Homcloud Wi-Fi Smart Shutter Module AS-CM1 Instruction Manual

1. Увод

This manual provides detailed instructions for the installation, setup, and operation of your Homcloud Wi-Fi Smart Shutter Module AS-CM1. This device allows you to control your electric blinds, shutters, or awnings remotely via a smartphone application or voice commands through compatible smart assistants like Amazon Alexa and Google Home. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Безбедносне информације

УПОЗОРЕЊЕ: Electrical installation should only be performed by a qualified electrician. Ensure the main power supply is disconnected before any installation or maintenance work. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Не излажите уређај влази или екстремним температурама.
• Ensure the device is installed in a standard electrical box (e.g., 503 type) or a suitable junction box.
• Проверите да ли су сви спојеви ожичења безбедни и исправни према дијаграму ожичења.
• The device operates on 220-240V ~ 50Hz.
• Maximum current: 3A. Do not exceed this rating.

3. Садржај пакета

Пакет укључује следеће ставке:

• 2 x Homcloud Wi-Fi Smart Shutter Module (AS-CM1)
• 1 к Упутство за употребу

4. Производ је готовview

The Homcloud Wi-Fi Smart Shutter Module is a compact device designed for integration into existing electrical systems to enable smart control of motorized window coverings. It features terminals for power input, neutral, and motor connections, along with a reset button for pairing.

Figure 4.1: Homcloud Wi-Fi Smart Shutter Module (Front View). This image displays the compact design of the module, suitable for installation within standard electrical boxes.

Figure 4.2: Module Label with Technical Specifications. This label provides essential information including the model code (AS-CM1), voltage (220-240V), maximum current (3A), and Wi-Fi standard (2.4GHz 802.11 b/g/n).

Figure 4.3: Module with Reset Button and Mounting Clip. This diagram highlights the location of the reset button and the integrated mounting clip for secure installation.

5. Спецификације

6. Инсталација

Before proceeding with installation, ensure the main power supply to the circuit is turned off at the circuit breaker. This device is designed for installation in a standard electrical wall box (e.g., 503 type) or a suitable junction box.

6.1 Дијаграм ожичења

Refer to the following diagram for correct wiring connections. Incorrect wiring can damage the device or cause electrical hazards.

Figure 6.1: Wiring Diagram for Homcloud Wi-Fi Smart Shutter Module. This diagram illustrates the connections for Line (L), Neutral (N), and motor control (Up/Down) terminals. It also shows the connection to a traditional wall switch.

6.2 Кораци ожичења

1. Искључите напајање: Turn off the main power supply at the circuit breaker before starting any wiring.
2. Идентификујте жице: Identify the Live (L), Neutral (N), and motor control wires (Up, Down) from your existing shutter system and wall switch.
3. Прикључите напајање: Connect the Live wire to the 'L' terminal and the Neutral wire to the 'N' terminal on the module.
4. Connect Motor: Connect the motor's 'Up' wire to the 'Up arrow' terminal and the motor's 'Down' wire to the 'Down arrow' terminal on the module.
5. Connect Wall Switch (Optional): If using a traditional wall switch in parallel, connect its output wires to the corresponding 'Up arrow' and 'Down arrow' terminals on the module. Ensure the switch is a momentary type (push-button) if used for both up and down control.
6. Безбедносни модул: Carefully place the module into the electrical box, ensuring no wires are pinched. The module is designed to fit into standard 503-type boxes.
7. Врати снагу: Once all connections are secure and the module is safely housed, restore power at the circuit breaker.

Напомена: The module works in parallel with traditional wall switches, allowing both smart control and manual control. Ensure sufficient space in the electrical box, especially if there are many existing wires.

7. Setup (App Configuration)

After successful physical installation, configure the module using the Homcloud application.

7.1 Преузмите апликацију

Download the "Homcloud" app from the Apple App Store or Google Play Store. The module is also compatible with the "Smart Life" app.

• Download Homcloud App (iOS)
• Download Homcloud App (Android)

7.2 Почетно упаривање

1. Укључено: Ensure the module has power. The Wi-Fi indicator light should be blinking rapidly. If not, press and hold the reset button (refer to Figure 4.3) for 5-10 seconds until it blinks rapidly.
2. Отвори апликацију: Open the Homcloud app and register or log in to your account.
3. Додај уређај: Tap the "+" icon or "Add Device" button.
4. Изаберите тип уређаја: Choose "Curtain Switch" or "Shutter Module" from the device list.
5. Повежите се на Ви-Фи: Ensure your smartphone is connected to a 2.4GHz Wi-Fi network. The module only supports 2.4GHz Wi-Fi. Enter your Wi-Fi password in the app.
6. Потврдите трептање: Confirm that the indicator light on the module is blinking rapidly in the app.
7. Процес упаривања: The app will begin searching for and connecting to the module. This process typically takes less than 4 minutes.
8. Додат уређај: Once connected, you can rename the device and assign it to a room.

Напомена: If pairing fails, ensure your Wi-Fi network is 2.4GHz and try again. You may need to reset the module by holding the reset button until the indicator blinks rapidly.

8. Упутство за употребу

Control your smart shutter module using the Homcloud app, voice commands, or the traditional wall switch.

8.1 Контрола апликација

• Open the Homcloud app and select your shutter module.
• You will see controls for "Open," "Close," and "Pause," along with a slider to set the opening percentage.
• Тајмер и распоред: Use the app to set schedules for automatic opening and closing of your shutters at specific times.
• даљински управљач: Control your shutters from anywhere with an internet connection.
• Дељење уређаја: Share control of the device with family members through the app's sharing function.

8.2 Гласовна контрола (Alexa и Google Home)

The module is compatible with Amazon Alexa and Google Home for voice control.

1. Повежи налог: In your Alexa or Google Home app, enable the "Homcloud" skill/action and link your Homcloud account.
2. Откријте уређаје: Замолите Алексу или Гугл Хоум да открију нове уређаје.
3. Гласовне команде: Користите команде као што су:
   • "Alexa, open [Shutter Name]"
   • "Hey Google, close [Shutter Name]"
   • "Alexa, set [Shutter Name] to 50%" (for partial opening/closing)

8.3 Ручна контрола

If connected to a traditional wall switch, you can still control your shutters manually. The module operates in parallel, meaning actions from the wall switch will be reflected in the app, and vice-versa.

КСНУМКС. Решавање проблема

• Уређај се не повезује на Wi-Fi:
  • Ensure your Wi-Fi network is 2.4GHz. The module does not support 5GHz networks during initial setup.
  • Проверите да ли је лозинка за Wi-Fi исправна.
  • Move the module closer to your Wi-Fi router if signal strength is weak.
  • Reset the module by holding the reset button for 5-10 seconds until the indicator light blinks rapidly, then try pairing again.
  • Рестартујте свој Wi-Fi рутер.
• Voice control (Alexa/Google Home) not working:
  • Ensure the "Homcloud" skill/action is enabled in your smart assistant app and your Homcloud account is linked.
  • Ask your smart assistant to "discover devices."
  • Check if the device is online in the Homcloud app.
  • Sometimes, power cycling the module (turning off and on the main power) can resolve connectivity issues with voice assistants.
• Shutter motor not responding correctly or stopping mid-way:
  • Verify the motor wiring connections (Up/Down) are correct as per the diagram.
  • Ensure the motor's limit switches (fine corsa) are properly set. This module controls the motor's power, but the motor itself handles its travel limits.
  • Check if the motor is receiving sufficient power.
  • If using a traditional switch, ensure it's functioning correctly.
• Module disconnects frequently:
  • Check your Wi-Fi signal strength at the module's location.
  • Ensure your Wi-Fi router is stable and not experiencing frequent outagес.
  • Ако снага уtages occur, the module should reconnect automatically once power is restored. If not, a manual reset and re-pairing might be necessary.

10. Одржавање

The Homcloud Wi-Fi Smart Shutter Module requires minimal maintenance. Keep the device free from dust and moisture. Do not attempt to open or repair the module yourself, as this will void the warranty and may pose a safety risk. For cleaning, use a dry, soft cloth.

11. Гаранција и подршка

Homcloud provides guaranteed support for its products. In addition to this comprehensive instruction manual, you can contact Homcloud support for any questions or assistance you may need regarding your device.

For support, please refer to the contact information provided in your product packaging or visit the official Homcloud webсајту.