Rolls MX401 4-канални XLR микрофонски/линијски стерео миксер - упутство за употребу

1. Увод

The Rolls MX401 is a compact and versatile 4-channel XLR Mic/Line Stereo Mixer designed for robust live and studio mixing applications. This manual provides detailed instructions to ensure proper setup, operation, and maintenance of your MX401 unit, allowing you to achieve optimal audio performance.

2. Производ је готовview

The MX401 features four independent XLR inputs, each with dedicated controls for level, pan, and mic/line-level switching. It also includes individual phantom power for condenser microphones. The unit offers balanced XLR outputs and a 3.5mm stereo output for flexible connectivity. A convenient clip indicator light assists in setting appropriate input levels.

Кључне карактеристике:

• 4 Balanced XLR Inputs
• Individual Level Control per Channel
• Individual Pan Control per Channel
• Mic/Line Level Switching per Channel
• Individual Phantom Power per Channel
• Master Output Level Control
• Свјетло индикатора копче
• 2 Balanced XLR Outputs
• 1 x 3.5mm Stereo Output
• DC Power Supply or 9V Battery Operation

Слика 1: Одозго надоле view of the Rolls MX401 mixer, showing input and output labels.

Figure 2: Front panel of the Rolls MX401 mixer, displaying channel controls, output level, and power switch.

3. Подешавање

3.1 Напајање јединице

The MX401 can be powered using the included DC power supply or two 9V batteries. Ensure the unit is switched OFF before connecting power.

• ДЦ снага: Connect the included DC power supply to the 'VDC' input jack on the front panel. Plug the power supply into an appropriate AC outlet.
• Снага батерије: Open the battery compartment on the side of the unit and insert two fresh 9V batteries, observing correct polarity. Close the compartment securely.

3.2 Connecting Microphones and Line Inputs

The MX401 features four XLR inputs, each capable of accepting either microphone or line-level signals.

1. Connect your microphones or line-level devices to the XLR INPUTs (CH 1-4) on the rear panel.
2. For each channel, use the МИЦ / ЛИНЕ switch to select the appropriate input level:
• Подесите на МИЦ for microphones.
• Подесите на ЛИНЕ for line-level devices (e.g., keyboards, CD players).
3. If using condenser microphones, activate ФАНТОМСКА СНАГА for the respective channel by pressing the PHANTOM POWER button. The LED will illuminate when active.

3.3 Повезивање излаза

The MX401 provides balanced XLR outputs and a 3.5mm stereo output.

• Connect your main audio system (e.g., power amplifier, recording device) to the balanced XLR OUTPUTS (LEFT, RIGHT) на задњој плочи.
• For connecting to consumer-grade audio equipment or headphones, use the 3.5mm STEREO OUTPUT прикључак на предњој плочи.

4. Упутство за употребу

4.1 Укључивање/искључивање

Након што су све везе успостављене, пребаците ПОВЕР ОН-ОФФ toggle on the front panel to the ON position. The 'pwr' LED will illuminate.

4.2 Контроле канала

Each of the four input channels (CH 1-4) has independent controls:

• НИВО: Adjusts the input gain for the respective channel. Start with this knob fully counter-clockwise and slowly increase it until the desired volume is achieved without clipping.
• ПАН: Controls the stereo positioning of the channel's signal between the Left and Right outputs. Turn clockwise for more Right signal, counter-clockwise for more Left signal, and center for an even spread.
• МИЦ/ЛИНЕ прекидач: Selects between microphone-level and line-level input sensitivity.
• PHANTOM POWER Button: Activates +48V phantom power for condenser microphones connected to that channel.

4.3 Контрола излазног нивоа

The master output level is controlled by the ОУТПУТ ЛЕВЕЛ knob on the front panel. Adjust this to set the overall volume of the mixed signal sent to the outputs.

4.4 Clip Indicator

Тхе ЦЛИП LED on the front panel illuminates when the input or output signal is too high, indicating potential distortion. If the CLIP LED lights up, reduce the corresponding channel LEVEL or the master OUTPUT LEVEL until the LED no longer illuminates during peak signal levels.

5. Одржавање

To ensure the longevity and optimal performance of your Rolls MX401, follow these maintenance guidelines:

• Чишћење: Користите меку, суву крпу за чишћење спољашњости уређаја. Избегавајте употребу абразивних средстава за чишћење, растварача или воскова, јер они могу оштетити завршну обраду.
• Складиштење: Када се миксер не користи дуже време, чувајте га на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.
• Замена батерије: If using battery power, replace batteries when the 'pwr' LED dims or the unit ceases to function. Remove batteries if the unit will not be used for a long time to prevent leakage.
• вентилација: Ensure proper ventilation around the unit to prevent overheating. Do not block any ventilation openings.

КСНУМКС. Решавање проблема

If you encounter issues with your MX401, refer to the following common troubleshooting steps:

• Нема напајања:
  • Check if the DC power supply is securely connected and plugged into a working outlet.
  • If using batteries, ensure they are fresh and inserted with correct polarity.
  • Verify the POWER ON-OFF switch is in the ON position.
• Нема звука:
  • Confirm all input and output cables are securely connected.
  • Check that the input device is powered on and sending a signal.
  • Ensure channel LEVEL knobs and the master OUTPUT LEVEL knob are turned up.
  • Verify the MIC/LINE switches are set correctly for your input devices.
  • If using condenser microphones, ensure PHANTOM POWER is activated for the respective channels.
  • Check the volume and input selection on your connected audio system.
• Distorted Sound / Clipping:
  • If the CLIP LED illuminates, reduce the corresponding channel LEVEL or the master OUTPUT LEVEL until it no longer lights up.
  • Ensure the MIC/LINE switches are correctly set. Using MIC setting for a line-level device can cause distortion.
• Зујање или шум:
  • Уверите се да су сви каблови у добром стању и правилно заштићени.
  • Try using balanced XLR cables for inputs and outputs to minimize noise.
  • Avoid running audio cables parallel to power cables.

7. Спецификације

8. Гаранција и подршка

For warranty information, technical support, or service inquiries regarding your Rolls MX401 mixer, please refer to the documentation included with your purchase or visit the official Rolls website. Contacting the manufacturer directly will provide the most accurate and up-to-date assistance.