BLACK+DECKER CD121K50 12V Cordless Drill Machine Driver Instruction Manual

1. Производ је готовview

The BLACK+DECKER CD121K50 is a 12V 10mm 1.3 Ah Li-ion Cordless Drill Machine Driver designed for various drilling and driving tasks. This versatile tool features a multi-torque clutch, keyless chuck, and comes with a 50-piece accessory kit, making it suitable for a wide range of home improvement and DIY projects in wood, metal, and concrete.

Figure 1: BLACK+DECKER CD121K50 Cordless Drill with Key Specifications

2. Карактеристике и компоненте производа

Упознајте се са главним деловима ваше бушилице/одвијача:

Figure 2: Labeled Components of the Cordless Drill

• Цхуцк без кључа: Allows for quick and easy bit changes without the need for a chuck key.
• 17-Position Torque Control: Provides precise power adjustment to prevent over-driving screws or damaging materials.
• Окидач променљиве брзине: Offers control over drilling and driving speed based on pressure applied.
• Forward/Reverse Slider: Changes the rotation direction for drilling, driving, and removing screws.
• Ергономска ручка: Designed for user comfort and to reduce hand fatigue during extended use.
• батерија: 12V 1.3 Ah Li-ion battery pack for cordless operation.
• Вентилациони отвори: Facilitate motor cooling during operation.
• Држач бита: Conveniently stores bits on the tool.

Укључене компоненте:

The BLACK+DECKER CD121K50 comes with a comprehensive accessory kit:

Figure 3: All Included Accessories

• 12 Volts Drill/Driver
• 1.3 Ah Ni-Cd battery pack
• пуњач
• 1 double-ended screwdriver bit
• 12 titanium-coated high-speed drill bits
• 4 бургија за дрво
• 4 wood spade bits
• 3 x 50mm screwdriver bits
• 20 x 25mm screwdriver bits
• 4 x nut drivers
• 2 x screw finders
• 1 x magnetic bit holder
• 1 kit box and warranty card

3. Подешавање

3.1 Пуњење батерије

Before first use, fully charge the battery. Connect the charger to a power outlet and insert the battery pack into the charging dock. The indicator light on the charger will show the charging status. Once fully charged, remove the battery from the charger.

Figure 4: Drill, Battery, and Charger

3.2 Инсталирање и уклањање батерије

To install the battery, align the battery pack with the base of the drill handle and slide it in until it clicks securely into place. To remove, press the battery release button and slide the battery pack out.

Figure 5: Battery Release Button

3.3 Постављање и уклањање бургија

The drill features a keyless chuck for easy bit changes:

1. To open the chuck, rotate the front collar counter-clockwise until the jaws are wide enough to insert the bit.
2. Уметните жељену бургију или одвијач у стезну главу. Уверите се да је бургија центрирана и потпуно постављена.
3. Rotate the front collar clockwise to tighten the chuck jaws firmly around the bit. Hand-tighten only; do not use tools.
4. To remove a bit, rotate the collar counter-clockwise to loosen the jaws and pull the bit out.

Figure 6: Keyless Chuck and Torque Adjustment Collar

4. Упутство за употребу

4.1 Selecting Torque Setting

The 17-position torque control collar allows you to adjust the amount of torque (rotational force) the drill applies. Rotate the collar to select the appropriate setting:

• Нижа подешавања (1-5) су за увртање малих шрафова или рад са меким материјалима.
• Medium settings (6-12) are for driving larger screws or working with medium-density materials.
• Higher settings (13-17) are for driving large screws or working with hard materials.
• Подешавање симбола бушилице је за примене бушења, обезбеђујући максимални обртни момент.

4.2 Избор правца ротације

Use the forward/reverse slider located above the trigger to select the rotation direction:

• Push the slider to the left for forward rotation (drilling and driving screws).
• Push the slider to the right for reverse rotation (removing screws or freeing jammed bits).
• Center position locks the trigger for safety during storage or bit changes.

Figure 7: Forward/Reverse Slider and Variable Speed Trigger

4.3 Покретање и заустављање

To start the drill, squeeze the variable speed trigger. The speed increases as you apply more pressure. To stop, release the trigger.

4.4 Технике бушења

When drilling, always wear appropriate safety gear. Secure your workpiece. Apply steady, even pressure. For wood, use wood drill bits or spade bits. For metal, use titanium-coated high-speed drill bits and consider using cutting oil to prolong bit life.

Слика 8: Бушење у дрво

Слика 9: Бушење у метал

4.5 Завртање шрафова

Select the appropriate screwdriver bit and torque setting. Start with a lower torque setting and increase if necessary to avoid stripping screw heads or damaging the material. Apply firm, steady pressure to keep the bit engaged with the screw head.

5. Одржавање

5.1 Чишћење

Редовно чистите спољашњост алата меком крпомamp cloth. Do not use harsh chemicals or abrasive cleaners. Keep the air vents clear of dust and debris to ensure proper motor cooling.

5.2 Одржавање батерије

To maximize battery life, store the battery in a cool, dry place away from direct sunlight. Avoid fully discharging the battery before recharging. If the tool will not be used for an extended period, charge the battery periodically.

5.3 Складиштење

Store the drill and its accessories in the provided kit box in a dry, secure location, out of reach of children. Ensure the forward/reverse slider is in the center (locked) position to prevent accidental startup.

КСНУМКС. Решавање проблема

• Алат се не покреће: Ensure the battery is fully charged and properly installed. Check that the forward/reverse slider is not in the center (locked) position.
• Reduced power or slow operation: The battery may be low on charge. Recharge the battery. If the issue persists, the battery may need replacement.
• Клизање бургије у стезној глави: Ensure the chuck is tightened securely around the bit. The bit shank should be clean and free of oil or debris.
• прегревање: Ensure air vents are clear. Reduce continuous heavy load. Allow the tool to cool down.

7. Спецификације

8. Гаранција и подршка

8.1 Информације о гаранцији

This BLACK+DECKER CD121K50 drill driver comes with a 1 година гаранције provided by the manufacturer from the date of purchase. Please retain your proof of purchase for warranty claims.

8.2 Корисничка подршка

За сва питања у вези са гаранцијом, повратне информације о производу или техничку помоћ, обратите се корисничкој служби BLACK+DECKER:

Figure 10: Customer Care Contact Information

• Телефон: 1800-203-0644 (понедељак - петак, од 10 до 5 часова, осим државних празника)
• Емаил: SBD-CUSTOMERCOMMUNICATIONS@SBDINC.COM
• ВхатсАпп: Скенирајте QR код на слици 10 или посетите https://api.whatsapp.com/send?phone=919606055835
• Произвођач: Блацк & Децкер
• увозник: Stanley Black & Decker India Private Ltd #28, Akemps, 3rd Main, 1st Cross, Ashwini Layout Koramangala Bangalore - 560047