Einhell TE-TC 920 UL Radial Tile Cutter

1. Увод

This instruction manual provides essential information for the safe and efficient operation, setup, and maintenance of your Einhell TE-TC 920 UL Radial Tile Cutter. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage. Keep this manual in a safe place for future reference.

The Einhell TE-TC 920 UL is designed for precise cutting of wall tiles, floor tiles, and terracotta. Its robust construction and advanced features make it suitable for various tiling projects.

Figure 1: Einhell TE-TC 920 UL Radial Tile Cutter. This image shows the complete tile cutter assembly, including the work table, motor unit, and foldable stand.

2. Безбедносна упутства

Увек се придржавајте следећих мера предострожности како бисте смањили ризик од струјног удара, пожара и озбиљних повреда:

• Безбедност на радном месту: Одржавајте радни простор чистим и добро осветљеним. Не користите електричне алате у експлозивној атмосфери, као што је присуство запаљивих течности, гасова или прашине. Држите подаље децу и особе у близини док користите електрични алат.
• електрична безбедност: Power tool plugs must match the outlet. Never modify the plug in any way. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators. Do not expose power tools to rain or wet conditions.
• Лична безбедност: Always wear eye protection, hearing protection, and appropriate dust masks. Do not overreach. Keep proper footing and balance at all times. Dress properly; avoid loose clothing or jewelry.
• Употреба и одржавање алата: Не форсирајте електрични алат. Користите одговарајући електрични алат за вашу примену. Искључите утикач из извора напајања пре него што извршите било каква подешавања, промените додатну опрему или одложите електрични алат.
• Specific Tile Cutter Safety:
  • Ensure the water tank is filled before operation to cool the diamond cutting disc and suppress dust.
  • Never operate the machine without the blade guard in place.
  • Keep hands clear of the cutting disc during operation.
  • The laser guide emits a laser beam; avoid direct eye exposure.
  • Чврсто причврстите радни предмет пре сечења.

3. Компоненте производа

The Einhell TE-TC 920 UL Radial Tile Cutter consists of the following main components:

• Моторна јединица: 900 W motor with six ball bearings for smooth operation.
• Diamond Cutting Disc: Turbo diamond cutting disc with water feed system.
• Радни сто: Height-adjustable work table (890 x 475 mm) with non-slip rubber surfaces and two additional extensions.
• Склопиви сталак: Robust chassis with a locking function for stability and easy storage.
• Water Collection Tray: Large steel water collection tank with an integrated pump, impurity collection basin, and washable filter foams.
• Ласерски водич: Optical laser for enhanced cutting precision.
• Угаони граничник: Precisely adjustable angle stop for miter and double miter cuts.
• Tilting Motor: Motor unit can be tilted up to 45° for bevel cuts.
• Transport Features: Integrated transport wheels and handle for easy mobility.

4. Подешавање

Follow these steps to set up your tile cutter:

1. Распакивање и склапање: Carefully remove all components from the packaging. Unfold the stand and ensure it is securely locked into position. Attach the work table and any extensions as per the assembly diagrams (refer to separate assembly sheet if provided).
2. Installing the Cutting Disc: Ensure the machine is unplugged. Mount the turbo diamond cutting disc onto the motor shaft, securing it with the provided fasteners. Ensure the disc rotation direction matches the arrow on the machine.
3. Пуњење резервоара за воду: Fill the large steel water collection tank with clean water. The water level should be sufficient to cover the lower part of the cutting disc during operation.
4. Повезивање на напајање: Connect the tile cutter to a suitable 240V AC power outlet. Ensure the power switch is in the 'OFF' position before plugging in.
5. Adjusting Work Table Height: Adjust the height of the work table to a comfortable working position using the adjustment mechanism.
6. Ласерско поравнање: Turn on the laser guide and check its alignment. Adjust if necessary to ensure it projects a straight line for accurate cuts.

5. Операција

Operating the Einhell TE-TC 920 UL for precise tile cutting:

1. Припремите радни комад: Mark the cutting line on your tile. Place the tile firmly on the non-slip work table, aligning the marked line with the laser guide.
2. Adjust Angle Stop: For straight cuts, ensure the angle stop is set to 0°. For miter cuts, adjust the angle stop to the desired angle (e.g., 45°).
3. Покрените машину: Turn on the power switch. The motor will start, and the water pump will activate, supplying water to the cutting disc. Allow the disc to reach full speed before starting the cut.
4. Извршите рез: Gently push the motor unit along the guide rail, allowing the diamond disc to cut through the tile. Maintain a steady, even pressure. Do not force the cut. The maximum cutting length is 920 mm.
5. Коси резови: To make bevel cuts, tilt the motor unit to the desired angle (up to 45°) before starting the cut. Ensure the tilt mechanism is securely locked.
6. Након сечења: Once the cut is complete, return the motor unit to its starting position. Turn off the machine and wait for the cutting disc to stop completely before removing the tile.

6. Одржавање

Regular maintenance ensures the longevity and optimal performance of your tile cutter:

• Чишћење резервоара за воду: After each use, drain the water tank and clean out any tile slurry or debris. The impurity collection basin and washable filter foams should be regularly cleaned to prevent pump blockage.
• Inspecting the Cutting Disc: Regularly check the diamond cutting disc for wear, damage, or cracks. Replace worn or damaged discs immediately.
• Генерално чишћење: Clean the machine's surfaces, guide rails, and motor unit with a damp cloth. Ensure no water enters electrical components.
• подмазивање: Periodically apply a light lubricant to the guide rails to ensure smooth movement of the motor unit.
• Складиштење: When not in use, clean the machine thoroughly, drain the water tank, and store it in a dry, secure location. The foldable stand allows for compact storage.

КСНУМКС. Решавање проблема

Погледајте табелу испод за уобичајене проблеме и њихова решења:

8. Техничке спецификације

Key technical data for the Einhell TE-TC 920 UL Radial Tile Cutter:

• Број модела: 4301220
• Снага: 900 Ваттс
• Волtage: 240 В АЦ
• брзина: 2950 рпм
• Дужина сечива: 200 мм
• Макс. Дужина сечења: 920 мм
• Motor Tilt: 0 - 45°
• Work Table Dimensions: 890 к 475 мм
• Димензије производа (Д к Ш к В): 132.8 к 56.6 к 46.1 цм
• Тежина: 42.7 килограма
• сертификација: CE
• Укључене компоненте: Radial Tile Cutter, Laser

9. Гаранција и подршка

For warranty information, please refer to the warranty card included with your product or visit the official Einhell website. In case of technical issues, spare parts inquiries, or support needs, please contact Einhell customer service directly. Keep your purchase receipt as proof of purchase.

You can find contact details for Einhell support on their official webсајт: www.einhell.com