Производ је завршенview
The Alpine Hemlock Hand Dryer is a heavy-duty, high-speed commercial hand dryer designed for efficient and hygienic hand drying. Constructed from durable stainless steel, it offers quick drying times and is suitable for various commercial and public restroom environments. This manual provides essential information for the safe and proper installation, operation, and maintenance of your hand dryer.
Слика: Фронт view of the Alpine Hemlock Hand Dryer, highlighting its heavy-duty design and compliance.
Кључне карактеристике
- Брзо сушење: Dries hands in approximately 8-10 seconds.
- Моћне перформансе: Features a motor speed of 22,000 RPM and a wind speed of 200 MPH.
- Подесива топлота: Provides heated air between 45-65°C.
- Аутоматски рад: Equipped with an automatic motion sensor with a sensing distance of 5 +/- 1 inch.
- Издржљива конструкција: Made from heavy-duty, corrosion-proof stainless steel for long-lasting use.
- Енергетски ефикасан: Designed to be cost-efficient, offering up to 95% savings compared to paper towels.
- Флексибилна инсталација: Supports both simple plug-in and hard-wired power options.
- Безбедност и усклађеност: UL Listed and ADA Compliant.
Image: Visual representation of the hand dryer's motor speed, wind speed, and heat settings.
Image: Diagram showing the cost efficiency of the hand dryer versus paper towel usage.
Инсталација
Садржај пакета
Пре почетка инсталације проверите да ли су све компоненте присутне:
- Alpine Hemlock Hand Dryer Unit
- Монтажни завртњи
- Зидна сидра
- Васхерс
- Аллен кључ
Image: Hand dryer dimensions and a visual of the included mounting hardware.
Упутства за монтажу
- Изаберите локацију: Choose a suitable wall location, ensuring adequate space around the unit for proper operation and maintenance. Consider ADA compliance guidelines for height and clearance.
- Означите тачке бушења: Use the mounting template (if provided, or measure according to the unit's backplate) to mark the drilling points on the wall.
- Избушене рупе: Drill pilot holes at the marked locations. Insert wall anchors if mounting into drywall or hollow surfaces.
- Сигурна монтажна плоча: Attach the hand dryer's mounting plate (if separate) to the wall using the provided screws and washers.
- Електрични прикључак:
- Опција додатка: If using the plug-in option, ensure a compatible 110-120V outlet is available near the installation site.
- Hard-Wired Option: For hard-wired installations, it is recommended to consult a qualified electrician. Ensure power is disconnected at the circuit breaker before making any electrical connections. Connect the hand dryer's wiring to the building's electrical supply according to local electrical codes.
- Attach Hand Dryer: Carefully align the hand dryer unit with the mounting plate and secure it using the remaining screws or locking mechanism.
- Пробни рад: Restore power and test the hand dryer to ensure it functions correctly.
Image: Illustration of the two available power options: simple plug-in and hard-wired.
Операција
The Alpine Hemlock Hand Dryer operates automatically using an infrared motion sensor.
- Активирај: Place your hands directly under the air outlet. The sensor will detect your hands and activate the air blower. A blue light will illuminate to indicate operation.
- Суве руке: Move your hands slowly back and forth under the airflow to ensure even drying. The powerful air stream and heated air will dry your hands quickly.
- Деактивирај: Remove your hands from the sensor's range. The hand dryer will automatically shut off after a few seconds.
Image: Diagram illustrating the optimal hand placement and sensing distance for automatic operation.
Одржавање
Regular maintenance ensures optimal performance and longevity of your hand dryer.
- Спољно чишћење: Обришите спољашњост од нерђајућег челика меком крпомamp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads that could scratch the finish.
- Решетка за усис ваздуха: Periodically check the air inlet grille for dust or lint accumulation. Clean with a soft brush or vacuum cleaner to maintain proper airflow.
- Чишћење сензора: Ensure the motion sensor lens is clean and free from obstructions. Wipe gently with a soft cloth.
- инспекција: Regularly inspect the power cord (if plug-in) and mounting for any signs of damage or loosening.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Hand dryer does not activate. | No power supply; Sensor obstructed or dirty; Hands not within sensing range. | Check power connection/circuit breaker; Clean sensor; Place hands within 5 +/- 1 inch of outlet. |
| Weak airflow or slow drying. | Air inlet grille obstructed; Motor issue. | Clean air inlet grille; Contact customer support if problem persists. |
| Hand dryer runs continuously. | Sensor malfunction; Obstruction in sensor path. | Remove any obstructions; Clean sensor; Contact customer support. |
Спецификације
- Модел: B01M0QQ9Z2
- Димензије (В к Ш к Д): 12.31 ин к 11.40 ин к 6.68 ин
- Тежина: 10.96 фунти (4.97 кг)
- Електричне спецификације: 110-120 Volts, 50/60 Hz
- Power Consumption (Heating Element ON): 1240-1800 Watts (15 Amps)
- Power Consumption (Heating Element OFF): 700 вата (5.8 Amps)
- Брзина мотора: 22,000 РПМ
- Брзина ветра: 200 МПХ
- Температура ваздуха: 45-65°Ц
- Време сушења: 8-10 секунди
- Материјал: Heavy-Duty Stainless Steel
- Сертификати: UL Listed, ADA Compliant
Гаранција и подршка
The Alpine Hemlock Hand Dryer comes with a 5-годишња ограничена гаранција. This warranty covers defects in materials and workmanship under normal use and service. For warranty claims, technical support, or any inquiries, please contact Alpine Industries customer service.
Молимо вас да сачувате доказ о куповини ради потврде гаранције.
Image: Visual representation of the 5-year limited warranty coverage.
