WALI FTM-2 Full Motion TV Wall Mount Instruction Manual

1. Производ је готовview

The WALI FTM-2 Full Motion TV Wall Mount is designed to securely hold most flat and curved screen televisions ranging from 32 to 70 inches. This mount offers extensive adjustability, including tilt, swivel, and extension, allowing for optimal viewing angles from various positions in a room. Constructed from reinforced cold-rolled steel, it ensures durability and stability for your television.

2. Важне информације о безбедности

УПОЗОРЕЊЕ: Read all instructions carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, consult a qualified installer. Improper installation may cause serious injury or damage.

• Капацитет тежине: Не прекорачујте максималну носивост од 88 фунти (40 кг). Овај носач је намењен за употребу само са назначеним максималним тежинама. Употреба са производима тежим од назначених максималних тежина може довести до нестабилности и могуће повреде.
• Тип зида: This mount is designed for installation on vertical wood studs, solid concrete walls, or brick walls. НЕМОЈТЕ постављати само на суви зид. Уверите се да површина за монтажу може безбедно да подржи комбиновану тежину опреме и свих прикључених уређаја.
• ВЕСА компатибилност: Ensure your TV's VESA mounting pattern is within the supported range (100x100mm to 400x400mm).
• Алати: Use appropriate tools for installation. Always wear safety gear, including eye protection.
• деца: Држите децу даље од места инсталације. Мали делови могу представљати опасност од гушења.

Image: The mount is constructed from reinforced cold-rolled steel, tested to support up to 88 lbs, ensuring structural integrity and safety for your television.

3. Садржај пакета

Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact WALI customer support.

• WALI FTM-2 TV Wall Mount (1 unit)
• Mounting Hardware Kit (various screws, washers, spacers, anchors)
• Кориснички приручник (овај документ)

Image: All necessary hardware for installation is included, such as various bolts, washers, spacers, and wall anchors. A spirit level is also provided to assist with accurate mounting.

4. Провера компатибилности

Before installation, confirm your television and wall meet the following requirements:

• ТВ величина: Compatible with most 32 to 70 inch flat or curved screen TVs.
• Тежина телевизора: Your TV must weigh no more than 88 lbs (40 kg).
• ВЕСА узорак: The mounting holes on the back of your TV must match VESA patterns from 100x100mm to 400x400mm.
• Тип зида: Suitable for 12" or 16" wood studs, concrete walls, and brick walls. Not for drywall-only installation.

Image: This diagram outlines the four key compatibility checks: TV weight (up to 88 lbs), VESA pattern (100x100mm to 400x400mm), TV size (32-70 inches), and suitable wall types (wood studs, concrete, brick). Installation on drywall alone is not supported.

5. Упутства за инсталацију

Follow these steps carefully for a secure installation. It is recommended to have two people for installation.

Корак 1: Причврстите носач на зид

1. Locate the desired mounting position on your wall. Use a stud finder to locate wood studs if applicable.
2. Mark the drill holes for the wall plate. Ensure the marks are level using a spirit level.
3. Drill pilot holes at the marked locations. For wood studs, use a 5/32 inch (4mm) drill bit. For concrete/brick walls, use a 3/8 inch (10mm) drill bit and insert wall anchors.
4. Attach the wall plate to the wall using the appropriate lag bolts and washers. Tighten securely.

Step 2: Attach Plate to TV

1. Положите телевизор екраном надоле на меку, чисту површину како бисте спречили огреботине.
2. Идентификујте ВЕСА рупе за монтажу на задњој страни телевизора.
3. Изаберите одговарајуће завртње, подлошке и одстојнике из комплета хардвера који одговарају отворима за монтажу вашег телевизора.
4. Attach the TV brackets to the back of your TV. Ensure they are securely fastened but do not overtighten.

Step 3: Hang TV on Bracket

1. With assistance, carefully lift the TV and hook the TV brackets onto the wall plate.
2. Уверите се да је телевизор центриран и раван.
3. Secure the TV to the wall plate using the safety screws or locking mechanisms provided.

6. Adjustments (Operating)

The WALI FTM-2 mount offers flexible adjustments to achieve your desired viewугао уласка.

• Нагиб: The TV can be tilted +3° upwards and -15° downwards. Loosen the tilt adjustment knobs on the TV brackets, adjust to the desired angle, and then re-tighten the knobs.
• Окретни: The mount allows for a ±60° swivel (left and right) depending on TV size and wall distance. Gently push or pull the TV to the desired swivel angle.
• Нивелисање: After installation, if the TV is slightly unlevel, you can adjust it by ±3°. Loosen the leveling screws, adjust the TV, and re-tighten.
• Продужење/увлачење: The mount extends from 2.6 inches (6.6 cm) to 14 inches (35.6 cm) from the wall. Gently pull the TV forward or push it back to adjust the distance.

Image: This diagram shows the full range of motion: 15 degrees of tilt, 60 degrees of swivel, extension up to 14 inches from the wall, and 4 degrees of leveling adjustment for a perfect viewинг искуство.

7. Одржавање

Редовно одржавање осигурава дуготрајност и безбедан рад вашег зидног носача за телевизор.

• Периодичне провере: Periodically check that all screws and connections are tight and secure. Re-tighten if necessary.
• Чишћење: Очистите носач меком, сувом крпом. Избегавајте абразивна средства за чишћење или раствараче који би могли оштетити завршну обраду.
• Покретних делова: The articulating arms are designed for smooth movement. No lubrication is typically required. If movement becomes stiff, check for obstructions or loose components.

КСНУМКС. Решавање проблема

Ако наиђете на проблеме током или након инсталације, погледајте следеће уобичајене проблеме и решења:

• ТВ није раван: Use the leveling adjustment feature (refer to Section 6) to correct the angle. Ensure the wall plate was installed level initially.
• Носач делује нестабилно: Double-check all wall and TV attachment screws to ensure they are securely tightened. Verify that the wall type is appropriate and that the TV weight does not exceed the mount's capacity.
• ТВ не одговара носачу: Re-check your TV's VESA pattern against the mount's specifications (refer to Section 4). Ensure you are using the correct screws and spacers for your TV model.
• Difficulty moving the arms: Ensure no cables are snagged or obstructing movement. Check for any overtightened bolts that might restrict articulation.

If problems persist, contact WALI customer support for assistance.

9. Спецификације

10. Гаранција и корисничка подршка

WALI products are designed for quality and reliability. For warranty information or technical assistance, please contact WALI customer support.

WALI is committed to providing dedicated product support and aims to respond to inquiries within 12 hours.

• Контакт: Refer to the WALI official webсајт или паковање производа за најновије контакт информације.
• Доказ о куповини: Сачувајте доказ о куповини за гаранцијске захтеве.