1. Увод
This manual provides essential instructions for the safe and efficient use of your Herdio 4 Inch 200 Watt Outdoor Indoor Bluetooth Speakers, Model HOS-401WBT. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your speakers.
2. Садржај пакета
Проверите да ли су све ставке наведене у наставку укључене у ваш пакет:
- 2 x Herdio 4 Inch Speakers (1 Active, 1 Passive)
- 1 x 12V Power Adapter and Supply
- 1 x 16FT/5M Speaker Cable
- 1 к Упутство за употребу
- Монтажни носачи и завртњи
3. Спецификације
| Феатуре | Детаљ |
|---|---|
| Назив модела | HOS-401WBT |
| Спеакер Типе | Оутдоор / Индоор |
| Излазна снага | 200 Watts (100W per speaker) |
| Пречник вуфера | 4 инча |
| Пречник високотонца | 1 инча |
| Повезивање | Bluetooth, Wired (Passive speaker connection) |
| Блуетоотх домет | До 20.12 метара (66 стопе) |
| Ниво отпорности на воду | IP66 (отпоран на воду) |
| Материјал | акрилонитрил бутадиен стирен (АБС) |
| Димензије производа (Д к Ш к В) | 8.62" x 5.67" x 6.62" (219 mm x 144 mm x 159 mm) |
| Улазни волtage | 12 Волтс |
| Режим аудио излаза | Стерео |
4. Подешавање
4.1 Монтирање звучника
The Herdio speakers come with versatile swivel brackets for flexible placement. These brackets allow for a 90-120 degree range of motion, enabling you to direct sound as desired.
- Уклоните заграде: Unscrew the knobs on the sides of the speakers to detach the mounting brackets.
- Постављање ознаке: Choose your desired location (e.g., patio, garage, living room wall). Use the detached bracket to mark the drill points for the screws.
- Инсталирајте носаче: Securely attach the brackets to the wall or ceiling using appropriate screws (provided).
- Прикључите звучнике: Slide the speakers onto the installed brackets. Adjust the speaker angle and tighten the knobs to secure them in place.
4.2 Wiring the Speakers
The Herdio speaker system consists of one active speaker and one passive speaker. The active speaker contains the amplifier and Bluetooth module, while the passive speaker connects to the active one via the provided speaker cable.
- Connect Passive to Active: Locate the red (+) and black (-) terminals on the back of both speakers. Connect the red wire of the speaker cable to the red terminal on both speakers, and the black wire to the black terminal on both speakers. Ensure a secure connection by turning the terminal clockwise to tighten.
- Прикључак за напајање: Plug the 12V power adapter into the DC 12V input port on the active speaker. Then, plug the power adapter into a suitable electrical outlet.
5. Операција
5.1 Блуетоотх упаривање
Once powered on, the active speaker will automatically enter Bluetooth pairing mode. The Bluetooth indicator light will flash, indicating it's ready to connect.
- Активирајте Блуетоотх: On your smartphone or tablet, enable Bluetooth.
- Тражи Уређај: Look for "HOS-401WBT" in the list of available Bluetooth devices.
- Повежите се: Select "HOS-401WBT" to pair. A confirmation tone will sound from the speakers once successfully connected.
5.2 Аудио репродукција
After successful pairing, you can play audio from your connected device. The speakers will output stereo sound.
- Контрола јачине звука: Adjust the volume directly from your connected device.
- Квалитет звука: The speakers are designed to deliver full-range sound with deep bass and clear highs.
6. Одржавање
- Чишћење: Користите меку, суву крпу за чишћење површина звучника. Избегавајте абразивна средства за чишћење или раствараче.
- Заштита од временских прилика: Although IP66 rated, it is recommended to protect the power adapter from direct exposure to rain or extreme weather conditions.
- Складиштење: Ако складиштите звучнике дуже време, искључите их из напајања и чувајте их на хладном и сувом месту.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Нема струје | Адаптер за напајање није повезан или је утичница неисправна. | Ensure the power adapter is securely plugged into the active speaker and a working electrical outlet. |
| Нема звука | Speakers not paired, volume too low, or incorrect wiring. | Verify Bluetooth connection, increase device volume, and check speaker cable connections between active and passive speakers. |
| Блуетоотх прекид везе | Device out of range or interference. | Ensure the paired device is within 20 meters (66 feet) of the active speaker. Minimize obstacles and interference. |
| Изобличен звук | Volume too high or poor audio source. | Reduce the volume on your device. Try a different audio source or file. |
8. Гаранција и подршка
All Herdio speaker products come with a 1-годишња ограничена гаранција against defects in materials and workmanship. Proof of purchase is required for all claims.
During the warranty period, Herdio will replace any defective part and correct any defect in workmanship without charge for either parts or labor.
The Technical Support Center at HERDIO is available from Monday to Friday, excluding holidays.
For questions or support, please contact us at: суппорт@хердиотецх.цом
