SIRUI Compact Traveler 5C Carbon Fiber Tripod Instruction Manual

Производ је завршенview

The SIRUI Compact Traveler 5C Tripod is a lightweight and sturdy carbon fiber travel tripod designed for cameras. It features a 360° panorama ball head with an Arca Swiss quick release plate, supporting a maximum load of 8.8 lbs (4 kg). Its compact design makes it ideal for travel and outdoor photography.

Шта је у кутији

Upon unboxing your SIRUI Compact Traveler 5C Tripod, you should find the following items:

• SIRUI Traveler 5C Tripod x1
• Portable Bag x1
• Кутија за паковање x1
• Аллен Вренцх к3
• Stainless Steel Hook x1
• Сертификат к1
• Сервисна картица к1

Сетуп

Расклапање статива

1. Grasp the tripod firmly and release the leg locks.
2. Extend the legs outwards until they click into one of the three available leg angle positions (22°, 52°, or 82°).
3. To adjust the leg length, twist the quick-release twist-locks on each leg section counter-clockwise to loosen, extend the leg to the desired length, and then twist clockwise to secure.

Причвршћивање камере

1. Ensure the quick release plate is securely attached to the bottom of your camera using the 1/4" screw.
2. Отворите цлamp on the ball head by turning the quick release plate knob.
3. Slide the camera with the attached quick release plate into the clamp until it is firmly seated.
4. Tighten the quick release plate knob to secure your camera.

Подешавање централне колоне

The 2-section center column can be extended for additional height. Twist the column lock to loosen, extend the column, and then tighten to secure. For extreme low-angle photography or macro shooting, the center column can be inverted.

Using the Stability Hook

A stability hook is located at the bottom of the center column. You can hang a weight (e.g., your camera bag) from this hook to increase the tripod's stability, especially in windy conditions or when using heavier camera setups.

Упутство за употребу

Операција лоптасте главе

The aluminum ball head features two independent control knobs. One knob controls the ball's movement, allowing for smooth rotation and vertical tilting for panoramic and portrait shots. The other knob controls the panoramic base rotation.

Видео Демонстрације

Одржавање

To ensure the longevity and optimal performance of your SIRUI Compact Traveler 5C Tripod, follow these maintenance guidelines:

• Чишћење: After use, especially in dusty, sandy, or wet environments, wipe down all parts of the tripod with a clean, damp cloth. Ensure all twist-locks and moving parts are free of debris.
• Сушење: If the tripod gets wet, extend all leg sections and allow them to air dry completely before collapsing and storing. This prevents corrosion and mildew.
• подмазивање: Periodically check the smoothness of the leg extensions and ball head movements. If they become stiff, apply a small amount of silicone-based lubricant to the moving parts, avoiding excessive application.
• Складиштење: Store the tripod in its portable bag in a dry, cool place away from direct sunlight and extreme temperatures.
• инспекција: Редовно проверавајте све завртње, браве и спојеве да ли имају знакова хабања или оштећења. Затегните све лабаве завртње помоћу приложених имбус кључева.

Решавање проблема

If you encounter any issues with your SIRUI Compact Traveler 5C Tripod, consider the following common troubleshooting steps:

• Leg sections not extending/retracting smoothly: Ensure the twist-locks are fully loosened. Clean any sand or dirt from the leg sections and apply a small amount of lubricant if necessary.
• Ball head movement is stiff or loose: Adjust the tension knob on the ball head. If it remains stiff, clean around the ball joint. If it's too loose, ensure the camera is not exceeding the maximum load capacity.
• Нестабилност статива: Ensure all leg sections are fully extended and locked. Verify that the leg angles are properly engaged. For added stability, hang a weight from the stability hook.
• Camera not securely attached: Double-check that the quick release plate is tightly screwed onto your camera and that the quick release clamp on the ball head is fully tightened after inserting the plate.

For persistent issues, please refer to the service card included in your package or contact SIRUI customer support.

Спецификације