Упутство за употребу АКСИС К6225-ЛЕ ПТЗ камере

1. Увод

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the Axis Communications AXIS Q6225-LE PTZ Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety. This camera is designed for robust outdoor surveillance in challenging conditions.

2. Безбедносне информације

Observe the following safety precautions to prevent damage to the product or injury to personnel:

• Инсталација: Installation must be performed by qualified personnel in accordance with all local and national electrical and building codes.
• Напајање: Use only the specified power supply (60 watts) for this device. Ensure the power source is stable and meets the camera's requirements.
• Окружење: The camera is designed for outdoor use. However, avoid exposing it to extreme conditions beyond its specified operating range.
• Чишћење: Искључите напајање пре чишћења. Користите меку, суву крпу. Не користите течна или аеросолна средства за чишћење.
• Измене: Do not attempt to modify or disassemble the camera. This may void the warranty and pose safety risks.

3. Садржај пакета

Проверите да ли су све ставке присутне у пакету:

• АКСИС К6225-ЛЕ ПТЗ камера
• Упутство за инсталацију
• Монтажни носач и хардвер
• Network Cable Connector
• Documentation and Software CD (if applicable)

Слика 1: AXIS Q6225-LE PTZ Camera. This image displays the grey-colored PTZ camera unit, highlighting its robust housing and integrated lens system, designed for outdoor surveillance.

4. Подешавање и инсталација

4.1 Монтирање камере

The AXIS Q6225-LE is designed for wall mount installation. Ensure the mounting surface is strong enough to support the camera's weight and withstand environmental conditions.

1. Изаберите одговарајуће место за монтажу које пружа жељено поље view и налази се у домету прикључака за струју и мрежу.
2. Use the provided mounting template to mark drill holes on the wall.
3. Drill pilot holes and secure the mounting bracket using appropriate screws and anchors.
4. Attach the camera to the mounting bracket, ensuring it is firmly locked in place.

4.2 Напајање и мрежна веза

Connect the camera to power and network as follows:

• Снага: Connect the power cable to a 60-watt power source. Ensure the connection is secure and weatherproof.
• Мрежа: Connect an Ethernet cable from your network switch or router to the camera's network port. The camera supports Wi-Fi for wireless communication. Refer to the network configuration section for wireless setup.

4.3 Почетна конфигурација

After physical installation and connection, access the camera's web interface for initial configuration:

1. Отвори а web browser on a computer connected to the same network as the camera.
2. Enter the camera's IP address in the browser's address bar. If the IP address is unknown, use the AXIS IP Utility tool to discover it.
3. Follow the on-screen prompts to set up a new password for the administrator account.
4. Configure basic network settings, date/time, and video stream settings.

5. Руковање камером

5.1 Контрола панорамирања, нагињања и зумирања (PTZ)

The AXIS Q6225-LE camera features full PTZ capabilities, allowing remote adjustment of its viewing angle and zoom level. Control is typically performed via the camera's web interface or compatible video management software (VMS).

• Пан: Rotate the camera horizontally to cover a wider area.
• Нагиб: Adjust the camera vertically to view objects at different heights.
• Оптички зум: Use the optical zoom feature to magnify distant objects without loss of image quality.

5.2 Детекција покрета и упозорења

The camera supports motion-only alerts. Configure motion detection zones and sensitivity settings in the web interface to trigger recordings or notifications when movement is detected.

5.3 Infrared (IR) Illumination

Equipped with infrared light sources, the camera provides clear video surveillance in low-light or complete darkness. IR illumination activates automatically or can be manually controlled.

6. Одржавање

6.1 Чишћење

Regular cleaning of the camera lens and housing is recommended to ensure optimal performance, especially in dusty or harsh environments.

• Gently wipe the lens with a soft, lint-free cloth. For stubborn dirt, use a lens cleaning solution specifically designed for optical surfaces.
• Очистите кућиште камере помоћу огласаamp крпу. Избегавајте абразивна средства за чишћење или раствараче.

6.2 Ажурирања фирмвера

Periodically check the Axis Communications website for firmware updates. Keeping the camera's firmware up-to-date ensures access to the latest features, security enhancements, and bug fixes.

КСНУМКС. Решавање проблема

This section addresses common issues you might encounter with your AXIS Q6225-LE camera.

8. Спецификације

9. Гаранција и подршка

For warranty information and technical support, please refer to the official Axis Communications webсајт или контактирајте овлашћеног продавца. Сачувајте рачун као доказ о куповини.

Онлине ресурси: ввв.акис.цом