Увод
The Lithonia Lighting FMLWL LED linear wraparound fixture is designed to provide bright, even illumination. This low-maintenance fixture delivers 1,200 lumens of 4000K cool white light with a long-lasting LED engine, ensuring up to 50,000 hours of energy-efficient performance. Its durable construction features a sturdy metal housing with decorative plastic end caps and a white polycarbonate diffuser that distributes light evenly while reducing glare. This fixture is suitable for various indoor applications including hallways, offices, closets, utility areas, bathrooms, and kitchens.
This version is non-dimming.
Безбедносне информације
УПОЗОРЕЊЕ: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Прочитајте сва упутства пре инсталације.
- Уверите се да је залиха волtage is correct (120V).
- Немојте правити нити мењати никакве отворене рупе у кућишту ожичења или електричних компоненти током инсталације комплета.
- Да бисте спречили оштећење ожичења или хабање, не излажите жице ивицама лима или другим оштрим предметима.
- Погодно за дamp локацијама.
Садржај пакета
Verify that all parts are included before beginning installation.
- Lithonia Lighting FMLWL LED Wraparound Fixture (Model FMLWL 24 840)
- Упутство за употребу
- Прибор за монтажу (шрафови, навртке за жицу)
Спецификације
| Феатуре | Спецификација |
|---|---|
| Бранд | Литхониа Лигхтинг |
| Број модела | FMLWL 24 840 |
| Величина | 24-Inch (24.45"L x 5.48"W x 2.5"H) |
| Температура боје | 4000К Цоол Вхите |
| Осветљеност | 1200 Lumens (rated for 70% output for 50,000 hours) |
| Волtage | 120 Волтс |
| Ватtage | 12 вати |
| Материјал | Alloy Steel, Polycarbonate Shade |
| Врста инсталације | Flush Mount (Ceiling or Wall) |
| Унутрашња/спољна употреба | Унутрашњи (Дamp Оцена локације) |
| Посебне карактеристике | Easy to Install, Non-dimming |
| Цертификати | UL and CSA listed, DLC |
Инсталација
This fixture is designed for easy surface-mount installation on ceilings or walls. Always ensure power is disconnected before starting installation.
Кораци инсталације:
- Припремите прибор: Remove fixture components and parts pack. Check that all parts are included. Carefully remove the diffuser from the housing.
- Access Wiring: Remove the wireway cover by removing two screws securing the cover to the fixture housing. Locate the black supply wire, the white neutral wire, and the green grounding wire. Push all three wires out the back of the fixture through the coined hole.
- уземљење: Hold the fixture housing firmly and connect the green ground wire from the fixture to the bare copper ground wire from the junction box using a wirenut.
- Електричне везе: Use wirenuts to connect the black fixture wire to the black supply wire and the white (neutral) fixture wire to the white supply wire.
- Монтажа: Align keyholes on the back of the fixture housing with screws previously installed in the junction box. Lift the fixture up, rotate clockwise, and tighten screws to secure the housing assembly against the ceiling.
- Поново саставите: Starting at one end of the housing, insert the diffuser slot onto the edge of the housing. Carefully squeeze the diffuser to engage the opposite side with the housing. Continue this action down the length of the diffuser until fully installed onto the housing.
Visual Aid:
Опис видеа: This video provides a detailed product overview and installation guide for the FMLWL LED Wraparound Light. It visually demonstrates how to disassemble the fixture, connect the wiring, mount it to the ceiling, and reattach the diffuser, including steps for selecting color temperature and lumen output.
Слике производа:
Упутство за употребу
The Lithonia Lighting FMLWL 24 840 is a non-dimmable fixture. It operates by a standard wall switch connected to the electrical circuit. Simply toggle the wall switch to turn the light fixture ON or OFF.
Одржавање
This LED fixture is designed for low maintenance. To ensure optimal performance and appearance:
- Чишћење: Disconnect power before cleaning. Wipe the exterior of the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or diffuser.
- LED Engine: The integrated LED engine is designed for long life and does not require bulb replacement.
Решавање проблема
If the fixture does not operate correctly, refer to the following:
- Без светла:
- Check that power is supplied to the fixture at the circuit breaker.
- Уверите се да су све жице безбедне.
- Трепереће светло:
- Verify that the fixture is not connected to a dimmer switch, as this model is non-dimmable.
- Проверите да ли постоје лабаве везе ожичења.
Ако проблеми и даље постоје, консултујте квалификованог електричара.
Гаранција и подршка
This Lithonia Lighting FMLWL LED fixture is backed by a 5-годишња ограничена гаранција. For warranty claims or technical support, please refer to the contact information provided with your purchase documentation or visit the official Lithonia Lighting webсајту.
