1. Увод
This manual provides instructions for the installation, operation, and maintenance of your Sena Parani M10 Bluetooth Motorcycle Headset. The Parani M10 allows for seamless communication and entertainment while riding, featuring Bluetooth intercom capabilities and smartphone connectivity for music, GPS, and calls. Please read this manual thoroughly before using the device to ensure proper function and safety.
2. Садржај пакета
The Parani M10 package typically includes the following components:
- Parani M10 Main Unit
- Жичани микрофон
- Звучници (пар)
- Хелмет Цлamp Кит
- УСБ кабл за пуњење
- Подлоге за звучнике
- Причвршћивачи на куке и омче за звучнике
- Кориснички приручник (овај документ)
Figure 2.1: Parani M10 complete kit showing the main unit, wired microphone, and speakers.
3. Производ је готовview
Familiarize yourself with the main unit's components and controls.
Figure 3.1: Parani M10 Main Unit Controls and Ports.
- Јог Диал: Used for volume control, menu navigation, and various functions.
- Вишенаменско дугме: Primary button for power, pairing, and call management.
- ЛЦД екран: Shows battery status, volume level, intercom pairing status, and other operational information.
- DC Power Charging & Firmware Upgrade Port: For charging the device and updating its firmware.
- Speakers and Microphone Port: Connection point for the wired speakers and microphone.
4. Подешавање и инсталација
The Parani M10 is designed for easy installation on most motorcycle helmets.
4.1 Причвршћивање главне јединице на кацигу
- Choose a suitable location on the left side of your helmet for the clamp комплет.
- Loosen the screws on the helmet clamp kit and slide it between the helmet shell and the inner padding. Ensure it is securely fastened.
- Slide the Parani M10 main unit onto the clamp док не кликне на своје место.
Figure 4.1: Parani M10 unit installed on a helmet.
4.2 Инсталирање звучника и микрофона
- Attach the hook and loop fasteners to the inside of your helmet, aligning them with your ears.
- Press the speakers onto the fasteners. Ensure the speakers are positioned directly over your ears for optimal audio quality.
- Attach the wired boom microphone to the inside of the helmet, positioning it close to your mouth but not directly in front of it to avoid wind noise.
- Route the speaker and microphone wires neatly under the helmet padding to the main unit's port.
- Connect the speaker/microphone cable to the corresponding port on the Parani M10 main unit.
4.3 Пуњење уређаја
Before first use, fully charge the Parani M10. Connect the USB charging cable to the DC Power Charging Port on the main unit and to a USB power source. The LCD display will indicate charging status.
5. Упутство за употребу
5.1 Укључивање/искључивање
- Укључено: Притисните и држите вишенаменско дугме 1 секунду.
- Искључивање: Притисните и држите вишенаменско дугме 5 секунде.
5.2 Контрола јачине звука
Rotate the Jog Dial clockwise to increase volume and counter-clockwise to decrease volume. The LCD display will show the current volume level.
Figure 5.1: LCD display showing pairing status and volume.
5.3 Упаривање паметних телефона
- With the M10 powered off, press and hold the Multi-function Button for 5 seconds until the LED flashes red and blue, indicating pairing mode.
- На паметном телефону идите на подешавања Bluetooth-а и потражите нове уређаје.
- Select "Parani M10" from the list of available devices.
- Once paired, the LED will flash blue, and the LCD will confirm connection.
- You can now listen to music, GPS navigation, and make/receive phone calls through your headset.
5.4 Блуетоотх интерфон
The Parani M10 supports intercom communication with up to four other Parani users on its dedicated Bluetooth intercom network.
- Pairing Intercom:
- Ensure both M10 units are powered on.
- On one M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
- On the second M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
- The units will automatically search and pair. Once paired, the LED will flash blue.
- Repeat this process for additional units (up to four total).
- Starting/Ending Intercom Conversation:
- To start an intercom conversation, tap the Jog Dial.
- To end an intercom conversation, tap the Jog Dial again.
5.5 Телефонски позиви
- Одговори на позив: Додирните вишенаменско дугме.
- Заврши позив: Додирните вишенаменско дугме.
- Одбиј позив: Притисните и држите вишенаменско дугме 2 секунде.
- Гласовно бирање: In standby mode, press and hold the Multi-function Button for 3 seconds. (Requires smartphone support for voice commands).
6. Одржавање
6.1 Чишћење
Обришите главну јединицу меком, дamp cloth. Do not use harsh chemicals or solvents. Ensure all ports are dry before charging or use.
6.2 Одржавање батерије
- Редовно пуните уређај, чак и ако га не користите, како бисте одржали здравље батерије.
- Avoid storing the device in extreme temperatures.
- Do not attempt to replace the internal battery yourself. Contact Sena support for battery service.
6.3 Ажурирања фирмвера
Periodically check the Sena website for firmware updates. Updating the firmware can improve performance and add new features. Connect the device to your computer using the USB cable and follow the instructions provided by Sena's Device Manager software.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Уређај се не укључује. | Ниска батерија. | У потпуности напуните уређај. |
| Не може се упарити са паметним телефоном. | Device not in pairing mode; smartphone Bluetooth off; interference. | Ensure M10 is in pairing mode (red/blue flashing LED). Turn smartphone Bluetooth off and on. Move away from other Bluetooth devices. |
| Интерфон се не повезује. | Units not in intercom pairing mode; out of range; already connected to other devices. | Ensure both M10 units are in intercom pairing mode. Reduce distance between units. Disconnect from other Bluetooth devices before intercom pairing. |
| Нема звука из звучника. | Volume too low; speakers not connected properly; faulty speakers. | Increase volume using the Jog Dial. Check speaker connections. Test with another audio source if possible. |
| Микрофон не ради. | Microphone not connected properly; faulty microphone. | Check microphone connection to the main unit. Ensure microphone is positioned correctly. |
7.1 Ресетовање на фабричка подешавања
If issues persist, a factory reset may resolve them. To perform a factory reset, press and hold the Multi-function Button and the Jog Dial simultaneously for 10 seconds. The device will reset to its default settings.
8. Спецификације
| Назив модела | Парани М10 |
| Блуетоотх верзија | Блуетоотх 5.1 |
| Интерцом Ранге | Up to 1 km (0.6 miles) in open terrain |
| Max Intercom Users | 4 (Parani-only network) |
| Талк Тиме | До 16 сати |
| Време пуњења | Отприлике 2.5 сата |
| Радна температура | -10°Ц до 55°Ц (14°Ф до 131°Ф) |
| Тежина | Прибл. 60 г (2.1 оз) |
Note: Specifications are subject to change without notice. Actual performance may vary based on environmental conditions and usage.
9. Гаранција и подршка
9.1 Информације о гаранцији
Sena products are covered by a limited warranty from the date of purchase. For detailed warranty terms and conditions, please refer to the official Sena webсајт или гарантни лист који сте добили уз производ. Сачувајте доказ о куповини за потребе подношења захтева за гаранцију.
9.2 Корисничка подршка
For technical assistance, troubleshooting, or general inquiries, please visit the official Sena website for support resources, FAQs, and contact information. You can also reach out to your local dealer for assistance.
- Сена Webсајт: ввв.сена.цом
- Парани Webсајт: www.parani.com
