Упутство за употребу Sena 10S комуникационог система за мотоцикле са Bluetooth слушалицама

1. Производ је готовview

The Sena 10S Bluetooth motorcycle headset and intercom system kit is designed to facilitate seamless communication among riders. It supports full duplex, dual pairing for clear and natural conversations.

Кључне карактеристике:

• Bluetooth 4.1 and Universal Intercom for broad compatibility.
• Crystal-clear HD audio with Advanced Noise Control for superior sound quality.
• Intercom communication range of up to 1.6 km (1.0 mi) in open terrain.
• Supports up to 4 riders for group communication.
• Smartphone pairing for music, GPS navigation, and phone calls.
• Talk time of 12 hours on a single charge.

Слика 1.1: Предња страна view of the Sena 10S Motorcycle Bluetooth Headset.

2. Садржај пакета

The Sena 10S Communication System package typically includes the following items:

• Sena 10S Headset Unit(s)
• Спеакер Сет
• Боом Мицропхоне
• Жични микрофон
• Монтажа Цлamp Кит
• УСБ кабл за напајање и пренос података
• Аудио кабл
• Велцро јастучићи за звучнике
• Микрофонски сунђери

Figure 2.1: All components included in the Sena 10S package.

3. Подешавање и инсталација

3.1 Пуњење уређаја

Before initial use, fully charge the Sena 10S headset. Connect the provided USB power & data cable to the headset's charging port and a USB power source. A full charge typically takes approximately 3 hours. The LED indicator will change color to indicate charging status.

Слика 3.1: Страна view of the Sena 10S unit, showing the USB charging port.

3.2 Mounting on a Helmet

The Sena 10S can be mounted on most motorcycle helmets using the included clamp kit. Follow these general steps:

1. Отпустите завртње на задњој страни цлamp јединица.
2. Померите цлamp unit between the outer shell and the inner padding of your helmet, positioning it on the left side.
3. Затегните завртње да бисте причврстили цлamp.
4. Attach the main headset unit to the clamp.
5. Install the speakers inside the helmet, aligning them with your ears. Use the Velcro pads if necessary.
6. Connect the microphone (boom or wired) to the headset unit and position it appropriately for clear voice pickup.

Figure 3.2: Sena 10S headset mounted on a motorcycle helmet.

4. Упутство за употребу

4.1 Укључивање/искључивање

• Укључено: Press and hold the Phone Button and the Jog Dial for 1 second.
• Искључивање: Tap the Phone Button and the Jog Dial simultaneously.

4.2 Контрола јачине звука

Rotate the Jog Dial clockwise to increase volume and counter-clockwise to decrease volume.

4.3 Упаривање путем Bluetooth-а (паметни телефон)

To pair your smartphone with the Sena 10S for music, GPS, and phone calls:

1. With the headset off, press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately.
2. On your smartphone, enable Bluetooth and search for devices.
3. Select 'Sena 10S' from the list of found devices.
4. If prompted, enter '0000' for the PIN.

4.4 Интерфонска комуникација

The Sena 10S supports intercom communication with up to 4 riders. Ensure all devices are powered on and within range.

• Pairing with another Sena headset: Press and hold the Jog Dial of both units for 5 seconds until the LEDs flash red. Tap the Jog Dial on either unit to complete pairing.
• Starting/Ending Intercom: Tap the Jog Dial once to start or end a conversation with the first paired intercom friend. Tap twice for the second, and three times for the third.

4.5 Music Streaming and Phone Calls

• Пусти/паузирај музику: Притисните и држите Јог Диал 1 секунду.
• Одговори/заврши позив: Додирните дугме за телефон.
• Гласовно бирање: Притисните и држите дугме за телефон 3 секунди.

5. Одржавање и њега

To ensure the longevity and optimal performance of your Sena 10S headset, follow these maintenance guidelines:

• Keep the device dry. Moisture can damage internal circuits.
• Немојте користити јаке хемикалије, раствараче за чишћење или јаке детерџенте за чишћење уређаја.
• Clean the microphone and speaker grilles gently with a soft, dry cloth.
• Чувајте уређај на хладном и сувом месту када се не користи.
• Редовно пуните батерију, чак и ако је не користите, како бисте је одржали у добром стању.

КСНУМКС. Решавање проблема

If you encounter issues with your Sena 10S, try the following steps:

• Нема напајања: Ensure the battery is charged. Connect to a power source and check if the charging indicator lights up.
• Нема звука/ниска јачина звука: Check volume settings on both the headset and your connected device. Ensure speakers are correctly positioned.
• Интерфон се не повезује: Verify both units are powered on and within range. Re-attempt intercom pairing.
• Блуетоотх прекид везе: Ensure your paired device is within range. Try re-pairing the device.
• Ресетовање уређаја: If issues persist, perform a factory reset (refer to the full user manual for specific instructions on your model).

7. Техничке спецификације

8. Званични видео производа

9. Гаранција и подршка

For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Sena website. For technical support, troubleshooting assistance, or further inquiries, please contact Sena customer service through their official channels.