Philips Lighting 929003195801

Philips MAUVE PIR CL252 Functional Ceiling Light

Модел: 929003195801

1. Увод

Thank you for choosing the Philips MAUVE PIR CL252 Functional Ceiling Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. This LED ceiling light features an integrated motion sensor and provides warm white illumination, ideal for functional areas within your home.

Одозго надоле view of Philips MAUVE PIR CL252 ceiling light with motion sensor

Слика 1.1: Одозго надоле view of the Philips MAUVE PIR CL252 ceiling light, highlighting the central motion sensor.

Two Philips MAUVE PIR CL252 ceiling lights installed in a hallway

Figure 1.2: Two Philips MAUVE PIR CL252 ceiling lights installed in a modern hallway, demonstrating their illumination in a functional area.

2. Безбедносне информације

Пажљиво прочитајте сва безбедносна упутства пре инсталације и употребе. Сачувајте ово упутство за будуће потребе.

  • електрична безбедност: Installation should only be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Always disconnect power at the main circuit breaker before installation, maintenance, or cleaning.
  • Руковање: Do not handle the product with wet hands. Avoid touching the light source directly when the fixture is powered on.
  • Само за унутрашњу употребу: This product is designed for indoor use (Innenbereich) only. Do not expose it to water or high humidity.
  • вентилација: Ensure adequate ventilation around the fixture. Do not cover the light fixture with any materials.
  • Оштећење: Do not use the product if it is damaged. Contact customer support for assistance.

3. Садржај пакета

Пре него што наставите са инсталацијом, проверите да ли су све компоненте присутне и неоштећене.

  • Philips MAUVE PIR CL252 Ceiling Light fixture
  • Прибор за монтажу (шрафови, зидни типлови)
  • Упутство за употребу (овај документ)
Retail packaging for Philips MAUVE PIR CL252 LED ceiling light

Figure 3.1: The retail packaging for the Philips MAUVE PIR CL252 LED ceiling light, showing key features.

4. Подешавање и инсталација

This ceiling light requires placement and electrical connection. Follow these steps carefully.

  1. Припрема: Ensure the power supply to the installation area is turned off at the main circuit breaker.
  2. Локација монтаже: Choose a suitable location on the ceiling. The fixture is designed for indoor ceiling installation.
  3. Обележавање и бушење: Use the mounting bracket (if separate) or the fixture itself as a template to mark the drilling points on the ceiling. Drill holes of appropriate size for the provided wall plugs.
  4. Ожичење: Connect the electrical wires from the ceiling to the terminals on the light fixture. Ensure correct polarity (Live, Neutral, Earth) as indicated on the fixture or in the wiring diagram. Secure all connections.
  5. Монтажа уређаја: Secure the light fixture to the ceiling using the provided screws and wall plugs. Ensure it is firmly attached and stable.
  6. Укључено: Када је инсталација завршена и сви прикључци су безбедни, вратите напајање на главном прекидачу.
Technical diagram of Philips MAUVE PIR CL252 ceiling light dimensions

Figure 4.1: Technical diagram illustrating the dimensions of the Philips MAUVE PIR CL252 ceiling light (Ø320mm diameter, 72mm height).

5. Упутство за употребу

The Philips MAUVE PIR CL252 features an integrated motion sensor for automatic illumination.

  • Активација сензора покрета: The light will automatically turn on when motion is detected within its sensing range.
  • Аутоматско искључивање: The light is designed to turn off approximately 30 seconds after motion is no longer detected. This duration is fixed and cannot be adjusted.
  • Светлосни услови: The PIR (Passive Infrared) sensor also incorporates a dusk-to-dawn sensor, meaning the light will primarily activate in low-light conditions to conserve energy.
  • Паметна контрола осветљења: This luminaire supports smart lighting control, potentially via an application. Refer to the Philips website or additional documentation for details on app compatibility and features.
Philips MAUVE PIR CL252 ceiling light with motion sensor icon

Figure 5.1: The Philips MAUVE PIR CL252 ceiling light with an overlay icon indicating its integrated motion sensor functionality.

Philips MAUVE PIR CL252 ceiling light emitting warm white light

Figure 5.2: The Philips MAUVE PIR CL252 ceiling light illuminated, demonstrating its warm white light output at 2700K.

Philips EyeComfort logo

Figure 5.3: The Philips EyeComfort logo, indicating that the product is designed for visual comfort. Consult product details for more information on flicker and stroboscopic effects.

6. Одржавање

Regular cleaning and proper care will ensure the longevity and optimal performance of your ceiling light.

  • Чишћење: Увек искључите струју пре чишћења. Користите меку, суву или благо длаку.amp cloth to wipe the surface of the fixture. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
  • Замена сијалице: This fixture uses integrated LED technology, meaning the LED light source is not user-replaceable. If the light source fails, the entire fixture may need to be replaced.
  • Одлагање поломљених сијалица: In case of accidental breakage or damage to the light source, exercise caution. Do not touch broken glass or components with bare hands. Refer to local regulations for proper disposal of broken or deteriorated light bulbs and electronic waste.

КСНУМКС. Решавање проблема

If you encounter issues with your Philips MAUVE PIR CL252, refer to the following common problems and solutions.

ПроблемМогући узрокРешење
Светлост се не пали.Нема напајања.Check circuit breaker and wall switch. Ensure proper electrical connection.
Light turns on but immediately turns off.Motion sensor obstructed or faulty.Ensure the motion sensor is clear of obstructions. If problem persists, contact support.
Светло остаје укључено непрекидно.Constant motion detected or sensor malfunction.Ensure no continuous motion is within the sensor's range. If problem persists, contact support.
Сензор покрета не детектује кретање.Sensor sensitivity issue or incorrect placement.Ensure the sensor is not blocked. Verify the light conditions are suitable for activation (e.g., not too bright).

Ако проблем и даље постоји након што сте покушали да решите ове проблеме, обратите се корисничкој служби компаније Philips.

8. Спецификације

Detailed technical specifications for the Philips MAUVE PIR CL252 Functional Ceiling Light.

ФеатуреДетаљ
Број модела929003195801
БрандПхилипс Лигхтинг
Димензије производа32 x 32 x 8.2 цм (пречник x висина)
Тежина481 г
БојаБела
МатеријалПластика (Kunststoff)
Luminaire FormПлафон
СтилеMauve with Motion Sensor
Извор напајањаАЦ/ДЦ
Специфичне употребеIndoor Use (Innenbereich)
Лигхт ТипеИнтегрисана ЛЕД
Температура боје2700К (топло бела)
Посебне карактеристикеIntegrated Motion Sensor, EyeComfort Technology
Земља пореклаСпаин

9. Рециклажа и одлагање

This product contains electronic components and should be disposed of responsibly. Do not dispose of the product with general household waste.

  • Рециклажа: Please refer to local regulations for information on recycling electronic products and light fixtures. Many regions have collection points for electrical and electronic equipment.
  • Крај живота: At the end of its life, the product should be taken to an authorized collection point for recycling to prevent potential harm to the environment and human health from uncontrolled waste disposal.

10. Гаранција и подршка

For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or visit the official Philips Lighting webсајт. Сачувајте доказ о куповини за потребе гаранције.

Philips Lighting Customer Support: ввв.пхилипс.цом/суппорт

Повезани документи - 929003195801

Преview Пхилипс ОццуСвитцх ЛРМ1070/00 ПИР Анвесенхеитссенсор Датенблатт
Датенблатт за интелигентни Пхилипс ОццуСвитцх ЛРМ1070/00 Анвесенхеитссенсор. Биетет ПИР-Тецхнологие, tagеслицхтабхангиге Сцхалтунг, интегриертес Релаис унд Децкенеинбау. Ентхалт тецхнисцхе Спезификатионен унд Абмессунген.
Преview Philips OccuSwitch LRM1070/00 Детектор покрета и прекидач за светло
Откријте Philips OccuSwitch LRM1070/00, интелигентни детектор покрета са интегрисаним прекидачем дизајниран да уштеди енергију аутоматским искључивањем светла у празним просторијама. Идеалан је за просторе до 25 м², подноси оптерећења до 6А и одликује се једноставном инсталацијом помоћу одвојивог конектора.
Преview Philips OccuSwitch LRM1070/00 SENSR MOV DET ST Детектор покрета - технички лист
Технички лист са подацима за Philips OccuSwitch LRM1070/00 SENSR MOV DET ST, детектор покрета са уграђеним прекидачем који контролише струју до 6A и покрива површину од 25 м². Укључује податке о производу и димензије.
Преview Philips CoreLine водоотпорна LED светиљка - информације о производу
Детаљне информације о водоотпорној LED светиљци Philips CoreLine, укључујући карактеристике, примене, техничке спецификације и шифре производа. Ова херметичка светиљка нуди оптималан избор за LED технологију, пружајући уштеду енергије и поуздане перформансе.
Преview Philips RoadForce BRP481 LED60 NW 33W DWL P7 0-10: Технички лист за ЛЕД светиљку велике снаге
Технички лист са подацима за Philips RoadForce BRP481 LED60 NW 33W DWL P7 0-10, високоефикасну LED светиљку са напредним карактеристикама, спецификацијама и подацима о примени. Укључује детаље о перформансама, механичким и електричним уређајима.
Преview Philips TubePoint: Асортиман високо ефикасних светиљки за саобраћајне тунеле
Истражите асортиман светиљки Philips TubePoint, пројектованих за ефикасна, исплатива и поуздана решења за осветљење у саобраћајним тунелима. Овај летак о породици производа детаљно описује карактеристике, предности, техничке спецификације и варијације модела за оптимално осветљење тунела.