SSV Works MRB3

SSV Works WP-MRB3 Universal Weatherproof Media Controller User Manual

Model: MRB3

1. Увод

The SSV Works WP-MRB3 is a compact, weatherproof media controller designed for various 12-volt applications, including UTVs, Jeeps, trucks, and boats. It integrates Bluetooth, AM/FM radio, and an auxiliary input, providing versatile audio control. The unit features a 2Ω stable amplifier with up to 200W output, capable of powering up to 8 speakers.

2. Садржај пакета

Проверите да ли су све ставке присутне у пакету:

  • MRB3 Media Controller
  • Hideaway Brain Unit
  • Монтажни хардвер
  • Електрична инсталација
  • USB/3.5mm Aux Adapter
  • Упутство за употребу
SSV Works MRB3 Media Controller components and wiring diagram

Слика 2.1: Готовоview of the MRB3 controller, hideaway brain, and wiring connections. This diagram illustrates the main components and their interconnections for installation.

Optional trim ring for SSV Works MRB3 Media Controller

Слика 2.2: The optional trim ring, which can be used for a finished look after installation.

3. Инсталација

Proper installation is crucial for optimal performance and durability. It is recommended to have this unit installed by a qualified professional.

3.1 Монтажа контролера

  1. Choose a flat, secure surface for mounting the controller. The unit requires less than 1 inch of space behind the face for flush mounting.
  2. Ensure the chosen location allows for easy access to controls and visibility of the display.
  3. Use the provided mounting hardware to secure the controller.

3.2 Ожичење

The MRB3 is a two-piece stereo system consisting of a surface-mounted controller and a hideaway brain unit with a built-in amplifier. Refer to the wiring diagram (Figure 2.1) for detailed connections.

  • Снага: Connect the red wire to a switched 12V power source and the black wire to a reliable ground.
  • говорници: Connect your speakers to the appropriate outputs on the hideaway brain unit. The 2Ω stable amplifier supports up to 8 speakers.
  • Помоћни улаз: Use the included USB/3.5mm aux adapter for external audio devices.
  • Антена: Connect an AM/FM antenna for radio reception.
SSV Works MRB3 Media Controller installed in a vehicle dashboard

Слика 3.1: Бившиample of the MRB3 controller installed flush within a vehicle's dashboard, demonstrating its compact and integrated appearance.

4. Операција

The MRB3 controller features a backlit hyper-white LED display for clear visibility in various weather conditions.

Фронт view of SSV Works MRB3 Media Controller with buttons and display

Слика 4.1: The front panel of the MRB3 controller, showing the volume, track, mode, and power buttons, along with the LCD display.

4.1 Основне контроле

  • Дугме за напајање (⑂): Press and hold to turn the unit ON or OFF. A short press may mute/unmute or change source depending on context.
  • Јачина звука (+/-): Користите дугмад „+“ и „-“ да бисте подесили јачину звука.
  • Дугме за режим: Press to cycle through available audio sources: Bluetooth, FM, AM, and Auxiliary Input.
  • Play/Pause (▶‖): Controls playback for Bluetooth and Auxiliary sources.
  • Track (⌃ / ⌄): Skips tracks forward or backward in Bluetooth mode. In radio mode, these buttons tune stations.

4.2 Блуетоотх упаривање

  1. Turn on the MRB3 unit.
  2. Притисните тастер Режим button until 'Bluetooth' is selected on the display.
  3. На свом мобилном уређају омогућите Блуетоотх и потражите доступне уређаје.
  4. Select 'SSV Works MRB3' from the list to pair. A confirmation tone or message will indicate successful pairing.

4.3 Рад AM/FM радија

  1. Притисните тастер Режим button to select 'FM' or 'AM'.
  2. Користите Трацк buttons (⌃ / ⌄) to manually tune or seek radio stations.
  3. The unit supports 6 preset EQ options for sound customization.

4.4 Аудио подешавања

The MRB3 offers bass, treble, balance, and fade capabilities. Consult the full instruction manual for detailed steps on accessing and adjusting these settings.

5. Одржавање

To ensure the longevity and performance of your SSV Works MRB3, follow these maintenance guidelines:

  • Чишћење: Користите меку, дamp cloth to clean the controller's surface. Avoid abrasive cleaners or solvents that could damage the finish or display.
  • Отпорност на временске утицаје: While the unit is weatherproof, avoid direct high-pressure water spray, especially on the connections. Ensure all covers and seals are properly in place after installation or maintenance.
  • Везе: Periodically check all wiring connections for corrosion or looseness, especially in harsh environments.

КСНУМКС. Решавање проблема

If you encounter issues with your MRB3 unit, refer to the following common problems and solutions:

ПроблемМогући узрокРешење
Но ПоверЛабав прикључак за напајање, прегорели осигурач, неисправно ожичење.Check power and ground connections. Inspect the fuse in the power line. Verify wiring against the diagram.
Нема звукаSpeaker wires disconnected, volume too low, incorrect source selected, ampпитање лифиера.Check speaker connections. Increase volume. Ensure correct audio source (Bluetooth, FM/AM, Aux) is selected.
Блуетоотх се не повезујеDevice not in pairing mode, previously paired device connected, interference.Ensure MRB3 is in Bluetooth mode. Forget 'SSV Works MRB3' on your device and re-pair. Ensure no other device is connected.
Слаб радио пријемАнтена није повезана, оштећена антена, подручје слабог сигнала.Check antenna connection. Ensure antenna is properly installed and undamaged. Try tuning in a different location.

If the problem persists after attempting these solutions, contact SSV Works customer support for further assistance.

7. Спецификације

ФеатуреДетаљ
МоделМРБ3
БрандССВ Воркс
Аудио извориBluetooth, AM/FM Radio, Auxiliary Input
Amplifier Izlaz200 Watts Max (4-channel)
Импеданса звучника2Ω Stable
Волtage12 Волтс
Посебне карактеристикеWeatherproof Design, Backlit LED Display, Bass/Treble/Balance/Fade Controls, 6 Preset EQ Options
Димензије производа1.38 x 0.2 x 0.89 inches (Controller Face)
Тежина артикла2.6 фунти
Сафети РатингДОТ Цертифиед

8. Компатибилност

The SSV Works MRB3 is a universal unit designed for any 12-volt power system. It is suitable for a wide range of vehicles and applications, including:

  • Side-by-Side (UTV) vehicles (e.g., Polaris RZR, Can-Am X3, Polaris Ranger, Kawasaki Teryx, Honda, Yamaha)
  • Jeeps
  • Камиони
  • Чамци
  • Toy Haulers
  • Campерс
  • Classic Automobiles (e.g., Karmann Ghia, Porsche 911, Jaguar E-Type, Chevy Corvette)
Side-by-side vehicle driving on a dirt track

Слика 8.1: Example of a side-by-side vehicle, a common application for the MRB3.

Side-by-side vehicle kicking up dust on a desert trail

Слика 8.2: Још један бившиample of a side-by-side vehicle, highlighting the rugged environments the MRB3 is designed for.

Classic red convertible car

Слика 8.3: A classic convertible car, demonstrating the MRB3's suitability for various automotive installations.

Classic black sports car

Слика 8.4: A classic sports car, illustrating the versatility of the MRB3 for different vehicle types.

9. Гаранција и подршка

For specific warranty information regarding your SSV Works MRB3 Media Controller, please refer to the warranty card included with your product or visit the official SSV Works webсајт. Гарантни услови обично покривају производне недостатке током одређеног периода од датума куповине.

If you require technical assistance, troubleshooting beyond this manual, or have questions about your product, please contact SSV Works customer support directly. Contact information can usually be found on the manufacturer's webсајту или у паковању производа.

Повезани документи - МРБ3

Преview SSV Works MRB3 Bluetooth Media Controller User Guide
User guide for the SSV Works MRB3 Bluetooth Media Controller, detailing radio functions, Bluetooth audio streaming, external audio connections, button operations, wiring, and general settings.
Преview Упутство за употребу и инсталацију SSV Works MRB3 Bluetooth медијски контролер и RKR-2K аудио комплета
Свеобухватно упутство за употребу и инсталацију за SSV Works MRB3 Bluetooth медијски контролер и RKR-2K аудио комплет са 2 звучника за Can-Am Ryker. Укључује упутства за рад, ожичење и детаљна упутства за инсталацију.
Преview Упутство за инсталацију SSV Works X32-Q5K3 Kicker аудио комплета са 5 звучника за Can-Am X3
Свеобухватни водич за инсталацију аудио комплета са 5 звучника SSV Works X32-Q5K3 Kicker, дизајнираног за моделе Can-Am X3 (2014+). Садржи списак делова, потребан алат и упутства корак по корак за ожичење, комплет за контролну таблу, сабвуфер и инсталацију звучника.
Преview Kicker Wildcat XX Stage 1 Audio Kit 2436-466 Installation Guide
Step-by-step installation guide for the Kicker Wildcat XX Stage 1 Audio Kit (Model 2436-466) by SSV Works, including warranty information, tools needed, parts list, and assembly instructions for speakers, MRB3 controller, and AUX-in port for Textron Wildcat XX vehicles.
Преview SSV Works RZ5-PHZ1A Polaris RZR Pro Speaker Dash Pod Kit Installation Guide
Comprehensive installation guide for the SSV Works RZ5-PHZ1A A-Spec 2 Speaker Dash Pod Kit with JVC MR1 for 2020-2024 Polaris RZR Pro models. Includes disassembly, assembly, wiring, and parts lists.
Преview SSV Works 230-SWTS-RZ5 Polaris RZR Pro R Turn Signal Kit with Horn Installation Guide
Comprehensive installation guide for the SSV Works 230-SWTS-RZ5 Turn Signal Kit with Horn, designed for 2022-Up Polaris RZR Pro R models. Includes detailed parts list, wiring diagram, step-by-step installation instructions, and switch function explanations.