Reloop RT-1 BT Turntable User Manual

1. Увод и крајview

The Reloop RT-1 BT is a versatile belt-drive turntable designed for both aspiring DJs and Hi-Fi enthusiasts. It combines classic vinyl playback with modern wireless convenience, featuring integrated Bluetooth for seamless connection to compatible speakers. Its robust construction, including a sturdy chassis and precision-cast platter, ensures stable and distortion-free audio reproduction. The turntable comes equipped with a pre-assembled Ortofon OM Black magnetic pickup system and an integrated phono pre-amplifier, offering flexibility for various audio setups.

2. Безбедносна упутства

Please read and understand all safety instructions before operating the Reloop RT-1 BT turntable. Retain this manual for future reference.

• Напајање: Користите само приложени адаптер за напајање. Уверите се да је јачина звукаtage matches your local power supply. Disconnect power during thunderstorms or when unused for extended periods.
• Вода и влага: Do not expose the unit to rain, moisture, or liquids. Avoid placing objects filled with liquids, such as vases, on or near the turntable.
• вентилација: Ensure adequate ventilation. Do not block ventilation openings. Install the unit according to the manufacturer's instructions.
• топлота: Не постављајте у близини извора топлоте као што су радијатори, грејни регистри, пећи или други уређаји (укључујући ampлифиерс) који производе топлоту.
• Чишћење: Чистите само сувом крпом. Избегавајте употребу течних или аеросолних средстава за чишћење.
• Сервисирање: Не покушавајте сами да сервисирате овај производ. Сва сервисирања препустите квалификованом сервисеру. Сервисирање је потребно када је уређај оштећен на било који начин, као што је оштећење кабла за напајање или утикача, просипање течности или упадање предмета у уређај, излагање киши или влази, не ради нормално или је испуштен.
• Пласман: Place the turntable on a stable, level surface to prevent vibrations and ensure proper operation.

3. Садржај пакета

Carefully unpack your Reloop RT-1 BT turntable and verify that all the following components are included:

• Reloop RT-1 BT Turntable Unit
• Алуминиум Платтер
• Belt Drive (pre-installed or separate)
• Reloop OM Black Pickup System (by Ortofon, pre-assembled on headshell)
• Хеадсхелл
• Фелт Мат
• Dust Cover (removable acrylic)
• Противтежа
• Audio Cable (RCA)
• Center Adapter (for 45 RPM records)
• Повер Суппли Унит
• Упутство за употребу

4. Подешавање

Follow these steps to set up your Reloop RT-1 BT turntable for the first time.

4.1 Распакивање и постављање

1. Пажљиво уклоните све компоненте из паковања.
2. Place the turntable unit on a stable, level surface away from direct sunlight, heat sources, and excessive dust.

4.2 Инсталација плоче и каиша

1. Place the aluminum platter onto the spindle of the turntable.
2. If the belt is not pre-installed, carefully loop the drive belt around the motor pulley and the inner rim of the platter.
3. Поставите простирку од филца на врх тањира.

Image: The Reloop RT-1 BT turntable with its aluminum platter and S-shaped tonearm, highlighting the universal SME connection and cast platter.

4.3 Подешавање ручице и кертриџа

1. The Ortofon OM Black pickup system is pre-assembled on the headshell. Attach the headshell to the tonearm.
2. Install the counterweight onto the rear of the tonearm. Adjust it to balance the tonearm horizontally. Refer to the Ortofon manual for precise tracking force settings (typically 1.5-2.0 grams for OM Black).
3. Adjust the anti-skating dial to match the tracking force setting.

Image: The Reloop RT-1 BT turntable shown with its removable acrylic dust cover and the included Reloop OM Black pickup system by Ortofon.

4.4 Аудио везе

The RT-1 BT features an integrated phono pre-amplifier, allowing you to connect it directly to a line-level input on your amplifier or active speakers. You can also use the PHONO output if your ampЛајфајер има посебан фоно улаз.

1. Connect the RCA audio cable from the turntable's output to the appropriate input on your ampлифиер или активни звучници.
2. Select either PHONO or LINE output using the switch on the rear panel, depending on your ampдопринос корисника за спасавање.

Слика: Позади view of the Reloop RT-1 BT turntable, illustrating the integrated phono pre-amplifier and its output connections.

4.5 Прикључак за напајање

1. Connect the power supply unit to the DC input on the turntable.
2. Укључите адаптер за напајање у одговарајућу зидну утичницу.

5. Упутство за употребу

This section details how to operate your Reloop RT-1 BT turntable.

5.1 Пуштање плоче

1. Place a record on the felt mat. For 7-inch records, use the included center adapter.
2. Select the correct speed (33 1/3 RPM for LPs, 45 RPM for singles) using the speed selector switch.
3. Притисните дугме START/STOP да бисте започели ротацију плоче.
4. Gently lift the tonearm using the cueing lever and position the stylus over the desired groove of the record.
5. Lower the cueing lever to slowly drop the stylus onto the record.
6. To stop playback, lift the tonearm using the cueing lever, return it to the tonearm rest, and press the START/STOP button.

Image: Close-up of the Reloop RT-1 BT turntable's controls, featuring the precise pitch adjustment slider (+/-10%) and the two-speed selector (33 1/3 & 45 RPM).

5.2 Pitch Adjustment

Use the pitch slider to fine-tune the playback speed by +/-10% for precise beat matching or personal preference.

5.3 Bluetooth повезивање

The RT-1 BT allows wireless audio streaming to Bluetooth-enabled speakers or stereo systems.

1. Ensure your Bluetooth speaker or receiver is in pairing mode.
2. Press and hold the Bluetooth pairing button on the RT-1 BT (refer to the diagram in your quick start guide for exact location). The Bluetooth indicator light will flash.
3. Once successfully paired, the indicator light will remain solid. Audio from the turntable will now stream wirelessly to your connected device.

Image: The Reloop RT-1 BT turntable demonstrating smart connectivity, wirelessly streaming audio to two Bluetooth speakers.

6. Одржавање

Regular maintenance will help ensure the longevity and optimal performance of your turntable.

• Чишћење јединице: Use a soft, dry, lint-free cloth to wipe the turntable chassis and dust cover. Avoid abrasive cleaners or solvents.
• Брига о оловци: Periodically clean the stylus using a soft brush designed for stylus cleaning, brushing gently from back to front. A dirty stylus can degrade sound quality and damage records.
• Поклопац за прашину: Keep the dust cover closed when the turntable is not in use to protect it from dust and debris.
• Преглед појасева: Occasionally inspect the drive belt for signs of wear, stretching, or cracking. Replace the belt if necessary to maintain accurate speed.

КСНУМКС. Решавање проблема

If you encounter issues with your Reloop RT-1 BT, refer to the following common problems and solutions.

If the problem persists after trying these solutions, please contact Reloop customer support or your retailer.

8. Спецификације

9. Гаранција и подршка

For warranty information, please refer to the warranty card included with your product or visit the official Reloop website. For technical support, troubleshooting beyond this manual, or service inquiries, please contact your authorized Reloop dealer or Reloop customer service directly. Keep your proof of purchase for warranty claims.