The Everbilt 1/6 HP Submersible Utility Pump (Model SUP54-HD) is designed for efficient water removal in various settings. This pump is ideal for use in most areas where unwanted water gathers, such as window wells, hot tubs, spas, and flooded basements. It can be totally submersed in water and is capable of pumping down to 3/8 inches from flat surfaces. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting.
Слика 1: Предња страна view of the Everbilt 1/6 HP Plastic Utility Pump.
Важне информације о безбедности
WARNING: To reduce the risk of electrical shock or injury, fully read and follow the instruction manual before attempting to install or operate this pump.
This pump should be installed in accordance with the National Electrical Code (NEC) and local codes and ordinances.
This pump should be connected to a 115V, GFCI outlet protected with a 5 AMP осигурач или прекидач.
The use of an extension cord to power this pump is NOT permitted.
Always unplug this pump when moving or servicing the pump and its installation.
Never pump flammable or explosive liquids. Only water should be pumped with this pump.
Always wear ANSI Z87.1 safety glasses when operating this pump.
Слика 2: Страна view of the pump showing important warning and caution labels.
Упутства за подешавање
The Everbilt utility pump is designed for easy setup. Follow these steps to prepare your pump for operation:
Attaching a Garden Hose: Attach a 1-1/4 inch inside diameter or larger garden hose (not included) to the pump's outlet. Ensure a secure connection to prevent leaks.
Attaching a Smaller Hose (if preferred): If you prefer to use a smaller hose, attach the adapter (Part B) to the pump (Part A) outlet. Then securely attach the smaller hose to the adapter.
Пласман: Place the pump in the area where water needs to be removed. Ensure the pump is fully submerged in water before plugging it in. The pump is designed to drain water from flat surfaces down to 3/16 inches.
Слика 3: Врх view of the pump illustrating the hose connection point.
For a visual guide on setup and operation, refer to the video below:
Video 1: Everbilt HP Plastic Utility Pump Review. This video demonstrates the pump's features and basic setup, including how to attach a hose and submerge the pump for operation.
Упутство за употребу
Once the pump is properly set up and submerged, operating it is straightforward:
Потопите пумпу: Ensure the pump is fully submerged in the water you wish to remove. The pump is designed to handle solids up to 1/8 inch in diameter, but avoid placing it directly in mud or areas with excessive debris to prevent clogging.
Повежите се са напајањем: Plug the pump's 8-foot power cord into a 115V, GFCI protected outlet. The pump will begin operating automatically once plugged in. There is no on/off switch on the unit itself.
Monitor Discharge: Observe the water being discharged through the hose. The pump has a maximum flow rate of 28 gallons per minute and a maximum lifting height of 20 feet.
Искључивање: Once the desired water level is reached or the area is dry, unplug the pump from the electrical outlet.
See the pump in action in the following videos:
Video 2: "How fast does this work?" This video demonstrates the pump's powerful water removal capabilities in a pool setting.
Video 3: "No more water in the basement (Review)." This video showcases the pump's effectiveness in removing standing water from a basement, highlighting its ability to pump water close to the floor.
Одржавање
Regular maintenance ensures the longevity and optimal performance of your Everbilt utility pump:
Рутинска инспекција: Periodically unplug the pump (making certain your hands are dry and you are not standing in water). Inspect the pump intake and remove any debris, such as leaves or small particles, that may have accumulated. Then plug the pump back into the grounded GFCI outlet.
Clearing Clogs: If the pump becomes clogged with debris, follow these steps:
Искључите пумпу из струје.
Unscrew the screws (typically 6) and carefully remove the base plate.
Unscrew any additional screws (typically 4) and remove the impeller gasket.
Remove any debris around the shaft and impeller.
This pump contains cooling oil. Do NOT open the motor housing.
Решавање проблема
If you encounter issues with your pump, refer to the common problems and solutions below:
Проблем
Могући узрок
Решење
Pump runs but only delivers a small amount of water.
Hose kinked or clogged; Impeller partially clogged; Air lock.
Check hose for kinks/clogs; Clean impeller; Tilt pump to release air.
Осигурач прегорева или прекидач струјног кола се активира када се пумпа покрене.
Motor overload; Incorrect fuse/breaker size; Impeller/shaft binding.
Check for motor obstruction; Ensure correct fuse/breaker; Clean impeller/shaft.
Motor runs for a short time, then stops.
Thermal overload protection activated; Low water level.
Allow pump to cool; Ensure sufficient water for continuous operation.
Спецификације
Феатуре
Детаљ
Бранд
Евербилт
Број модела
СУП54-ХД
Хорсеповер
1/6 КС (0.17 КС)
Волtage
115 Волтс
Максимални проток
28 галона у минути (1680 GPH)
Максимална висина подизања
20 стопа
Димензије производа
9.06 cm D x 5.51 cm Š x 6.3 cm V
Тежина артикла
6.14 фунти
Материјал
Пластика
Извор напајања
АЦ/ДЦ
Handles Solids Up To
1/8 inch diameter
Дужина кабла за напајање
8 стопа
Figure 4: Performance data and specifications for Everbilt utility pumps.
Гаранција и подршка
The Everbilt 1/6 HP Plastic Utility Pump comes with a 1-годишња ограничена гаранција. For warranty claims or technical support, please contact the distributor:
Молимо вас да сачувате рачун као доказ о куповини за евентуалне рекламације у вези са гаранцијом.
Повезани документи - СУП54-ХД
Водич за инсталацију хидроизолационих додатака Everbilt Свеобухватни водич за инсталацију хидроизолационе додатне опреме марке Everbilt, са детаљима о припреми подлоге, изради спојева, заптивању углова и цеви и завршном постављању плочица за водоотпорне инсталације.
Водич за употребу и негу пумпе за прскање травњака Everbilt Plastic Овај водич пружа свеобухватна упутства за пумпу за прскање травњака марке Everbilt Plastic, која обухватају инсталацију, рад, мере предострожности, одржавање и решавање проблема за моделе EFLS10-HD, EFLS15-HD и EFLS20-HD.
