Упутство за употребу бежичне метеоролошке станице Ambient Weather WS-12

1. Увод

The Ambient Weather WS-12 Wireless Weather Station provides comprehensive weather monitoring with a color-changing display. This manual details the setup, operation, and maintenance of your weather station to ensure optimal performance and longevity.

The system includes a main display console and distributed wireless sensors for outdoor temperature, humidity, wind speed, wind direction, and rainfall. The console features a customizable backlight that changes color based on temperature or can be set manually. It displays current weather conditions, historical data, moon phase, and allows for setting various alarms.

2. Садржај пакета

• Дисплаи Цонсоле
• Wireless Thermo-Hygrometer Sensor
• Сензор за мерење кише
• Anemometer (Wind Speed and Direction Sensor) with Solar Panel
• Mounting Hardware for Sensors

Figure 2.1: Main components of the WS-12 Weather Station. Shown are the display console, the wireless thermo-hygrometer, the rain gauge, and the anemometer with its integrated solar panel.

3. Водич за подешавање

3.1 Инсталација батерије

Batteries are not included and must be purchased separately. Ensure correct polarity during installation.

• Дисплаи Цонсоле: Requires 4 x AA batteries.
• Wireless Thermo-Hygrometer: Захтева 2 к ААА батерије.
• Rain Gauge Sensor: Захтева 4 к ААА батерије.
• Анемометар: Requires 4 x AAA batteries. The anemometer also features a solar panel for extended battery life.

Напомена: Install batteries in the outdoor sensors first, then in the display console to ensure proper synchronization.

3.2 Постављање сензора

Optimal sensor placement is crucial for accurate readings.

• Thermo-Hygrometer: Place in a shaded area, away from direct sunlight and heat sources, to measure ambient air temperature and humidity accurately. Ensure it is protected from direct rain.
• Мерење количине падавина: Install on a level surface, away from obstructions like trees or buildings that could block rainfall. Ensure easy access for periodic cleaning.
• Анемометар: Mount in an open area, as high as possible, to minimize interference from buildings or trees. The solar panel should face south for maximum sun exposure.

Figure 3.1: The WS-12 display console, illustrating the clear presentation of wind speed, direction, temperature, humidity, rainfall, barometric pressure, and time.

3.3 Почетна синхронизација

1. After installing batteries in all sensors and the console, power on the display console.
2. The console will automatically begin searching for the wireless sensors. This process may take several minutes.
3. Once connected, the outdoor temperature, humidity, wind, and rain data will appear on the display. If data does not appear, refer to the Troubleshooting section.

4. Операција

4.1 Display Console Overview

The display console presents various weather parameters and settings. Key areas include:

• Време и датум: Displays current time and calendar date.
• Температура и влажност у затвореном/спољашњем простору: Shows current readings.
• Wind Speed & Direction: Provides current wind data.
• падавине: Accumulates rainfall data.
• Притисак на барометру: Displays current atmospheric pressure.
• Dew Point & Feels Like Temperature: Calculated values for comfort indication.
• Месечева фаза: Означава тренутну лунарну фазу.

4.2 Функције дугмета

The console typically features buttons for navigation and settings:

• МИН / МАКС: View minimum and maximum recorded values for various parameters.
• КОМПЛЕТ: Enter setup mode for time, date, units, and other settings.
• АЛАРМНИ: Set time alarms or weather condition alarms (e.g., high/low temperature alerts).
• CHANNEL (+): Switch between different sensor channels if additional sensors are connected, or adjust values during setup.

4.3 Customizing the Display

• Боја позадинског осветљења: The backlight color can change automatically based on outdoor temperature or be manually adjusted through the settings menu. Refer to the console's specific settings for detailed instructions.
• Јединице: Temperature (Celsius/Fahrenheit), wind speed (mph, km/h, m/s), and rainfall (inches/mm) units can be configured in the setup menu.
• калибрација: The console allows for calibration of certain parameters to match local conditions or other reference instruments. This feature is accessed via the SET menu.

5. Одржавање

• Замена батерије: Replace batteries in all sensors and the display console annually, or when low battery indicators appear. Use high-quality alkaline batteries.
• Чишћење сензора:
  • Мерење количине падавина: Periodically check and clean the rain gauge funnel and tipping bucket mechanism to prevent debris (leaves, insects) from obstructing accurate rainfall measurement.
  • Анемометар: Ensure the wind cups and wind vane rotate freely. Remove any obstructions. The solar panel should be kept clean for efficient charging.
  • Thermo-Hygrometer: Keep the sensor housing free of dust and spiderwebs.
• Ажурирања фирмвера: Check the Ambient Weather webсајт за сва доступна ажурирања фирмвера за ваш модел.

КСНУМКС. Решавање проблема

7. Спецификације

8. Гаранција и подршка

For warranty information and technical support, please refer to the official Ambient Weather webсајт или директно контактирајте њихову корисничку службу. Сачувајте рачун за куповину за потребе гаранције.

Онлине ресурси: ввв.амбиентвеатхер.цом