Увод
This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of your OSRAM Sylvania QHE3x32T8/UNV-PSN-SC Fluorescent Lamp Ballast. Please read this manual thoroughly before installation and retain it for future reference. This ballast is designed for use with 3-lamp, 32W T8 fluorescent lamps and operates on 120-277V, 50/60Hz electrical systems.
Важна безбедносна упутства
УПОЗОРЕЊЕ: Опасност од струјног удара. Искључите напајање пре инсталације или сервисирања.
- Installation must be performed by a qualified electrician in accordance with the National Electrical Code and local codes and ordinances.
- Уверите се да је залиха волtage is compatible with the ballast's operating voltagе (120-277В).
- Do not install damaged products. Inspect the ballast for damage before installation.
- Немојте правити нити мењати никакве отворене рупе у кућишту ожичења или електричних компоненти током инсталације комплета.
- Да бисте спречили оштећење ожичења или хабање, не излажите жице ивицама лима или другим оштрим предметима.
- This ballast is designed for indoor use in dry locations unless otherwise specified.
- Ground the ballast case properly to prevent electrical hazards.
Производ је завршенview
The OSRAM Sylvania QHE3x32T8/UNV-PSN-SC is a high-efficiency, programmed rapid start electronic ballast designed for optimal performance with T8 fluorescent lamps. It features universal voltage input and lamp striation control for consistent light output.
Кључне карактеристике:
- Programmed Rapid Start T8 Electronic Ballast
- Универсал Волtagе: 120-277В, 50/60Хз
- High-Efficiency - Type CC
- Фактор велике снаге
- Lamp Стриатион Цонтрол
- Звук са оценом А
- Inherent Thermal Protection
- UL Listed Class P, Type 1 Outdoor, Type CC
- Complies with FCC 47 CFR Part 18, Non-Consumer
- No PCBs
Слика 1: Врх view of the OSRAM Sylvania QHE3x32T8/UNV-PSN-SC ballast, showing product labeling and specifications.
Инсталација и ожичење
Before beginning installation, ensure all power to the fixture is disconnected at the circuit breaker. Follow the wiring diagram carefully for proper and safe connection.
Дијаграм ожичења:
Image 2: Detailed wiring diagram for the OSRAM Sylvania QHE3x32T8/UNV-PSN-SC ballast, illustrating connections for input power and lamp излази.
Упутства за ожичење:
- Улазна снага: Connect the black wire to the LINE (L) input and the white wire to the NEUTRAL (N) input. Ensure the ground wire is securely connected to the ballast case and fixture ground.
- Lamp Везе:
- Connect the blue/white wires to the first lamp.
- Connect the blue wires to the second lamp.
- Connect the red wires to the third lamp.
- Connect the yellow wires to the common lamp terminals as indicated in the diagram.
- Монтажа: Securely mount the ballast within the fixture using appropriate fasteners. Ensure adequate ventilation around the ballast.
- Волtagе Компатибилност: This ballast is designed for universal voltage operation (120V or 277V). Verify your supply voltagе матцхес.
Lamp Компатибилност:
This ballast is compatible with the following T8 fluorescent lamp конфигурације:
| Lamp Врсте | Line Current (120V) | Line Current (277V) | Мин. Старт Темп |
|---|---|---|---|
| 3 x FO32T8 | 0.69А | 0.29А | -20°Ф/-29°Ц |
| 3 x FO25T8 | 0.53А | 0.23А | -20°Ф/-29°Ц |
| 3 x FO17T8 | 0.36А | 0.16А | -20°Ф/-29°Ц |
| 2 x FO40T8 | 0.63А | 0.27А | Највиша: 0°Ф/-18°Ц |
| 2 x FO32T8 | 0.51А | 0.23А | -20°Ф/-29°Ц |
Also suitable for "U" bend and SS equivalents.
Упутство за употребу
Once properly installed and wired, the OSRAM Sylvania QHE3x32T8/UNV-PSN-SC ballast operates automatically. Upon applying power, the ballast will initiate the programmed rapid start sequence to ignite the connected fluorescent lamps. This ensures quick and reliable lamp ignition and extends lamp живот.
- Осигурати све лamps are correctly seated in their sockets before applying power.
- The ballast is designed for continuous operation within its specified temperature and voltagе распони.
- No user adjustments are required for normal operation.
Одржавање
The OSRAM Sylvania QHE3x32T8/UNV-PSN-SC ballast is designed for long-term, maintenance-free operation. However, periodic inspection of the lighting fixture and its components is recommended.
- Искључивање струје: Always disconnect power at the circuit breaker before performing any inspection or maintenance.
- Чишћење: Keep the ballast and fixture free from dust and debris to ensure proper heat dissipation. Use a dry, lint-free cloth for cleaning.
- Инспекција ожичења: Периодично проверавајте спојеве ожичења да ли су чврсти и да ли постоје знаци хабања или оштећења.
- Lamp Замена: Замените лamps with compatible T8 fluorescent lamps as specified in the "Lamp Compatibility" section. Ensure power is off during lamp замена.
- Ballast Replacement: If the ballast fails, replace it with an identical OSRAM Sylvania QHE3x32T8/UNV-PSN-SC model or an approved equivalent.
Решавање проблема
If your lighting fixture is not operating correctly, consult the following troubleshooting guide. Always disconnect power before attempting any inspection or repair.
| Проблем | Могући узрок | Решење |
|---|---|---|
| Lampс не светле | Нема струје за уређај Нетачно ожичење Неисправан лamps Неисправан баласт | Проверите осигурач и зидни прекидач. Verify wiring against the diagram. Замените лamps with known good ones. Replace ballast if lamps are good and wiring is correct. |
| Lamps flicker or are dim | Лоосе лamp везе Нетачно лamp тип Ниска улазна волtage Старење лamps | Осигурати лamps are securely seated. Проверите лamps are compatible T8 types. Проверите снабдевање волtage. Замените лamps. |
| Ballast hums excessively | Лоосе моунтинг Нетачна волtage Internal ballast issue | Затегните монтажне завртње. Провери унос волtage. Replace ballast if hum persists and is excessive. |
Техничке спецификације
| Феатуре | Детаљ |
|---|---|
| Број модела | QHE3x32T8/UNV-PSN-SC |
| Парт Нумбер | 51413 |
| Бранд | OSRAM (Manufacturer: Sylvania) |
| Улазни волtage | КСНУМКС-КСНУМКСВ АЦ |
| Фреквенција | 50/60Хз |
| Lamp Тип | T8 Fluorescent (e.g., F32T8, FO32T8, F25T8, F17T8, F40T8) |
| Број Лamps | 3 (or 2 for F40T8/F32T8) |
| Ватtage (per lamp) | 32W (for F32T8) |
| Старт Метход | Програмирани брзи старт |
| Ефикасност | High-Efficiency - Type CC |
| Фактор снаге | Фактор велике снаге |
| Тежина артикла | 1.32 фунти (приближно 0.6 кг) |
| Димензије производа (Д к Ш к В) | 9.5 x 1.68 x 1.18 инча (приближно 24.1 x 4.3 x 3.0 цм) |
| Min. Start Temperature | -20°F (-29°C) for most T8 lamps; 0°F (-18°C) for 2xFO40T8 |
| Цертификати | UL Listed, Type CC, FCC 47 CFR Part 18, RoHS compliant |
Информације о гаранцији
OSRAM products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to the QUICKTRONIC® QHE3x32T8/UNV-PSN-SC ballast, please refer to the official OSRAM/Sylvania warranty documentation provided with your purchase or visit the OSRAM website. Typically, electronic ballasts come with a limited warranty covering defects in materials and workmanship under normal use.
Note: The "QUICK60+" System Warranty mentioned on the product label refers to a system warranty when used with specific OSRAM lamps. Consult OSRAM for details.
Корисничка подршка
For technical assistance, product inquiries, or support, please contact OSRAM/Sylvania customer service.
Technical Assistance Hotline: 1-800-LIGHTBULB (as indicated on product label)
You may also visit the official OSRAM webсајт за додатне ресурсе и опције контакта.
