Acoustic Audio by Goldwood HD-800 In-Wall Speaker System Instruction Manual

1. Увод

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Acoustic Audio by Goldwood HD-800 In-Wall Speaker System. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.

The HD-800 speakers are designed for flush-mount installation in walls, offering wide sound dispersion and seamless integration into home audio systems.

Image 1.1: Acoustic Audio HD-800 In-Wall Speaker System (4 Pair Pack).

Шта је у кутији:

• 8 Flush Mount Passive Speakers with Removable Grilles
• Cut-Out Templates
• Упутство за употребу (овај документ)

2. Безбедносне информације

Please observe the following safety precautions to prevent damage to the speakers or injury to yourself:

• Прочитајте сва упутства: Before installation and use, read and understand all safety and operating instructions.
• Сачувајте упутства: Сачувајте ово упутство за будућу употребу.
• Обратите пажњу на упозорења: Придржавајте се свих упозорења на производу иу упутству за употребу.
• Инсталација: Ensure proper installation by a qualified professional if you are unsure about electrical wiring or structural integrity.
• Снага: Do not exceed the recommended power handling of 350 watts per channel. Overpowering can damage the speakers.
• Ожичење: Use only CL3 rated in-wall speaker wire for permanent installations to comply with building codes and safety standards.
• Влага: Do not expose speakers to moisture or extreme temperatures.
• Чишћење: Искључите струју пре чишћења. Користите само суву крпу.
• Сервисирање: Не покушавајте сами да сервисирате овај производ. Све сервисирање препустите квалификованом сервисном особљу.

3. Подешавање и инсталација

3.1 Планирање инсталације

Careful planning is essential for optimal sound performance and ease of installation. Consider the following:

• Положај звучника: For home theater surround sound, refer to standard speaker placement guidelines (e.g., Dolby Atmos, DTS:X) for optimal imaging and immersion. For whole-house audio, consider even distribution for consistent sound levels.
• Структура зида: Ensure the chosen wall locations are free of electrical wiring, plumbing, and structural elements (studs, joists). Use a stud finder and inspect the area thoroughly.
• Путање ожичења: Plan the route for your speaker wires from your amplifier/receiver to each speaker location. Ensure wires can be run safely and discreetly within the wall.

3.2 Потребан алат

• Оловка
• Тапе Меасуре
• Студ Финдер
• Услужни нож или тестера за суви зид
• Скидачи жице
• Одвијач (Пхиллипс глава)
• CL3 Rated Speaker Wire

3.3 Кораци инсталације

1. Припремите отварање:

   Using the provided cutout template, carefully trace the outline onto the desired wall location. Ensure the area is clear of obstructions. Use a utility knife or drywall saw to cut along the traced line. The required rectangular speaker hole size is 8.75 inches x 12.66 inches (22.2 cm x 32.2 cm).

   

   Image 3.1: Cutout Template and Instruction Manual.

2. Проводите жицу звучника:

   Route CL3 rated speaker wire from your amplifier/receiver to the cutout opening. Leave enough slack to comfortably connect to the speaker terminals. Strip approximately 1/2 inch of insulation from the ends of the speaker wire.

3. Повежите жице звучника:

   Connect the stripped speaker wires to the spring-loaded raw wire connections on the back of the speaker. Ensure correct polarity: positive (+) to positive (+) and negative (-) to negative (-). Incorrect polarity will result in poor sound quality.

   

   Слика 3.2: Позади view of HD-800 speaker with wiring terminals.

4. Монтирајте звучник:

   Carefully insert the speaker into the wall cutout. The HD-800 features a unique Pressure Lock Mounting System. Tighten the screws located on the front baffle of the speaker. As you tighten, the mounting clamps will pivot outwards and secure the speaker firmly to the drywall. Do not overtighten.

   

   Слика 3.3: Предња страна view of HD-800 speaker (grille removed).
5. Причврстите решетку:

   Once the speaker is securely mounted, attach the removable grille. The grille is designed to fit snugly over the speaker frame. It can be painted to match your decor if desired.

Image 3.4: HD-800 Speaker Dimensions.

4. Операција

Once your HD-800 speakers are installed and wired, they are ready for use with your home audio receiver or ampлифиер.

• Захтеви за напајање: Ensure your receiver or amplifier provides power within the recommended range of 10 to 350 watts per channel.
• Подешавање пријемника: Обратите се свом amplifier or receiver's manual for instructions on configuring speaker settings, such as speaker size (typically "Large" for full-range speakers), crossover frequencies (if applicable), and channel levels.
• Подешавање звука: Adjust volume and tone controls on your receiver/amplifier to achieve your desired sound balance. The pivoting titanium tweeters allow for directional adjustment of high frequencies after installation to optimize sound for your listening area.

5. Одржавање

The Acoustic Audio HD-800 speakers require minimal maintenance to ensure long-lasting performance.

• Чишћење: Gently wipe the speaker grilles and frames with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
• Уклањање решетке: If necessary, the grilles can be carefully removed for cleaning or painting. Use a small, flat tool to gently pry the grille from the frame edges.
• Услови животне средине: Avoid exposing the speakers to extreme humidity, direct sunlight, or heat sources, which can degrade materials over time.

КСНУМКС. Решавање проблема

If you experience issues with your HD-800 speakers, consult the table below for common problems and solutions.

If the problem persists after trying these solutions, please contact Acoustic Audio by Goldwood customer support.

7. Спецификације

8. Гаранција и подршка

Acoustic Audio by Goldwood products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Acoustic Audio by Goldwood webсајту.

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact our customer support team:

• Webсајт: ввв.голдвоод.цом (or refer to your product packaging for the most current contact information)
• Емаил: Погледајте webсајт за контакт формулар или адресу е-поште.
• Телефон: Погледајте webсајт за телефонску подршку.

Please have your model number (HD-800) and proof of purchase ready when contacting support.