Важне информације о безбедности
Пажљиво прочитајте сва упутства пре склапања и употребе. Сачувајте ово упутство за будуће потребе.
- Максимална носивост: 110 кг (242 лбс)Не прекорачујте ову тежину.
- Ensure all screws and fittings are tightened securely before use. Re-tighten as needed to maintain stability.
- Немојте стајати на столици.
- Користите столицу на равној, стабилној површини.
Садржај пакета
Проверите да ли су све компоненте присутне пре почетка монтаже.
Image description: An overhead view of the IKEA LISABO Ash Chair components, including legs, seat, backrest, and hardware, laid out on a flat surface.
The IKEA LISABO chair package includes all necessary parts and hardware for assembly.
- Chair frame components
- Seat and backrest panels
- Окови за монтажу (шрафови, типле итд.)
- Алат за монтажу (нпр. имбус кључ)
Упутство за монтажу
This product requires assembly. Follow these steps carefully. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.
- Step 1: Attach the Legs to the Seat Frame.
Identify the four legs and the seat frame. Align the pre-drilled holes on the legs with those on the seat frame. Insert the provided screws and tighten them using the included tool. Do not overtighten initially.
Image description: An illustration showing the process of attaching the four wooden legs to the underside of the chair's seat frame using screws.
- Step 2: Secure the Backrest.
Position the backrest against the rear of the seat frame. Insert the remaining screws through the backrest into the frame and tighten them.
Image description: An illustration depicting the backrest being aligned and screwed into place at the back of the assembled seat frame and legs.
- Корак 3: Завршно затезање.
Once all components are loosely assembled, go back and firmly tighten all screws. Ensure the chair is stable and does not wobble.
Image description: A photograph of the fully assembled IKEA LISABO Ash Chair, ready for use.
Упутство за употребу
The IKEA LISABO chair is designed for seating purposes.
- Sit centrally on the seat for optimal balance and comfort.
- Avoid leaning excessively on the backrest or sides.
- Немојте користити столицу као степеницу или мердевине.
Одржавање и њега
Proper care will extend the life of your LISABO chair.
- Чишћење:
Обришите крпом дampened in a mild cleaner. Avoid abrasive cleaners or harsh chemicals.
- Сушење:
Wipe dry with a clean, dry cloth immediately after cleaning to prevent moisture damage.
- Затезање завртња:
For maximum quality and safety, re-tighten all screws and fittings as needed, typically every 3-6 months, or if the chair feels unstable.
- Окружење:
Keep the chair away from direct sunlight and heat sources to prevent wood from drying out or cracking.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Столица се клима | Loose screws, Uneven floor | Re-tighten all assembly screws. Move chair to a flat surface. |
| Скуеакинг ноисе | Loose joints | Re-tighten all screws. Apply a small amount of lubricant (e.g., paraffin wax) to joint areas if noise persists. |
| Surface damage (scratches) | Опште хабање | Use furniture polish or wood repair kits for minor scratches. |
Спецификације
- Модел: 804.572.36
- Бренд: ИКЕА
- Боја: Асх
- Максимално оптерећење: 110 кг (242 лбс)
- Димензије (склопљено):
- Ширина: 44 цм (17.3 инча)
- Дубина: 51 цм (20.1 инча)
- Висина: 80 цм (31.5 инча)
- Seat Width: 44 cm (17.3 inches)
- Seat Depth: 39 cm (15.4 inches)
- Seat Height: 45 cm (17.7 inches)
- Материјали:
- Legs/Frame support: Solid birch, tinted clear acrylic lacquer
- Seat rail: Layer-glued wood veneer, tinted clear acrylic lacquer
- Seat/Backrest: Layer-glued wood veneer, ash veneer, tinted clear acrylic lacquer
Гаранција и подршка
For information regarding warranty, returns, or additional support, please contact IKEA customer service or visit your local IKEA store.
You can find more information on the official IKEA webсајт: ввв.икеа.цом
