SIRUI Macro Focusing Rail MS18 Instruction Manual

1. Увод

The SIRUI Macro Focusing Rail MS18 is designed to provide precise camera-to-subject distance control for macro photography. It features a quick adjustment button, fine-tuning capabilities, a 360° rotating head, and detachable feet, making it a versatile tool for various shooting scenarios, including focus stacking.

2. Компоненте и карактеристике производа

Слика 2.1: Готовоview of the MS18 Macro Focusing Rail with key components labeled.

• Movement Twist Knob: Used for precise, minor adjustments of the camera position along the rail.
• Quick Release Plate Locking Knob: Secures the quick release plate, holding the camera firmly in place.
• Rotating Head Lock: Locks the 360° rotating head at the desired angle.
• Fast Movement Button: Allows for rapid, large adjustments of the camera position when pressed and held.
• Adjustment Knob (Thumb-Screw Knob): Provides fine movement control, approximately 1.25mm per revolution.
• Detachable Feet: Four removable feet for stable tabletop use.
• Arca-Swiss Base: Integrated base for mounting on Arca-Swiss compatible clamps or tripods.
• 1/4" Screw: Standard camera mounting screw on the quick release plate.
• 3/8" Screw: Threaded hole on the bottom for tripod mounting.

Слика 2.2: Engraved index marks on both sides of the rail for precise adjustments, showing a total length of 180mm and a travel range of 170mm.

Слика 2.3: The MS18 Macro Focusing Rail features solid aluminum construction, a maximum load capacity of 10 kg (22.05 lbs), and weighs 440g (0.97 lbs).

3. Упутства за подешавање

1. Причвршћивање камере:
   • Ensure the quick release plate locking knob is loosened.
   • Attach your camera to the quick release plate using the 1/4" screw. Tighten securely.
   • Slide the quick release plate with the camera onto the rail's clamp.
   • Tighten the quick release plate locking knob to secure the camera.
2. Опције монтаже:
   • Употреба стола: Ensure the four detachable feet are securely attached to the bottom of the rail for stable placement on flat surfaces.
   • Монтажа статива:
     • The rail can be mounted directly onto a tripod using the 3/8" threaded hole on its base.
     • Alternatively, if your tripod head has an Arca-Swiss compatible clamp, the integrated Arca-Swiss base of the rail can be used for mounting.
3. Dual-Axis (4-Way) Adjustment (Optional):
   • For four-way adjustment (horizontal and vertical movement), two MS18 macro rails can be stacked. Mount the first rail horizontally onto a tripod.
   • Mount the second rail vertically onto the first rail's Arca-Swiss clamp.
   • Attach the camera to the second (vertical) rail.

Слика 3.1: The detachable feet allow for tabletop shooting, or they can be removed for direct mounting onto a tripod via the 3/8" thread or Arca-Swiss slot.

Слика 3.2: Stacking two MS18 rails enables dual-axis movement for advanced macro photography setups.

4. Упутство за употребу

4.1 Adjusting Camera Position

• Брзо подешавање: For large movements, press and hold the Fast Movement Button. This disengages the lead screw, allowing you to slide the camera carriage freely along the rail. Release the button to re-engage for fine control.
• Мање подешавање: For precise, small movements, turn the Adjustment Knob (thumb-screw knob). Each full revolution moves the camera approximately 1.25mm.
• Fine-Tuning Tactile Sensation: The side knob allows you to adjust the resistance and tactile feel of the movement, enhancing precision.

Слика 4.1: The MS18 offers three modes for adjusting camera position: Fast Movement (push and hold button), Minor Movement (accurate to 0.01mm), and Fine Movement (1.25mm per revolution).

4.2 Using the 360° Rotating Head

• The integrated rotating head allows for 360° rotation of the camera.
• Loosen the Rotating Head Lock to adjust the camera to your desired angle (e.g., 0°, 90°, 180°, 270°, 360°).
• Once the desired angle is achieved, tighten the Rotating Head Lock to secure the camera position.

Слика 4.2: The 360° rotating head allows for versatile camera angle adjustments.

5. Одржавање

• Чишћење: Use a soft, dry cloth to wipe down the rail and its components. Avoid abrasive cleaners or solvents that could damage the finish or moving parts.
• подмазивање: The lead screw mechanism is designed for smooth operation. Avoid applying excessive lubricants unless specifically recommended by the manufacturer, as this can attract dust and debris.
• Складиштење: Store the macro rail in a clean, dry environment, away from extreme temperatures and humidity.
• инспекција: Periodically check all screws and knobs to ensure they are securely tightened.

КСНУМКС. Решавање проблема

7. Спецификације

8. Гаранција и подршка

For warranty information and technical support, please refer to the official SIRUI website or contact your local SIRUI distributor. Keep your purchase receipt as proof of purchase for any warranty claims.

Manufacturer: SIRUI