Baby Brezza BZB00177

Упутство за употребу за замену цуцле за флашицу за бебе Baby Brezza

Model: BZB00177 | Brand: Baby Brezza

Увод

This manual provides essential information for the proper use, care, and maintenance of your Baby Brezza Baby Bottle Replacement Nipples. These nipples are designed to mimic natural breastfeeding, promoting healthy oral development and easing transitions from breast to bottle. Each nipple features an integrated nipple and collar for simplified cleaning and assembly.

Two Baby Brezza replacement nipples with grey bases

This image displays two Baby Brezza replacement nipples, featuring a clear silicone nipple and a grey, textured base. These nipples are designed for use with Baby Brezza bottles.

Карактеристике производа

Diagram illustrating Baby Brezza breast-like nipple design and 140-degree feeding angle

This diagram shows a Baby Brezza bottle and nipple in use, illustrating the breast-like nipple design and the recommended 140-degree feeding angle to promote natural latching and comfortable feeding.

Diagram showing air and milk flow through Baby Brezza anti-colic TruFlo vent system

This image illustrates the internal mechanism of the Baby Brezza nipple's Anti-colic TruFlo Vent System, clearly showing the separate pathways for air intake and milk flow to minimize gas and discomfort during feeding.

Подешавање и монтажа

  1. Прегледајте: Before first use, and before each subsequent use, inspect the nipple for any tears, cracks, or signs of wear. Discard and replace if damaged.
  2. чисто: Thoroughly clean the nipple as per the 'Cleaning and Maintenance' section before first use and after each use.
  3. саставити: The Baby Brezza nipple features an integrated collar. Simply align the nipple with the bottle opening and twist the collar clockwise until securely fastened. Ensure the nipple is seated correctly and no gaps are present to prevent leaks.
  4. Компатибилност: These replacement nipples are designed specifically for Baby Brezza Polypropylene and Glass Bottles. Ensure you are using them with compatible bottles for optimal performance and safety.

Употреба и рад

The Baby Brezza Slow Flow Nipple (Stage 1) is designed for newborns and infants aged 0 months and older. It provides a controlled, steady flow of liquid, mimicking the natural pace of breastfeeding.

Чишћење и одржавање

Proper cleaning and maintenance are crucial for hygiene and longevity of the nipples. The integrated nipple and collar design simplifies the cleaning process.

  1. Растављање: Separate the nipple from the bottle. No further disassembly is required as the nipple and collar are one piece.
  2. прање: Wash immediately after each use. Hand wash with warm, soapy water and rinse thoroughly. Use a nipple brush to ensure all milk residue is removed from inside the nipple and the vent.
  3. Може се прати у машини за судове: The nipples are top-rack dishwasher safe. Place them securely in the top rack to prevent them from falling to the bottom.
  4. стерилизација: For sterilization, you can boil the nipples in water for 5 minutes, use a steam sterilizer, or a microwave sterilizer according to the sterilizer's instructions.
  5. Сушење: Allow nipples to air dry completely on a clean drying rack. Store in a clean, dry place away from direct sunlight or heat.

Решавање проблема

ПроблемМогући узрокРешење
Брадавица се урушава током храњења.Blocked or non-functional anti-colic vent. Baby sucking too hard for the flow rate.Ensure the TruFlo vent is clear and not sealed shut. Check for milk residue or blockages. If the problem persists, consider if a faster flow nipple (higher stage) is needed for your baby's feeding strength.
Leaking around the nipple collar.Nipple not securely fastened to the bottle. Damaged nipple or bottle rim.Ensure the nipple is twisted tightly onto the bottle. Inspect the nipple and bottle rim for any cracks or damage. Replace if necessary.
Baby seems frustrated or takes a long time to feed.Flow rate is too slow for the baby's needs.The provided nipples are Slow Flow (Stage 1). As your baby grows, they may require a faster flow nipple. Consult your pediatrician to determine if a higher stage nipple is appropriate.

Спецификације

АтрибутДетаљ
Димензије производа3 к 3 к 2.5 инча
Број модела ставкеБЗБ00177
Врста материјалаполипропилен (ПП)
Material FreeBisphenol A Free (BPA Free)
Број ставки2 Цоунт (Паковање од 1)
Тежина артикла2.39 унци
Тип цуцле за флашицуAnti-colic TruFlo Vent System
Liquid Flow Speed DescriptionSlow Flow (Stagе 1)

Информације о гаранцији

Baby Brezza products are manufactured to high-quality standards. For specific warranty details regarding your replacement nipples or other Baby Brezza products, please refer to the official Baby Brezza webсајт или директно контактирајте њихову корисничку подршку. Сачувајте доказ о куповини за евентуалне рекламације по гаранцији.

Корисничка подршка

If you have any questions, concerns, or require assistance with your Baby Brezza Baby Bottle Replacement Nipples, please contact Baby Brezza customer support. Visit the official Baby Brezza webсајт за контакт информације, честа питања и додатне ресурсе о производу.