1. Увод
This manual provides detailed instructions for the operation and maintenance of the SATLINK WS-6980 DVB-S2/C/T2 Combo Digital Satellite Finder Meter. The WS-6980 is a versatile handheld device designed for the installation and verification of digital satellite, terrestrial, and cable television signals. It features a 7-inch high-definition TFT LCD screen, DVB-S/S2, DVB-T/T2, and DVB-C compatibility, and includes advanced analysis tools such as a constellation analyzer and spectrum analyzer.
2. Безбедносне информације
- Не излажите уређај киши или влази.
- Avoid extreme temperatures. Operate and store the device within recommended environmental conditions.
- Use only the provided power adapter and car charger cable.
- Не покушавајте сами да отворите или поправите уређај. Све сервисирање препустите квалификованом особљу.
- Обезбедите одговарајућу вентилацију током рада како бисте спречили прегревање.
3. Производ је готовview
The SATLINK WS-6980 is equipped with a robust set of features for signal analysis. Below are key components and an overview of the main menu interface.
Слика 3.1: Фронт view of the SATLINK WS-6980 displaying the main menu. The screen shows icons for various functions including DVB-S/S2, DVB-T/T2, DVB-C, Spectrum analysis, Loop Search, Other tools, Multimedia, and System Settings. A keypad and navigation buttons are visible on the right.
Слика 3.2: Позади view of the SATLINK WS-6980, illustrating the connectivity ports. These include HDMI IN/OUT, DC IN, and various antenna/LNB connections.
4. Подешавање
4.1 Почетно пуњење
Before first use, fully charge the device's internal 7.4V/5000mAh Li-ion battery using the provided 12V power charger. The charging indicator light will show the charging status.
4.2 Укључивање/искључивање
Press and hold the power button located on the device to turn it on or off. The device will display the main menu upon startup.
4.3 Основне везе
- Satellite (DVB-S/S2): Connect the LNB cable from your satellite dish to the F-type connector labeled 'LNB IN'.
- Terrestrial/Cable (DVB-T/T2/C): Connect your antenna or cable signal to the female type connector labeled 'ANT IN' or 'CABLE IN'.
- AV/HDMI: Use the AV IN/OUT or HDMI IN/OUT ports for connecting to external displays or receiving video input.
5. Упутство за употребу
5.1 Навигација по главном менију
Use the directional buttons and the 'OK' button to navigate through the main menu. The main menu provides access to all primary functions of the device.
Слика 5.1: The System Setting menu on the WS-6980, showing options for Country Setting, OSD Language, TV Format, Video Output, TV Resolution, Digital Audio Output, Time Zone, Channel Lock, and PWR Unit.
5.2 Satellite Signal Finding (DVB-S/S2)
- From the main menu, select 'DVB-S/S2'.
- Navigate to the 'Satellite Find' screen.
- Select the desired satellite from the list or manually enter parameters such as Local Frequency, Transponder, Frequency, Symbol Rate, and Polarity.
- Adjust DISEQC settings (1.0/1.1/1.2) and 0/22kHz Tone as required for your setup.
- The device will display signal strength and quality. Use the 'Auto Scan' or 'TP Scan' functions to find channels.
Слика 5.2: The Satellite Find menu on the WS-6980, allowing selection of satellite, local frequency, transponder, frequency, symbol rate, polarity, tone, beep tone, and DiSEqC mode.
Слика 5.3: Signal measurement screen on the WS-6980, showing power (PWR), carrier-to-noise ratio (CN), bit error rate (BER), and modulation error ratio (MER). It also includes an electronic compass for azimuth (AZ) and elevation (EL) angle calculation.
5.3 Terrestrial/Cable Signal Finding (DVB-T/T2/C)
Similar to satellite finding, select 'DVB-T/T2' or 'DVB-C' from the main menu. Configure the input frequency and other relevant parameters. The device supports auto and manual scanning for channels.
5.4 Constellation and Spectrum Analyzer
Access these advanced analysis tools from the main menu under 'Spectrum' or within the DVB-S/S2/C/T2 modes. These features provide visual representations of signal quality and interference, aiding in precise antenna alignment and troubleshooting.
5.5 Optical Power Detection
The device includes an optical power detection function. Connect the optical fiber to the designated port to measure optical signal strength.
5.6 Остале карактеристике
- Електронски компас: Automatically calculates Azimuth (AZ) and Elevation (EL) angles for satellite dish alignment.
- Лампа: Built-in flashlight for use in low-light conditions.
- ДЦ12В излаз: Provides 12V DC power output for external devices.
- LNB/ANT/DC12V Short Protect: Integrated protection against short circuits on LNB, antenna, and DC12V output ports.
6. Одржавање
6.1 Одржавање батерије
To prolong battery life, avoid fully discharging the battery frequently. Recharge the device regularly, especially if it will be stored for extended periods.
6.2 Чишћење
Clean the device with a soft, dry cloth. Do not use liquid cleaners or solvents. Keep the screen free of dust and smudges for optimal visibility.
6.3 Надоградња софтвера
The device's software can be upgraded via the USB port. Refer to the official SatLink webсајт за најновији фирмвер и упутства.
КСНУМКС. Решавање проблема
- Нема напајања: Ensure the battery is charged or the device is connected to the power adapter. Check the power button.
- Није откривен сигнал: Verify all cable connections are secure. Check LNB/antenna alignment and settings (frequency, symbol rate, polarity, DiSEqC). Ensure the correct DVB mode (S/S2, T/T2, C) is selected.
- Лош квалитет сигнала: Adjust antenna/dish alignment. Check for obstructions. Inspect cables and connectors for damage. Use the spectrum and constellation analyzers to identify interference.
- Проблеми са екраном: If the screen is unresponsive or displays incorrectly, try restarting the device. If the issue persists, contact support.
8. Спецификације
| Феатуре | Спецификација |
|---|---|
| Дисплаи | 7 Inch High Definition TFT LCD Screen (1024*600) |
| Усклађеност | Fully DVB-S/S2, T/T2/C, MPEG-2/MPEG-4 compliant |
| Видео Децодинг | MPEG-2/MPEG-4 H.264 Hardware decoding (8 Bit, does not support 10 Bit) |
| Satellite Input Frequency | 950 до 2150 МХз |
| Terrestrial/Cable Input Frequency | 48 до 862 МХз |
| ЛНБ Суппли | 13V/18V, Imax 400mA |
| АНТ Снабдевање | 5В, 12В/24В Имак 100мА |
| Demodulation Type (Satellite) | QPSK, 8PSK, 16APSK |
| Demodulation Type (Terrestrial/Cable) | КПСК, 16КАМ, 64КАМ, 256КАМ |
| Батерија | Ли-јонска батерија од 7.4 В/5000 мАх |
| Димензије (ШкДкВ) | 250 мм к 156 мм к 40 мм (9.85 к 6.14 к 1.57 инча) |
| Нето тежина | 1 кг (2.2 фунти) |
| Повезивање | USB (for software upgrade), AV IN/OUT, HDMI IN/OUT |
9. Садржај пакета
The following items are included with your SATLINK WS-6980:
- 1x WS-6980 DVB-S2/C/T2 Combo HD Satellite Finder Meter
- 1x 12V Car charger cable
- 1x 12V Power Charger
- 1к кофер за ношење
- 1x Neck Strap
- 1x AV cable
- 1к упутство за употребу (ЦД)
Слика 9.1: Visual representation of the accessories included with the WS-6980, such as charging cables, AV cables, carrying case, and various connectors.
10. Гаранција и подршка
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official SatLink webсајт. Сачувајте рачун као доказ о куповини за потребе гаранције.
