BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light

Увод

This manual provides detailed instructions for the safe installation, operation, and maintenance of your BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

Карактеристике производа

• Интегрисани сензор покрета: Built-in PIR infrared motion detector with a 120° detection angle and a range of 10ft (semidiameter).
• Adjustable Hold Time: Selectable light-on duration of 30 seconds, 120 seconds, or 180 seconds after motion detection.
• Три режима рада:
  • АУТО режим: Light activates when motion is detected in dark conditions.
  • ОН режим: Light remains constantly on.
  • Г режим: Light activates when motion is detected in both daytime and nighttime conditions.
• Три температуре боје: Selectable color temperatures of 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White) via a toggle switch before installation.
• Ултра танак дизајн: Лов-проfile design with a diameter of 8.7 inches and a thickness of 0.99 inches, suitable for various spaces.
• Разноврсна инсталација: Can be installed as a flush mount on ceilings or walls.

Figure 1: Illustration of the three operating modes (AUTO, ON, G) and their activation conditions.

Figure 2: Detail of the color temperature toggle switch and motion sensor on the light fixture.

Садржај пакета

Пре почетка инсталације проверите да ли су све компоненте присутне:

• 1x Corded Motion Activated Ceiling Light
• 1x Mounting Hardware Package (screws, wire nuts, plastic bracket)
• 1x Упутство за употребу (овај документ)

Figure 3: Contents of the BLNAN Motion Sensor LED Ceiling Light package.

Безбедносне информације

УПОЗОРЕЊЕ: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring. Always follow local electrical codes.

• Ensure the power supply is OFF before handling any wiring.
• This fixture is designed for 120V AC power supply.
• Не покушавајте да модификујете уређај.
• Држите децу даље од области инсталације.

Подешавање и инсталација

Пратите ове кораке за правилну инсталацију:

1. Припремите се за инсталацију:
   • Искључите напајање на прекидачу пре покретања.
   • Before mounting, select your desired color temperature (3000K, 4000K, or 5000K) using the toggle switch located on the back of the fixture.
2. Инсталирајте носач за монтажу:
   • Rotate and remove the plastic mounting bracket from the light fixture.
   • Attach the plastic bracket to your existing junction box using the provided screws. The bracket is designed for junction boxes with 2.75"-3.7" apart screw holes.
3. Жичне везе:
   • Connect the wires from the light fixture to your household wiring: Black to Black (Live), White to White (Neutral), and Green to Green/Bare Copper (Ground). Secure connections with wire nuts.
   • Use the hanging rope to temporarily support the fixture during wiring.
4. Монтирајте расветно тело:
   • Пажљиво увуците све жице у разводну кутију.
   • Align the light fixture with the installed mounting bracket and rotate it clockwise until it locks securely into place.
5. Врати снагу: Поново укључите напајање на прекидачу.

Слика 4: Визуелни водич за процес инсталације.

Упутство за употребу

The light fixture features adjustable settings for operating mode and hold time. These settings are controlled by small switches located near the motion sensor on the fixture's surface.

1. Избор режима рада:
   • Locate the mode switch (labeled AUTO, ON, G).
   • Slide the switch to your desired mode:
   • АУТО: Motion and light sensor activated. Light turns on only when motion is detected in dark conditions.
   • НА: Светло остаје континуирано упаљено, без обзира на кретање или амбијентално светло.
   • G: Motion sensor activated. Light turns on when motion is detected, both during the day and at night.
2. Adjusting Hold Time:
   • Locate the hold time switch (labeled 30S, 120S, 180S).
   • Slide the switch to set how long the light remains on after motion is no longer detected:
   • 30С: 30 секунди
   • 120С: 120 секунди (2 минута)
   • 180С: 180 секунди (3 минута)

Figure 5: Switches for adjusting hold time and operating modes.

Одржавање

Regular maintenance ensures optimal performance and longevity of your LED ceiling light.

• Чишћење: Turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• ЛЕД животни век: The integrated LED light source has an average lifespan of 30,000 hours and is not user-replaceable.
• инспекција: Периодично проверавајте уређај да ли има знакова оштећења или лабавих спојева. Ако пронађете било какве проблеме, искључите напајање и консултујте квалификованог електричара.

Решавање проблема

Ако наиђете на проблеме са расветним телом, погледајте следеће уобичајене проблеме и решења:

Спецификације

Гаранција и подршка

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BLNAN webсајт. Сачувајте рачун као доказ о куповини.