1. Увод
This instruction manual provides essential information for the proper installation, operation, and maintenance of your GROHE 28947000 Rough Plumbing Pipe-Fittings. Please read this manual thoroughly before beginning installation to ensure correct setup and to prevent damage or injury. Keep this manual for future reference.
For more information about GROHE products, please visit the official GROHE продавница.
2. Безбедносне информације
Always observe basic safety precautions when installing or maintaining plumbing fixtures. Failure to follow these instructions could result in property damage or personal injury.
- Ensure the main water supply is turned off before starting any installation work.
- Носите одговарајућу личну заштитну опрему, као што су заштитне наочаре и рукавице.
- Ако нисте сигурни у вези са било којим делом процеса инсталације, консултујте квалификованог водоинсталатера.
- Do not use excessive force when tightening connections to avoid damaging components.
- Држите мале делове даље од деце.
3. Садржај пакета
Пре почетка инсталације проверите да ли су све компоненте присутне и неоштећене. Пакет треба да садржи:
- 1 x GROHE 28947000 Basin U-Bend (Odour trap)
- Associated seals and connection components
Image 1: GROHE 28947000 Rough Plumbing Pipe-Fitting. This image shows the main component of the pipe fitting, a basin U-bend, in a Starlight Chrome finish.
4. Подешавање и инсталација
This GROHE pipe fitting is designed to be compatible with all GROHE washbasins. Follow these general steps for installation. Specific basin configurations may require slight adjustments.
Потребни алати (нису укључени):
- Подесиви кључ или кључ за цеви
- Plumber's tape (PTFE tape)
- Bucket or towel for catching residual water
Кораци инсталације:
- Припремите простор: Turn off the water supply to the basin. Place a bucket or towels under the existing drain to catch any water.
- Remove Old Fitting (if applicable): Carefully disconnect and remove the old pipe fitting. Clean the drain opening and connecting pipes thoroughly.
- Assemble the U-Bend: Apply plumber's tape to threaded connections if recommended by local plumbing codes or if a tighter seal is desired. Connect the U-bend components according to the radial style design, ensuring all seals are correctly seated.
- Connect to Basin Одвод: Attach the top section of the U-bend to the basin's drain tailpiece. Hand-tighten first, then use a wrench for a snug fit, being careful not to overtighten.
- Повезивање са зидним одводом: Connect the horizontal outlet of the U-bend to the wall drain pipe. Ensure a proper seal with the provided washers or gaskets.
- Проверите поравнање: Verify that the entire assembly is properly aligned and level to ensure efficient drainage.
- Тест за цурење: Slowly turn on the water supply and check all connections for leaks. Run water through the basin for several minutes, observing closely. Tighten any leaking connections slightly until the leak stops.
5. Оперативни
Once installed, the GROHE 28947000 pipe fitting operates passively as part of your basin's drainage system. Its primary function is to create a water seal (U-bend) that prevents sewer gases from entering your living space while allowing wastewater to drain freely.
- Ensure water flows smoothly down the drain without gurgling or backing up.
- Periodically check for any signs of leakage around the connections.
6. Одржавање
Regular maintenance will help prolong the life and maintain the appearance of your GROHE pipe fitting.
- Чишћење: Wipe the Starlight Chrome finish with a soft, dry cloth. Avoid abrasive cleaners, scouring pads, or chemical agents that can damage the chrome plating.
- инспекција: Periodically inspect the pipe fitting for any signs of corrosion, loose connections, or leaks. Address any issues promptly.
- Уклањање блокада: If a blockage occurs, the U-bend can typically be unscrewed from the bottom for cleaning. Place a bucket underneath before opening to catch water and debris.
КСНУМКС. Решавање проблема
If you encounter issues with your GROHE pipe fitting, refer to the following common problems and solutions:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Цурење на прикључцима | Loose connections, damaged seals, incorrect installation of plumber's tape. | Tighten connections carefully. Inspect and replace damaged seals. Reapply plumber's tape if necessary. |
| Slow drainage or blockage | Accumulation of hair, soap scum, or debris in the U-bend or drain pipe. | Turn off water supply. Place a bucket under the U-bend. Unscrew the bottom of the U-bend to clear debris. Reassemble and test. |
| Sewer gas odor | U-bend is dry (water seal evaporated), or improper seal at connections. | Пустите воду у бasin to refill the U-bend. Check all connections for leaks and ensure they are tight. |
8. Спецификације
| Бранд | ГРОХЕ |
| Број модела | 28947000 |
| Материјал | нерђајући челик |
| Боја | GROHE CHROME (Starlight Chrome) |
| Стиле | Odour trap (Basin U-Bend), Radial |
| Врсте завршетка | Полирано |
| Димензије производа (Д x Ш x В) | 11.2 цм Д x 20.2 цм Ш x 7.4 цм В |
| Тежина артикла | 0.34 килограма |
| Врста инсталације | Ундермоунт |
| Драин Типе | Pop-Up (refers to compatible drain type, not the fitting itself) |
| Компатибилност | Fits all GROHE washbasins |
9. Гаранција и подршка
GROHE products are manufactured to the highest quality standards and are backed by a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or visit the official GROHE webсајту.
If you require technical assistance, have questions about installation, or need to report a defect, please contact GROHE customer support. Contact information can typically be found on the GROHE webсајту или на вашем рачуну о куповини.
Подршка на мрежи: Visit the GROHE Store on Amazon
