JEYI I9-Seal M.2 NVMe SSD Enclosure User Manual

Увод

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JEYI I9-Seal M.2 NVMe SSD Enclosure. This device converts an NVMe M.2 solid-state drive into a portable external storage solution with high-speed USB 3.2 Gen 2 connectivity.

Садржај пакета

Молимо вас да проверите да ли су све ставке наведене у наставку укључене у ваш пакет:

• JEYI M.2 NVMe SSD Enclosure
• Термални јастучићи
• Шрафцигер
• USB-A to USB-C Cable (10Gbps)
• USB-C to USB-C Cable (10Gbps)
• Ланиард

Упутства за подешавање

Follow these steps to install your NVMe M.2 SSD into the JEYI I9-Seal enclosure:

1. Припремите кућиште: Пажљиво отворите кућиште да бисте открили унутрашњу ПЦБ плочу.
2. Нанесите термални јастучић: Peel off the protective films from both sides of a thermal pad and carefully place it onto the NVMe SSD chip area. This aids in heat dissipation.
3. Insert NVMe SSD: Align your NVMe M.2 SSD (2280 form factor only) with the M-Key slot on the PCB. Insert the SSD firmly but gently into the slot at an angle.
4. Обезбедите SSD: Once inserted, gently push down the SSD and secure it with the provided screw using the included screwdriver. Ensure the SSD is flat and securely fastened.
5. Затворите кућиште: Carefully slide the enclosure cover back into place until it clicks securely.

Упутство за употребу

Once your NVMe SSD is securely installed, connect the enclosure to your device:

1. Повежите се са уређајем: Use either the provided USB-C to USB-C cable or the USB-A to USB-C cable to connect the enclosure to a compatible USB port on your computer, smartphone, tablet, or game console.
2. Индикатор напајања: A small LED indicator on the enclosure will illuminate, signifying that the device is powered on and connected.
3. Disk Recognition: Your operating system (Windows, macOS, Linux, Android, iOS) should automatically detect the new storage device. If it's a new SSD, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before use.
4. Пренос података: You can now perform data backup, file transfers, disk upgrades, data recovery, or use it for storage expansion. The enclosure supports USB 3.2 Gen 2 speeds up to 10Gbps.

Одржавање

To ensure optimal performance and longevity of your JEYI I9-Seal enclosure:

• Управљање топлотом: Алуминијум цasing and thermal pads are designed for efficient heat dissipation. During prolonged high-speed data transfers, the enclosure may become warm to the touch. This is normal and indicates effective heat transfer from the SSD.
• Чишћење: Use a soft, dry cloth to clean the exterior of the enclosure. Avoid using liquid cleaners or solvents.
• Складиштење: Када се не користи, кућиште чувајте на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.
• Нега каблова: Handle the USB cables carefully. Avoid sharp bends or excessive pulling to prevent damage.

Решавање проблема

Спецификације

Гаранција и подршка

For warranty information or technical support, please refer to the official JEYI website or contact their customer service directly. Details regarding specific warranty periods and support channels are typically provided with your purchase documentation or on the manufacturer's webсајту.

Произвођач: ЈЕИИ

Webсајт: Visit the JEYI Store on Amazon