AOPUTTRIVER AP-846A HVAC Anemometer Instruction Manual

1. Производ је готовview

The AOPUTTRIVER AP-846A is a professional digital anemometer designed for high-accuracy measurement of wind speed, wind temperature, and air flow (CFM/CMM). This multi-functional device is suitable for various applications including HVAC system analysis, air blower testing, environmental monitoring, and outdoor activities.

Key features include a large backlit LCD display, data hold function, MAX/MIN/AVG measurement modes, unit switching, and automatic power-off for battery conservation. The remote vane sensor with an extendable coiled cable allows for flexible and precise measurements in various environments.

Figure 1: AOPUTTRIVER AP-846A HVAC Anemometer

2. Садржај пакета

Након отварања пакета, молимо вас да проверите да ли су све доле наведене ставке присутне и у добром стању:

• 1 x AOPUTTRIVER AP-846A Digital Anemometer Main Unit
• 1 x Remote Vane Sensor with Coiled Cable
• 1 x 9V (6F22) Battery
• 1 x Hard Carrying Case
• 1 к Упутство за употребу

Слика 2: Садржај пакета

3. Идентификација компоненте

Familiarize yourself with the main components and controls of the AP-846A anemometer:

Слика 3: Означене компоненте

1. ЛЦД екран: Приказује очитавања мерења, јединице и индикаторе.
2. MAX/MIN Value Switch: Пребацује се између максималног, минималног и тренутног очитавања.
3. Тастер за укључивање: Укључује/искључује уређај.
4. Wind Velocity/Flow Transform Key: Switches between wind velocity and air flow (CFM/CMM) modes.
5. Data Holding Key: Замрзава тренутно очитавање на екрану.
6. Unit Transform Key: Changes measurement units (e.g., m/s, mph, °C, °F).
7. Data Record Key: Покреће снимање података.
8. Measuring Key for Average Value of Wind Flow: Calculates and displays the average air flow.
9. Read Recorded Data Key: Recalls stored data.
10. Wind Flow AVG 2/3 MAX and Figure Input: Used for advanced air flow calculations and area input.
11. Reset Key in "READ" Mode/Clear Recorded: Resets recorded data.
12. Backlight On/Off Key: Press to activate/deactivate the display backlight.
13. Прекидач јединице температуре: Toggles between Celsius (°C) and Fahrenheit (°F).
14. Duct Area Input and Sampling Time Setting Key: Used for setting duct area for CFM/CMM calculations.
15. Жица за повезивање: Connects the main unit to the vane sensor.
16. Wind Velocity Sensors: Rotating vane for wind speed measurement.

4. Подешавање

4.1 Инсталација батерије

The AP-846A requires one 9V (6F22) battery. To install or replace the battery:

1. Пронађите одељак за батерије на задњој страни главне јединице.
2. Unscrew the two screws securing the battery cover.
3. Insert the 9V battery, ensuring correct polarity.
4. Replace the battery cover and secure it with the screws.

Note: For optimal performance and to prevent leakage, use alkaline batteries and remove batteries if the device will not be used for an extended period.

4.2 Connecting the Vane Sensor

Connect the remote vane sensor to the main unit by plugging the USB-style connector of the coiled cable into the corresponding port on the top of the main unit.

Video 1: Demonstrates battery installation and connecting the vane sensor to the main unit.

5. Упутство за употребу

5.1 Укључивање/искључивање

• Да бисте укључили, притисните Тастер за укључивање (3 на слици 3).
• За искључивање притисните и држите тастер Тастер за укључивање for a few seconds. The device also features an auto power-off function after 5 minutes of inactivity to save battery.

5.2 Контрола позадинског осветљења

Притисните тастер Backlight On/Off Key (12 in Figure 3) to turn the display backlight on or off. This improves visibility in low-light conditions.

5.3 Избор јединице

The AP-846A supports multiple units for wind speed and temperature:

• Wind Speed Units: Притисните тастер Unit Transform Key (6 in Figure 3) to cycle through m/s, km/h, ft/min, knots, and mph.
• Јединице температуре: Притисните тастер Прекидач јединице температуре (13 in Figure 3) to switch between Celsius (°C) and Fahrenheit (°F).

5.4 Wind Speed and Temperature Measurement

To measure wind speed and temperature:

1. Ensure the vane sensor is connected to the main unit.
2. Укључите уређај.
3. Hold the vane sensor in the airflow, ensuring the air flows through the vane in the direction indicated by the arrow on the sensor.
4. The wind speed and temperature readings will be displayed on the LCD.

Figure 4: Measuring airflow from an HVAC unit.

Figure 5: Measuring airflow from a fan.

5.5 CFM (Cubic Feet per Minute) Measurement

To measure CFM, you need to input the area of the duct or vent:

1. Притисните тастер "UNIT" кључ (6 in Figure 3) to select CFM or CMM mode.
2. Притисните тастер "AREA" кључ (14 in Figure 3), then use the number keys to enter the duct area (e.g., 1 or 2 for predefined areas, or custom input).
3. Притисните тастер "ENTER" key to confirm the area.
4. Position the vane sensor in the airflow. The CFM/CMM reading will be displayed.

Formula: Flow = Velocity * (Free Area)

Figure 6: CFM Measurement Guide

5.6 MAX/MIN/AVG Measurement

Притисните тастер MAX/MIN Value Switch (2 in Figure 3) to cycle through maximum, minimum, and current readings. For average air flow, use the Measuring Key for Average Value of Wind Flow (8 на слици 3).

5.7 Задржавање података

Притисните тастер Data Holding Key (5 in Figure 3) to freeze the current reading on the display. Press it again to release the hold.

6. Одржавање

• Уређај одржавајте чистим и сувим. Обришите меком,amp тканина. Немојте користити абразивна средства за чишћење или раствараче.
• Store the anemometer in its protective carrying case when not in use to prevent damage to the vane sensor.
• Replace the 9V battery when the low power indicator appears on the display.
• Avoid exposing the device to extreme temperatures or high humidity.

КСНУМКС. Решавање проблема

• Нема екрана/уређаја који се не укључује: Проверите да ли је батерија инсталирана и уверите се да је довољно напуњена. Замените је ако је потребно.
• Нетачна очитавања: Ensure the vane sensor is clean and rotates freely. Verify that the sensor is positioned correctly in the airflow, facing the direction of the flow. Check for any obstructions.
• Display Not Changing: Check if the Data Hold function is activated. Deactivate it by pressing the Data Holding Key.
• CFM/CMM Readings Incorrect: Double-check the entered duct area value. Ensure the correct units (CFM/CMM) are selected.

8. Спецификације

Figure 7: Wind Velocity Range and Accuracy

9. Гаранција и подршка

AOPUTTRIVER provides 2-Years Technical Support for this product. If you encounter any problems or have questions regarding your AP-846A anemometer, please contact AOPUTTRIVER customer support for assistance. They will provide troubleshooting guidance or arrange for a replacement if necessary.