Sarmert 2effef59-abfe-4089-bf05-88e34cb94bb0

Sarmert 3-Lead Hard-Wire Kit for Micro-USB Dash Cams

Упутство за инсталацију и рад

1. Увод

This manual provides detailed instructions for the installation and operation of the Sarmert 3-Lead Hard-Wire Kit. This kit is designed to provide continuous power to your Micro-USB compatible dash camera, enabling features such as 24-hour parking monitoring and low voltage protection. It converts 12V-24V vehicle power to a stable 5V/2.5A output for your device.

Sarmert 3-Lead Hard-Wire Kit components

Слика 1: Завршеноview of the Sarmert 3-Lead Hard-Wire Kit and included fuse taps.

2. Производ је готовview и карактеристике

The Sarmert Hard-Wire Kit ensures your dash camera operates reliably with advanced power management features.

Кључне карактеристике:

Садржај пакета:

Sarmert Hard-Wire Kit package contents

Figure 2: Contents of the Sarmert Hard-Wire Kit package.

Sarmert 3-Lead Hard-Wire Kit with protection features

Figure 3: The 3-lead hard-wire kit provides multiple protections including battery drain, over-current, short-circuit, reverse connection, and overheat protection.

3. Подешавање и инсталација

Proper installation is crucial for the hard-wire kit's functionality. If you are unfamiliar with vehicle electrical systems, it is recommended to seek professional assistance.

Дијаграм ожичења:

The hard-wire kit consists of three main wires:

Sarmert Hard-Wire Kit box with wiring labels

Figure 4: Hard-wire kit control box showing input and output cables, and connections for GND, ACC, and BAT+.

Кораци инсталације:

  1. Пронађите своју кутију са осигурачима: Refer to your vehicle's owner's manual to find the location of the fuse box. Common locations include under the dashboard, in the glove compartment, or under the hood.
  2. Identify Fuse Slots: Using a circuit tester, identify a fuse slot that provides ACC power (on with ignition) for the Red wire and a fuse slot that provides constant BAT+ power (always on) for the Yellow wire.
  3. Select Correct Fuse Type: Choose the appropriate fuse tap from the kit that matches the fuse type in your vehicle's fuse box.
  4. Connect Wires to Fuse Taps: Insert the Red and Yellow wires into their respective fuse taps. Insert the original fuse into the lower slot of the fuse tap and a new fuse (matching the original's amperage) into the upper slot for the hard-wire kit.
  5. Insert Fuse Taps: Plug the fuse taps into the identified ACC and BAT+ fuse slots.
  6. Locate a Ground Point: Connect the Black (GND) wire to a secure metal bolt or screw on the vehicle's chassis that is free of paint or rust.
  7. Путни каблови: Carefully route the Micro-USB output cable to your dash camera, ensuring it does not interfere with driving controls or airbags. Conceal the cable behind trim panels for a clean installation.
  8. Повежите се са Дасх камером: Plug the Micro-USB connector into your dash camera.
  9. Тест систем: Start your vehicle to ensure the dash cam powers on. Turn off the vehicle and remove the key to verify the parking monitor mode activates (if enabled on your dash cam).
Sarmert Hard-Wire Kit installation guide steps in a car

Figure 5: Visual guide for the hard-wire kit installation process within a vehicle.

4. Упутство за употребу

Parking Monitor Mode:

Once correctly installed, the hard-wire kit enables your dash camera's parking monitor function. When your vehicle is turned off, the kit continues to supply power from the vehicle battery, allowing the dash cam to record in parking mode (e.g., time-lapse or motion detection, depending on your dash cam's features).

Лов Волtagе Заштита:

The hard-wire kit features an integrated low voltage protection system to prevent excessive drain on your vehicle's battery. If the vehicle battery voltage drops below a preset threshold, the kit will automatically cut power to the dash camera.

To adjust the protection voltage, press and hold the '+' or '-' buttons on the hard-wire kit box for 3 seconds to display the current setting, then use the buttons to select the desired voltage. The digital display on the hard-wire kit box will show the current voltagе подешавање.

Sarmert Hard-Wire Kit low voltage protection settings

Слика 6: Ниска запреминаtage protection thresholds for 12V and 24V batteries.

5. Одржавање

КСНУМКС. Решавање проблема

ПроблемМогући узрокРешење
Камера у аутомобилу се не укључује.Loose connection, blown fuse, incorrect wiring, vehicle battery too low.Check all connections. Inspect fuses in fuse taps and replace if blown. Verify wiring (GND, ACC, BAT+). Check vehicle battery voltage.
Parking monitor mode not activating.Dash cam setting not enabled, incorrect BAT+ connection, low voltagе заштита активирана.Ensure parking mode is enabled in your dash cam's settings. Verify the Yellow (BAT+) wire is connected to a constant power source. Check if low voltage protection has cut power.
Акумулатор возила се брзо празни.Лов волtage protection set too low, dash cam consuming too much power in parking mode.Adjust the low voltage protection setting to a higher value. Consider using a dash cam with more efficient parking mode options (e.g., motion detection only).
Волtage display on kit box is off.Проблем са напајањем, унутрашња грешка.Ensure the kit is receiving power. If the issue persists, contact customer support.
Micro-USB connector does not fit.Incompatible dash cam port (e.g., USB-C, Mini-USB).This kit is designed for Micro-USB ports only. Verify your dash cam's port type.
Sarmert Hard-Wire Kit universal compatibility with Micro USB

Figure 7: The hard-wire kit is compatible with Micro-USB devices, not USB-C or Mini-USB.

7. Спецификације

ФеатуреДетаљ
Улазни волtageЈедносмерна струја 12V - 24V
Оутпут ВолtageДЦ 5В
Излазна струја2.5А Мак
Тип конектораМицро-УСБ
Лов Волtage Protection (12V)11.6V / 12.0V / 12.2V / 12.4V (Adjustable)
Лов Волtage Protection (24V)23.6V / 24.0V / 24.4V / 24.8V (Adjustable)
Дужина улазног каблаApproximately 1000mm ± 50mm
Дужина излазног каблаApproximately 2500mm ± 50mm
Димензије производа14.5 x 9 x 5 cm; 210 g (Overall package dimensions)

8. Гаранција и подршка

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Sarmert customer service directly. Keep your proof of purchase for any warranty claims.

You can visit the Sarmert store for more information: Sarmert Store

Повезани документи - 2effef59-abfe-4089-bf05-88e34cb94bb0

Преview Упутство за употребу Sarmert C3 4K камере за аутомобил | Инсталација, карактеристике и решавање проблема
Свеобухватно корисничко упутство за Sarmert C3 4K камеру за аутомобил. Сазнајте више о инсталацији, функцијама као што су GPS, WiFi, режими паркирања и пронађите савете за решавање проблема.
Преview Упутство за употребу Sarmert DC21: Подешавање, карактеристике и рад
Свеобухватно упутство за употребу за Sarmert DC21 камеру за аутомобил. Сазнајте више о инсталацији, општим подешавањима, управљању видео записима, гласовним упутствима и решавању проблема.
Преview Sarmert M572 4K Dash Cam User Manual
Comprehensive user manual for the Sarmert M572 4K dash cam. Learn about installation, operation, 5G WiFi connectivity, dual-channel recording, and advanced features for optimal vehicle surveillance.
Преview Упутство за употребу камере за аутомобил Sarmert C1 5K
Свеобухватно корисничко упутство за Sarmert C1 5K камеру за снимање аутомобила, које детаљно описује инсталацију, рад, функције као што су снимање у петљи и праћење паркирања, прилагођавање подешавања, упаривање са паметним телефоном и решавање проблема.