потребе гаранције.

10. Подршка

For technical assistance, product information, or customer support, please visit the official Leviton website or contact their customer service department. Contact details can typically be found on the product packaging or the Leviton webсајту.

Левитон Webсајт: ввв.левитон.цом

Повезани документи - 1254-Р

Преview Упутство за инсталацију и употребу Левитон GFCI утичнице са USB портовима
Свеобухватни водич за инсталирање и рад Левитон GFCI утичница са USB портовима, укључујући упутства за ожичење, безбедносна упозорења, поступке тестирања и информације о гаранцији.
Преview Инсталирање и тестирање Leviton Smart GFCI утичнице: Свеобухватни водич
Корак-по-корак упутства за инсталирање и тестирање Leviton Smart GFCI утичница (модели D2GF1, D2GF2). Сазнајте више о функционалности GFCI утичница, ожичењу, решавању проблема и мерама безбедности.
Преview Leviton SmartlockPro GFCI водич за инсталацију и тестирање утичнице
Свеобухватни водич за инсталирање и тестирање Leviton SmartlockPro прекидача уземљења (GFCI) утичница. Обухвата мере предострожности, ожичење, решавање проблема и карактеристике производа.
Преview Левитон GFCI водич за инсталацију и тестирање утичнице
Свеобухватни водич о томе како инсталирати и тестирати Leviton SmartLock Pro GFCI утичницу, укључујући упутства за ожичење, мере предострожности и савете за решавање проблема.
Преview Leviton GFNT1-DIN/GFNT2-DIN Упутство за инсталацију GFCI утичнице за монтажу на DIN шину
Свеобухватни водич за инсталирање и тестирање Левитонових GFNT1-DIN и GFNT2-DIN GFCI утичница за монтажу на DIN шину, укључујући упутства за ожичење, мере предострожности и решавање проблема.
Преview Leviton Smart Wallbox Sensors: Elevate Your Sensing Control Options
Discover Leviton Smart Wallbox Sensors for commercial applications, offering occupancy/vacancy sensing, dimming, switching, energy savings, and code compliance for offices, meeting rooms, and lobbies. Learn about key features and benefits.