Shinko 520

Упутство за употребу задње гуме Shinko серије 520

Model: 520 Series | Size: 100/90-19

1. Производ је готовview

The Shinko 520 Series Rear Tire is engineered for off-road motorcycle applications, specifically designed to perform optimally in intermediate to hard terrain conditions. Its construction features a high carbon compound and a directional tread pattern, providing durability and traction. This tire is a tube-type design and is classified as NHS (Not for Highway Service), meaning it is intended exclusively for off-road use.

Shinko 520 Series Rear Tire, showing its aggressive knobby tread pattern.
Image 1.1: The Shinko 520 Series Rear Tire. This image displays the tire's robust construction and the distinct, aggressive knobby tread pattern designed for off-road traction.

2. Упутства за инсталацију

Proper installation is crucial for tire performance and safety. It is highly recommended that tire installation be performed by a qualified professional using appropriate tools and techniques.

2.1 Провере пре инсталације

  • Verify that the tire size (100/90-19) and specifications match your motorcycle's requirements.
  • Inspect the tire for any manufacturing defects or shipping damage before mounting.
  • Ensure the rim is clean, free of damage, and compatible with a tube-type tire.

2.2 Процедура монтаже

  1. Lubricate the tire beads and rim edges with a suitable tire mounting lubricant.
  2. Insert the inner tube into the tire, ensuring it is not twisted. Lightly inflate the tube to give it shape.
  3. Carefully mount one bead of the tire onto the rim.
  4. Position the valve stem through the rim hole.
  5. Mount the second bead onto the rim, taking care not to pinch the inner tube.
  6. Inflate the tire to the recommended seating pressure to ensure both beads are properly seated on the rim. Listen for two distinct pops as the beads seat.
  7. Adjust the tire pressure to the recommended operating pressure for your specific riding conditions.

Important Note: This tire is NHS (Not for Highway Service). Do not use this tire on public roads or highways.

3. Рад и употреба

The Shinko 520 Series Rear Tire is designed for optimal performance in off-road environments. Understanding its characteristics will enhance your riding experience.

3.1 Intended Terrain

This tire excels in intermediate to hard terrain. Its directional tread pattern and reinforced knobs are engineered to provide grip and resist tearing and chunking on varied surfaces, including rocks, hard-packed dirt, and loose topsoil. While it offers good traction in these conditions, its performance in deep mud or very soft sand may vary.

3.2 Притисак у гумама

Optimal tire pressure is critical for performance, handling, and tire longevity. Recommended pressures can vary based on rider weight, motorcycle type, and specific terrain. Experimentation within safe limits may be necessary to find the ideal pressure for your riding style. Lower pressures can increase the tire's contact patch and improve traction on technical terrain, but may also increase the risk of pinch flats or rim damage. Higher pressures are generally better for harder surfaces or higher speeds within off-road limits.

Warning: This tire is M-rated for speeds up to 81 mph. Exceeding this speed rating can lead to tire failure. Always adhere to the NHS (Not for Highway Service) designation.

4. Одржавање

Regular maintenance extends the life of your tire and ensures consistent performance.

  • Притисак у гумама: Check tire pressure before each ride. Adjust as needed based on terrain and load.
  • Визуелни преглед: Regularly inspect the tire for cuts, punctures, cracks, or embedded objects. Pay close attention to the knobs for signs of excessive wear, tearing, or chunking.
  • Хабање газећег слоја: Monitor tread depth. Replace the tire when the tread is worn down to the wear indicators or when traction significantly diminishes.
  • Чишћење: After riding, clean the tire to remove dirt, mud, and debris. This helps prevent material buildup that could hide damage or accelerate wear.
  • Складиштење: Store tires in a cool, dry place away from direct sunlight, chemicals, and ozone-producing equipment (e.g., electric motors).

КСНУМКС. Решавање проблема

This section addresses common issues that may arise during the use of your Shinko 520 Series Rear Tire.

5.1 Poor Traction / Slipping

  • Incorrect Tire Pressure: Both over-inflation and under-inflation can lead to poor traction. Adjust pressure according to terrain and rider preference. For very technical or rocky terrain, slightly lower pressures (e.g., 1.5-3 PSI) might improve grip, but increase risk of rim damage or pinch flats.
  • Worn Tread: If the tire's knobs are significantly worn, its ability to grip will be reduced. Consider tire replacement.
  • Unsuitable Terrain: While designed for intermediate to hard terrain, this tire may not provide optimal traction in extremely soft sand or deep, slick mud.

5.2 Rapid Wear or Knob Damage

  • Aggressive Riding Style: Frequent hard acceleration, braking, or sliding can accelerate wear.
  • Прекомерна инфлација: Can lead to premature wear in the center of the tread.
  • Sharp Objects/Terrain: While reinforced, extreme terrain with sharp rocks or roots can still cause damage. Regular inspection is key.

6. Спецификације

СпецификацијаДетаљ
БрандСхинко
Модел520 Сериес
Величина100/90-19
Ширина секције100 милиметара
Ширина обода19 инча
Пречник пнеуматика100 инча
Пли Ратинг2-Ply (4-ply construction)
Тип газећег слојаДирецтионал
Тип конструкцијеMulti-Ply
Спеед РатингM (up to 81 mph)
Врста услугеТип цеви
Highway UseNHS (Not for Highway Service)
Тежина артикла14.4 унци
УПЦ182682853805
Број дела произвођача87-4337

7. Гаранција и подршка

For specific warranty information regarding the Shinko 520 Series Rear Tire, please refer to the documentation provided at the time of purchase or contact the authorized Shinko dealer or manufacturer directly. Warranty terms typically cover manufacturing defects.

For technical support or further inquiries, please reach out to your tire retailer or the official Shinko customer service channels.

Повезани документи - 520

Преview ВИЛ-101-ТУ テシタル指示濁度/СС 計 取扱説明書
СХИНКО ВИЛ-101-ТУ テシタル指示濁度/СС計の取扱説明書。本製品の設置、機能、操作、配線、仕様、校正、通信、およひトラフルシューティンクに関する詳細情報を提供します。
Преview Shinko WIL-102-ECL дигитални индикаторски мерач проводљивости - упутство за употребу
Упутство за употребу за Shinko WIL-102-ECL дигитални индикаторски мерач проводљивости са утикачем. Покрива инсталацију, ожичење, подешавање, калибрацију, мерење, комуникацију, спецификације и решавање проблема.
Преview Shinko WIL-102-SE дигитални индикаторски мерач отпорности типа утикача, упутство за употребу
Ово упутство за употребу пружа детаљне информације о дигиталном индикаторском мерачу отпорности Shinko WIL-102-SE типа са утичним индуктивним сензором, обухватајући монтажу, функције, рад, ожичење, калибрацију, спецификације и решавање проблема.
Преview Shinko WIL-102-SE Упутство за употребу: Водич за дигитални мерач отпорности
Свеобухватно упутство за употребу за Shinko WIL-102-SE дигитални индикаторски мерач отпорности са утикачем. Покрива инсталацију, рад, подешавање, калибрацију, спецификације, решавање проблема и комуникационе протоколе за индустријско мерење отпорности.
Преview Shinko SIF-600 PLC интерфејс јединица: Упутство за употребу
Ово свеобухватно упутство за употребу детаљно описује Shinko SIF-600 PLC интерфејс јединицу, обухватајући инсталацију, подешавање, рад и решавање проблема за примене индустријске аутоматизације. Неопходно је за безбедну и ефикасну употребу.
Преview Упутство за употребу дигиталног контролера Shinko ACS2
Детаљно упутство за употребу за Shinko ACS2 дигитални индикаторски контролер, које обухвата инсталацију, ожичење, рад, подешавања и решавање проблема за индустријске примене контроле температуре.