Monoprice 4-Channel Speaker Selector (Model 109995) User Manual

1. Производ је готовview

The Monoprice 4-Channel Speaker Selector allows you to connect a single stereo amplifier or receiver to up to four pairs of stereo speakers. This device enables you to distribute audio signals to different "zones" within your home, providing flexibility in your home audio setup. It includes an optional impedance protection circuit to maintain a stable load for your amplifier, regardless of the number of speakers in use.

2. Важне информације о безбедности

• Пре употребе пажљиво прочитајте ова упутства.
• Сачувајте ово упутство за будућу употребу.
• Не излажите овај уређај води или влази.
• Ensure all connections are secure before powering on your audio system.
• Do not exceed the maximum power rating of 140 watts per channel (without protection) or 70 watts per channel (with protection).
• Always disconnect power from your amplifier/receiver before making or changing any speaker connections.
• Do not attempt to open or service the unit. Refer all servicing to qualified personnel.

3. Садржај пакета

Please ensure all items are present upon unpacking:

• 1x Monoprice 4-Channel Speaker Selector Unit
• 1x Упутство за употребу (овај документ)

Слика 1: Packaging box for the Monoprice 4-Channel Speaker Selector. The box displays the product name and an image of the selector unit.

4. Карактеристике производа

• Connects one stereo amplifier/receiver to up to four pairs of stereo speakers.
• Supports up to 70 watts per channel with impedance protection enabled.
• Supports up to 140 watts per channel without impedance protection.
• Optional impedance protection circuit ensures a stable load for your ampлифиер.
• Individual on/off buttons for each speaker zone.
• Spring-loaded push terminals for easy speaker wire connection.

5. Подешавање и инсталација

Follow these steps to connect your Monoprice 4-Channel Speaker Selector to your audio system.

5.1 Identify Connections

Слика 2: Rear panel of the speaker selector. Note the "L INPUTS R" terminals on the left for amplifier connection and "OUTPUTS" terminals (1-4) for speaker connections.

The rear panel of the speaker selector features one set of stereo inputs labeled "L INPUTS R" for connecting your amplifier or receiver, and four sets of stereo outputs labeled "OUTPUTS 1" through "OUTPUTS 4" for connecting your speaker pairs.

5.2 Упутства за ожичење

1. Искључивање: Осигурајте своје amplifier/receiver is turned off and unplugged from the power outlet before making any connections.
2. Prepare Speaker Wires: Strip approximately 1/2 inch (1.25 cm) of insulation from the ends of all speaker wires. Twist the bare wire strands tightly.
3. Повежите се Amplifier to Inputs:
   • Повежите лево (+) output terminal of your ampдизалица до лево (+) input terminal of the speaker selector (under "L INPUTS R").
   • Повежите лево (-) output terminal of your ampдизалица до лево (-) input terminal of the speaker selector.
   • Повежите десно (+) output terminal of your ampдизалица до десно (+) input terminal of the speaker selector.
   • Повежите Јел тако (-) output terminal of your ampдизалица до Јел тако (-) input terminal of the speaker selector.

   Обезбедите исправан поларитет (+ на + и - на -) за оптималан квалитет звука.

4. Connect Speakers to Outputs: For each pair of speakers (Zone 1, 2, 3, or 4):
   • Повежите лево (+) terminal of your speaker to the лево (+) output terminal for the desired zone on the speaker selector.
   • Повежите лево (-) terminal of your speaker to the лево (-) output terminal for the desired zone on the speaker selector.
   • Повежите десно (+) terminal of your speaker to the десно (+) output terminal for the desired zone on the speaker selector.
   • Повежите Јел тако (-) terminal of your speaker to the Јел тако (-) output terminal for the desired zone on the speaker selector.

   Maintain consistent polarity for all speaker connections.

5. Impedance Protection Switch: Locate the impedance protection switch (often on the rear or bottom of the unit).
   • НА: Activates the protection circuit. Recommended for amplifiers with minimum impedance ratings below 8 ohms, or when connecting multiple pairs of speakers simultaneously to prevent amplifier overload. This limits power handling to 70W per channel.
   • ВАН: Disables the protection circuit. Allows for higher power handling (up to 140W per channel) but requires careful consideration of your amplifier's minimum impedance rating and the total impedance of connected speakers. Consult your amplifier's manual.
6. Пласман: Place the speaker selector in a well-ventilated area, away from heat sources and direct sunlight.

Слика 3: Англед view of the speaker selector, highlighting the front panel with individual speaker zone selection buttons and the rear input/output terminals.

6. Упутство за употребу

Once all connections are made and verified, you can begin using your speaker selector.

1. Укључено: Укључите и укључите свој ampлифиер/рецеивер.
2. Select Speaker Zones: Use the individual push-buttons on the front panel of the speaker selector to turn on or off each pair of connected speakers (Zone 1, 2, 3, or 4).
   • Pressing a button will engage that speaker zone.
   • Pressing it again will disengage the zone.
   • You can select one, multiple, or all speaker zones simultaneously, depending on your listening preference and amplifier capabilities.
3. Подесите јачину звука: Control the overall volume using your amplifier/receiver's volume control.

Note on Impedance Protection: If the impedance protection circuit is enabled, you can safely operate multiple pairs of speakers without concern for amplifier overload. If it is disabled, be mindful of your amplifier's minimum impedance rating when engaging multiple speaker pairs. Operating an amplifier below its minimum impedance rating can cause damage.

7. Одржавање

The Monoprice 4-Channel Speaker Selector requires minimal maintenance.

• Чишћење: Користите меку, суву крпу да обришете спољашњост уређаја. Не користите течна средства за чишћење или аеросол спрејеве.
• вентилација: Уверите се да вентилациони отвори на уређају нису блокирани како бисте спречили прегревање.
• Везе: Periodically check all speaker wire connections to ensure they remain secure.

КСНУМКС. Решавање проблема

9. Спецификације

10. Гаранција и корисничка подршка

Монопрајс стоји иза својих производа. За информације о гаранцији, техничку подршку или упите у вези са корисничком услугом, посетите званичну веб страницу Монопрајса. website or contact their customer support team directly. Please have your product model number (109995) and purchase information ready when contacting support.

Званичник Монопрајса Webсајт: ввв.моноприце.цом