Horizon MH-338 Digital Precision Scale User Manual

Производ је завршенview

The Horizon MH-338 is a compact digital precision scale designed for accurate measurements up to 200 grams with a 0.01 gram increment. Its design resembles a computer mouse, offering a discreet and portable solution for various weighing needs.

Кључне карактеристике:

• 200g Capacity with 0.01g Reading Increment
• High Accuracy and Reliability
• Multiple Weighing Modes (g, oz, ct, gn)
• Tare Function for Net Weight Measurement
• Функција аутоматског искључивања

Сетуп

1. Распакивање и преглед

Carefully remove all components from the packaging. Inspect the scale for any signs of damage. The package should include the MH-338 scale, two AAA batteries, and this user manual.

Image: Contents of the Horizon MH-338 scale package, including the scale, batteries, and user manual.

2. Инсталација батерије

1. Пронађите одељак за батерије на доњој страни ваге.
2. Отворите поклопац одељка за батерије.
3. Уметните две ААА батерије, водећи рачуна о исправном поларитету (+/-).
4. Добро затворите поклопац одељка за батерије.

Image: The underside of the Horizon MH-338 scale, illustrating the battery compartment for AAA battery installation.

КСНУМКС. Постављање

Place the scale on a flat, stable, and vibration-free surface to ensure accurate readings. Avoid placing it near strong electromagnetic fields or extreme temperature changes.

Операција

1. Укључивање/искључивање

• Да бисте укључили вагу, притисните дугме [УКЉУЧЕНО/ИСКЉУЧЕНО] button. The LCD display will illuminate and show "0.00g".
• Да бисте искључили вагу, притисните и држите [УКЉУЧЕНО/ИСКЉУЧЕНО] button for a few seconds until the display turns off. The scale also features an automatic power-off function after 90 seconds of inactivity to conserve battery life.

Слика: Детаљна view of the Horizon MH-338 scale's LCD display and the 'M' (Mode) and 'ON/OFF/T' (Tare/Power) buttons.

2. Избор јединице

Притисните тастер [М] (Mode) button to cycle through the available weighing units: grams (g), ounces (oz), carats (ct), and grains (gn). Select the desired unit before weighing.

3. Функција тарирања

The Tare function allows you to subtract the weight of a container, so you only measure the net weight of the contents.

1. Place an empty container on the weighing platform.
2. Wait for the display to stabilize, then press the [ON/OFF/T] button. The display will reset to "0.00g" (or the selected unit).
3. Додајте предмете које треба мерити у посуду. На екрану ће се приказати нето тежина предмета.

4. Поступак мерења тежине

1. Ensure the scale is on and displaying "0.00g" (or the selected unit).
2. Gently place the item(s) to be weighed onto the center of the stainless steel weighing platform.
3. Wait for the display to stabilize. The stable weight will be shown on the LCD.

Image: The Horizon MH-338 scale in use, demonstrating the weighing of fine powder in its lid and loose tea leaves on the platform.

Калибрација

For optimal accuracy, periodic calibration may be required. Refer to the following general steps for calibration. A 200g calibration weight is typically used for this model.

1. Turn the scale ON and wait for it to display "0.00g".
2. Притисните и држите [М] (Mode) button until "CAL" appears on the display, then release.
3. Притисните тастер [М] button again. The display will flash the required calibration weight (e.g., "200.00g").
4. Place the exact calibration weight (e.g., 200g) onto the center of the weighing platform.
5. The display will show "PASS" and then return to normal weighing mode, indicating successful calibration. Remove the weight.

Image: The Horizon MH-338 scale displaying "5.00g" with a small calibration weight placed on its stainless steel platform.

Одржавање

1. Чишћење

Обришите вагу благим дamp cloth. Do not use abrasive cleaners or immerse the scale in water. Keep the weighing platform clean and free of debris.

2. Складиштење

Store the scale in a clean, dry environment at room temperature. Avoid extreme temperatures, humidity, and direct sunlight. If storing for extended periods, remove the batteries to prevent leakage.

3. Замена батерије

When the display shows a low battery indicator (e.g., "Lo"), replace both AAA batteries with new ones to ensure continued accurate operation.

Решавање проблема

• Индикатор „Lo“ или ниске батерије: Замените батерије новим ААА батеријама.
• "OUE2" or "EEEE": Indicates overload. Remove the item from the platform immediately to prevent damage. The maximum capacity is 200g.
• Нетачна очитавања:
  • Уверите се да је вага на равној, стабилној површини.
  • Check for any obstructions under or around the platform.
  • Recalibrate the scale if necessary.
  • Ensure the ambient temperature is stable.
• Вага се не укључује: Проверите да ли су батерије инсталиране и уверите се да су батерије нове и правилно уметнуте.

Спецификације

Гаранција и подршка

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Horizon webсајт. Сачувајте рачун као доказ о куповини.